Merge pull request #6973 from AntonioMeireles/etcd2

docs/getting-started-guides/README.md

@@ -18,9 +18,9 @@ Bare-metal     | Ansible      | Fedora | flannel     | [docs](../../docs/getting
 Bare-metal     | custom       | Fedora | _none_      | [docs](../../docs/getting-started-guides/fedora/fedora_manual_config.md) | Project    | Uses K8s v0.13.2
 Bare-metal     | custom       | Ubuntu Cluster | flannel | [docs](../../docs/getting-started-guides/ubuntu_multinodes_cluster.md) | Community (@resouer @WIZARD-CXY) | use k8s version 0.12.0
 Mesos/GCE      |              |        |             | [docs](../../docs/getting-started-guides/mesos.md)     | [Community](https://github.com/mesosphere/kubernetes-mesos) ([@jdef](https://github.com/jdef)) | Uses K8s v0.11.2
-AWS            | CoreOS       | CoreOS | flannel     | [docs](../../docs/getting-started-guides/coreos.md)    | Community                    | Uses K8s version 0.11.0
-GCE            | CoreOS       | CoreOS | flannel     | [docs](../../docs/getting-started-guides/coreos.md)    | Community (@kelseyhightower) | Uses K8s version 0.11.0
-Vagrant        | CoreOS       | CoreOS | flannel     | [docs](../../docs/getting-started-guides/coreos.md)    | Community (@pires)           | Uses K8s version 0.11.0
+AWS            | CoreOS       | CoreOS | flannel     | [docs](../../docs/getting-started-guides/coreos.md)    | Community                    | Uses K8s version 0.15.0
+GCE            | CoreOS       | CoreOS | flannel     | [docs](../../docs/getting-started-guides/coreos.md)    | Community (@kelseyhightower) | Uses K8s version 0.15.0
+Vagrant        | CoreOS       | CoreOS | flannel     | [docs](../../docs/getting-started-guides/coreos.md)    | Community ( [@pires](https://github.com/pires), [@AntonioMeireles](https://github.com/AntonioMeireles) )           | Uses K8s version 0.15.0
 Bare-metal (Offline) | CoreOS       | CoreOS | flannel      | [docs](../../docs/getting-started-guides/coreos/bare_metal_offline.md) | Community([@jeffbean](https://github.com/jeffbean))    | Uses K8s version 0.15.0
 CloudStack     | Ansible      | CoreOS | flannel     | [docs](../../docs/getting-started-guides/cloudstack.md)| Community (@runseb)          | Uses K8s version 0.9.1
 Vmware         |              | Debian | OVS         | [docs](../../docs/getting-started-guides/vsphere.md)   | Community (@pietern)         | Uses K8s version 0.9.1
@@ -29,7 +29,7 @@ AWS            | Juju         | Ubuntu | flannel     | [docs](../../docs/getting
 OpenStack/HPCloud | Juju      | Ubuntu | flannel     | [docs](../../docs/getting-started-guides/juju.md)      | [Community](https://github.com/whitmo/bundle-kubernetes) ( [@whit](https://github.com/whitmo), [@matt](https://github.com/mbruzek), [@chuck](https://github.com/chuckbutler) ) | [Tested](http://reports.vapour.ws/charm-tests-by-charm/kubernetes) K8s v0.8.1
 Joyent         | Juju         | Ubuntu | flannel     | [docs](../../docs/getting-started-guides/juju.md)      | [Community](https://github.com/whitmo/bundle-kubernetes) ( [@whit](https://github.com/whitmo), [@matt](https://github.com/mbruzek), [@chuck](https://github.com/chuckbutler) ) | [Tested](http://reports.vapour.ws/charm-tests-by-charm/kubernetes) K8s v0.8.1
 AWS            | Saltstack    | Ubuntu | OVS         | [docs](../../docs/getting-started-guides/aws.md)       | Community (@justinsb)        | Uses K8s version 0.5.0
-Vmware         | CoreOS       | CoreOS | flannel     | [docs](../../docs/getting-started-guides/coreos.md)    | Community (@kelseyhightower) |
+Vmware         | CoreOS       | CoreOS | flannel     | [docs](../../docs/getting-started-guides/coreos.md)    | Community (@kelseyhightower) | Uses K8s version 0.15.0
 Azure          | Saltstack    | Ubuntu | OpenVPN     | [docs](../../docs/getting-started-guides/azure.md)     | Community                    |
 Bare-metal     | custom       | Ubuntu | _none_      | [docs](../../docs/getting-started-guides/ubuntu_single_node.md) | Community (@jainvipin)       |
 Local          |              |        | _none_      | [docs](../../docs/getting-started-guides/locally.md)   | Community (@preillyme)                     |

docs/getting-started-guides/aws/cloud-configs/master.yaml

 #cloud-config
 
 ---
-write_files:
-- path: /opt/bin/waiter.sh
-  owner: root
-  content: |
-    #! /usr/bin/bash
-    until curl http://127.0.0.1:4001/v2/machines; do sleep 2; done
+hostname: master
 coreos:
+  etcd2:
+    name: master
+    listen-client-urls: http://0.0.0.0:2379,http://0.0.0.0:4001
+    advertise-client-urls: http://<master-private-ip>:2379,http://<master-private-ip>:4001
+    initial-cluster-token: k8s_etcd
+    listen-peer-urls: http://<master-private-ip>:2380,http://<master-private-ip>:7001
+    initial-advertise-peer-urls: http://<master-private-ip>:2380
+    initial-cluster: master=http://<master-private-ip>:2380"
+    initial-cluster-state: new
   fleet:
-    etcd-servers: http://localhost:4001
     metadata: "role=master"
-  flannel:
-    interface: eth1
   units:
     - name: setup-network-environment.service
       command: start
@@ -25,57 +26,20 @@ coreos:
 
         [Service]
         ExecStartPre=-/usr/bin/mkdir -p /opt/bin
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/k8s/setup-network-environment
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/k8s/setup-network-environment 
         ExecStartPre=/usr/bin/chmod +x /opt/bin/setup-network-environment
         ExecStart=/opt/bin/setup-network-environment
         RemainAfterExit=yes
         Type=oneshot
-    - name: etcd.service
+    - name: fleet.service
       command: start
-      content: |
-        [Unit]
-        Description=etcd
-        Requires=setup-network-environment.service
-        After=setup-network-environment.service
-
-        [Service]
-        EnvironmentFile=/etc/network-environment
-        User=etcd
-        PermissionsStartOnly=true
-        ExecStart=/usr/bin/etcd \
-        --name ${DEFAULT_IPV4} \
-        --addr ${DEFAULT_IPV4}:4001 \
-        --bind-addr 0.0.0.0 \
-        --cluster-active-size 1 \
-        --data-dir /var/lib/etcd \
-        --http-read-timeout 86400 \
-        --peer-addr ${DEFAULT_IPV4}:7001 \
-        --snapshot true
-        Restart=always
-        RestartSec=10s
-    - name: etcd-waiter.service
-      command: start
-      content: |
-        [Unit]
-        Description=etcd waiter
-        Wants=network-online.target
-        Wants=etcd.service
-        After=etcd.service
-        After=network-online.target
-        Before=flanneld.service
-
-        [Service]
-        ExecStartPre=/usr/bin/chmod +x /opt/bin/waiter.sh
-        ExecStart=/usr/bin/bash /opt/bin/waiter.sh
-        RemainAfterExit=true
-        Type=oneshot
     - name: flanneld.service
       command: start
       drop-ins:
         - name: 50-network-config.conf
           content: |
             [Unit]
-            Requires=etcd.service
+            Requires=etcd2.service
             [Service]
             ExecStartPre=/usr/bin/etcdctl set /coreos.com/network/config '{"Network":"10.244.0.0/16", "Backend": {"Type": "vxlan"}}'
     - name: docker-cache.service
@@ -122,23 +86,26 @@ coreos:
         [Unit]
         Description=Kubernetes API Server
         Documentation=https://github.com/GoogleCloudPlatform/kubernetes
-        Requires=etcd.service
-        After=etcd.service
+        Requires=etcd2.service
+        After=etcd2.service
 
         [Service]
         ExecStartPre=-/usr/bin/mkdir -p /opt/bin
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-apiserver
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-apiserver
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-apiserver
         ExecStart=/opt/bin/kube-apiserver \
-        --address=0.0.0.0 \
-        --port=8080 \
+        --allow_privileged=true \
+        --insecure_bind_address=0.0.0.0 \
+        --insecure_port=8080 \
+        --kubelet_https=true \
+        --secure_port=6443 \
         --portal_net=10.100.0.0/16 \
         --etcd_servers=http://127.0.0.1:4001 \
         --public_address_override=$private_ipv4 \
         --logtostderr=true
         Restart=always
         RestartSec=10
-    - name: kube-controller-manager.service 
+    - name: kube-controller-manager.service
       command: start
       content: |
         [Unit]
@@ -148,7 +115,7 @@ coreos:
         After=kube-apiserver.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-controller-manager
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-controller-manager
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-controller-manager
         ExecStart=/opt/bin/kube-controller-manager \
         --master=127.0.0.1:8080 \
@@ -165,7 +132,7 @@ coreos:
         After=kube-apiserver.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-scheduler
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-scheduler
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-scheduler
         ExecStart=/opt/bin/kube-scheduler --master=127.0.0.1:8080
         Restart=always
@@ -182,12 +149,14 @@ coreos:
         After=fleet.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/k8s/kube-register
+        # ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/k8s/kube-register
+        ExecStartPre=/usr/bin/wget -N -O /opt/bin/kube-register https://github.com/kelseyhightower/kube-register/releases/download/v0.0.3/kube-register-0.0.3-linux-amd64
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-register
         ExecStart=/opt/bin/kube-register \
         --metadata=role=node \
         --fleet-endpoint=unix:///var/run/fleet.sock \
-        --api-endpoint=http://127.0.0.1:8080
+        --api-endpoint=http://127.0.0.1:8080 \
+        --healthz-port=10248
         Restart=always
         RestartSec=10
   update:

docs/getting-started-guides/aws/cloud-configs/node.yaml

 #cloud-config
-
+write-files:
+  - path: /opt/bin/wupiao
+    permissions: '0755'
+    content: |
+      #!/bin/bash
+      # [w]ait [u]ntil [p]ort [i]s [a]ctually [o]pen
+      [ -n "$1" ] && [ -n "$2" ] && while ! curl --output /dev/null \
+        --silent --head --fail \
+        http://${1}:${2}; do sleep 1 && echo -n .; done;
+      exit $?
 coreos:
+  etcd2:
+    listen-client-urls: http://0.0.0.0:2379,http://0.0.0.0:4001
+    initial-cluster: master=http://<master-private-ip>:2380
+    proxy: on
   fleet:
-    etcd-servers: http://<master-private-ip>:4001
     metadata: "role=node"
-  flannel:
-    interface: eth1
-    etcd_endpoints: http://<master-private-ip>:4001
   units:
-    - name: etcd.service
-      mask: true
     - name: fleet.service
       command: start
     - name: flanneld.service
@@ -17,17 +24,16 @@ coreos:
       drop-ins:
         - name: 50-network-config.conf
           content: |
+            [Unit]
+            Requires=etcd2.service
             [Service]
-            ExecStartPre=/bin/bash -c "until curl http://<master-private-ip>:4001/v2/machines; do sleep 2; done"
-            ExecStartPre=/usr/bin/etcdctl -C <master-private-ip>:4001 set /coreos.com/network/config '{"Network":"10.244.0.0/16", "Backend": {"Type": "vxlan"}}'
+            ExecStartPre=/usr/bin/etcdctl set /coreos.com/network/config '{"Network":"10.244.0.0/16", "Backend": {"Type": "vxlan"}}'
     - name: docker.service
       command: start
       drop-ins:
         - name: 51-docker-mirror.conf
           content: |
             [Unit]
-            # making sure that flanneld finished startup, otherwise containers
-            # won't land in flannel's network...
             Requires=flanneld.service
             After=flanneld.service
             [Service]
@@ -43,7 +49,7 @@ coreos:
 
         [Service]
         ExecStartPre=-/usr/bin/mkdir -p /opt/bin
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/k8s/setup-network-environment
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/k8s/setup-network-environment 
         ExecStartPre=/usr/bin/chmod +x /opt/bin/setup-network-environment
         ExecStart=/opt/bin/setup-network-environment
         RemainAfterExit=yes
@@ -58,10 +64,12 @@ coreos:
         After=setup-network-environment.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-proxy
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-proxy
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-proxy
+        # wait for kubernetes master to be up and ready
+        ExecStartPre=/opt/bin/wupiao <master-private-ip> 8080
         ExecStart=/opt/bin/kube-proxy \
-        --master=http://<master-private-ip>:8080 \
+        --master=<master-private-ip>:8080 \
         --logtostderr=true
         Restart=always
         RestartSec=10
@@ -76,14 +84,19 @@ coreos:
 
         [Service]
         EnvironmentFile=/etc/network-environment
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kubelet
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kubelet
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kubelet
+        # wait for kubernetes master to be up and ready
+        ExecStartPre=/opt/bin/wupiao <master-private-ip> 8080
         ExecStart=/opt/bin/kubelet \
         --address=0.0.0.0 \
         --port=10250 \
         --hostname_override=$private_ipv4 \
         --api_servers=<master-private-ip>:8080 \
-        --logtostderr=true
+        --allow_privileged=true \
+        --logtostderr=true \
+        --healthz_bind_address=0.0.0.0 \
+        --healthz_port=10248
         Restart=always
         RestartSec=10
   update:

docs/getting-started-guides/coreos/cloud-configs/master.yaml

 #cloud-config
 
 ---
-write_files:
-- path: /opt/bin/waiter.sh
-  owner: root
-  content: |
-    #! /usr/bin/bash
-    until curl http://127.0.0.1:4001/v2/machines; do sleep 2; done
+hostname: master
 coreos:
+  etcd2:
+    name: master
+    listen-client-urls: http://0.0.0.0:2379,http://0.0.0.0:4001
+    advertise-client-urls: http://<master-private-ip>:2379,http://<master-private-ip>:4001
+    initial-cluster-token: k8s_etcd
+    listen-peer-urls: http://<master-private-ip>:2380,http://<master-private-ip>:7001
+    initial-advertise-peer-urls: http://<master-private-ip>:2380
+    initial-cluster: master=http://<master-private-ip>:2380"
+    initial-cluster-state: new
   fleet:
-    etcd-servers: http://localhost:4001
     metadata: "role=master"
-  flannel:
   units:
     - name: setup-network-environment.service
       command: start
@@ -29,54 +31,15 @@ coreos:
         ExecStart=/opt/bin/setup-network-environment
         RemainAfterExit=yes
         Type=oneshot
-    - name: etcd.service
-      command: start
-      content: |
-        [Unit]
-        Description=etcd
-        Requires=setup-network-environment.service
-        After=setup-network-environment.service
-
-        [Service]
-        EnvironmentFile=/etc/network-environment
-        User=etcd
-        PermissionsStartOnly=true
-        ExecStart=/usr/bin/etcd \
-        --name ${DEFAULT_IPV4} \
-        --addr ${DEFAULT_IPV4}:4001 \
-        --bind-addr 0.0.0.0 \
-        --cluster-active-size 1 \
-        --data-dir /var/lib/etcd \
-        --http-read-timeout 86400 \
-        --peer-addr ${DEFAULT_IPV4}:7001 \
-        --snapshot true
-        Restart=always
-        RestartSec=10s
     - name: fleet.service
       command: start
-    - name: etcd-waiter.service
-      command: start
-      content: |
-        [Unit]
-        Description=etcd waiter
-        Wants=network-online.target
-        Wants=etcd.service
-        After=etcd.service
-        After=network-online.target
-        Before=flanneld.service
-
-        [Service]
-        ExecStartPre=/usr/bin/chmod +x /opt/bin/waiter.sh
-        ExecStart=/usr/bin/bash /opt/bin/waiter.sh
-        RemainAfterExit=true
-        Type=oneshot
     - name: flanneld.service
       command: start
       drop-ins:
         - name: 50-network-config.conf
           content: |
             [Unit]
-            Requires=etcd.service
+            Requires=etcd2.service
             [Service]
             ExecStartPre=/usr/bin/etcdctl set /coreos.com/network/config '{"Network":"10.244.0.0/16", "Backend": {"Type": "vxlan"}}'
     - name: docker-cache.service
@@ -123,16 +86,19 @@ coreos:
         [Unit]
         Description=Kubernetes API Server
         Documentation=https://github.com/GoogleCloudPlatform/kubernetes
-        Requires=etcd.service
-        After=etcd.service
+        Requires=etcd2.service
+        After=etcd2.service
 
         [Service]
         ExecStartPre=-/usr/bin/mkdir -p /opt/bin
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-apiserver
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-apiserver
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-apiserver
         ExecStart=/opt/bin/kube-apiserver \
-        --address=0.0.0.0 \
-        --port=8080 \
+        --allow_privileged=true \
+        --insecure_bind_address=0.0.0.0 \
+        --insecure_port=8080 \
+        --kubelet_https=true \
+        --secure_port=6443 \
         --portal_net=10.100.0.0/16 \
         --etcd_servers=http://127.0.0.1:4001 \
         --public_address_override=$private_ipv4 \
@@ -149,7 +115,7 @@ coreos:
         After=kube-apiserver.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-controller-manager
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-controller-manager
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-controller-manager
         ExecStart=/opt/bin/kube-controller-manager \
         --master=127.0.0.1:8080 \
@@ -166,7 +132,7 @@ coreos:
         After=kube-apiserver.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-scheduler
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-scheduler
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-scheduler
         ExecStart=/opt/bin/kube-scheduler --master=127.0.0.1:8080
         Restart=always
@@ -183,12 +149,14 @@ coreos:
         After=fleet.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/k8s/kube-register
+        # ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/k8s/kube-register
+        ExecStartPre=/usr/bin/wget -N -O /opt/bin/kube-register https://github.com/kelseyhightower/kube-register/releases/download/v0.0.3/kube-register-0.0.3-linux-amd64
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-register
         ExecStart=/opt/bin/kube-register \
         --metadata=role=node \
         --fleet-endpoint=unix:///var/run/fleet.sock \
-        --api-endpoint=http://127.0.0.1:8080
+        --api-endpoint=http://127.0.0.1:8080 \
+        --healthz-port=10248
         Restart=always
         RestartSec=10
   update:

docs/getting-started-guides/coreos/cloud-configs/node.yaml

 #cloud-config
-
+write-files:
+  - path: /opt/bin/wupiao
+    permissions: '0755'
+    content: |
+      #!/bin/bash
+      # [w]ait [u]ntil [p]ort [i]s [a]ctually [o]pen
+      [ -n "$1" ] && [ -n "$2" ] && while ! curl --output /dev/null \
+        --silent --head --fail \
+        http://${1}:${2}; do sleep 1 && echo -n .; done;
+      exit $?
 coreos:
+  etcd2:
+    listen-client-urls: http://0.0.0.0:2379,http://0.0.0.0:4001
+    initial-cluster: master=http://<master-private-ip>:2380
+    proxy: on
   fleet:
-    etcd-servers: http://<master-private-ip>:4001
     metadata: "role=node"
-  flannel:
-    etcd_endpoints: http://<master-private-ip>:4001
   units:
-    - name: etcd.service
-      mask: true
     - name: fleet.service
       command: start
     - name: flanneld.service
@@ -16,9 +24,9 @@ coreos:
       drop-ins:
         - name: 50-network-config.conf
           content: |
+            [Unit]
+            Requires=etcd2.service
             [Service]
-            Environment=ETCDCTL_PEERS=http://<master-private-ip>:4001
-            ExecStartPre=/bin/bash -c "until curl http://<master-private-ip>:4001/v2/machines; do sleep 2; done"
             ExecStartPre=/usr/bin/etcdctl set /coreos.com/network/config '{"Network":"10.244.0.0/16", "Backend": {"Type": "vxlan"}}'
     - name: docker.service
       command: start
@@ -26,8 +34,6 @@ coreos:
         - name: 51-docker-mirror.conf
           content: |
             [Unit]
-            # making sure that flanneld finished startup, otherwise containers
-            # won't land in flannel's network...
             Requires=flanneld.service
             After=flanneld.service
             [Service]
@@ -58,8 +64,10 @@ coreos:
         After=setup-network-environment.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-proxy
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-proxy
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-proxy
+        # wait for kubernetes master to be up and ready
+        ExecStartPre=/opt/bin/wupiao <master-private-ip> 8080
         ExecStart=/opt/bin/kube-proxy \
         --master=<master-private-ip>:8080 \
         --logtostderr=true
@@ -76,14 +84,19 @@ coreos:
 
         [Service]
         EnvironmentFile=/etc/network-environment
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kubelet
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kubelet
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kubelet
+        # wait for kubernetes master to be up and ready
+        ExecStartPre=/opt/bin/wupiao <master-private-ip> 8080
         ExecStart=/opt/bin/kubelet \
         --address=0.0.0.0 \
         --port=10250 \
         --hostname_override=$private_ipv4 \
         --api_servers=<master-private-ip>:8080 \
-        --logtostderr=true
+        --allow_privileged=true \
+        --logtostderr=true \
+        --healthz_bind_address=0.0.0.0 \
+        --healthz_port=10248
         Restart=always
         RestartSec=10
   update:

docs/getting-started-guides/coreos/cloud-configs/standalone.yaml

@@ -2,43 +2,29 @@
 
 ---
 write_files:
-- path: /opt/bin/waiter.sh
-  owner: root
-  content: |
-    #! /usr/bin/bash
-    until curl http://127.0.0.1:4001/v2/machines; do sleep 2; done
-hostname: standalone
+hostname: master
 coreos:
-  flannel:
-    interface: eth1
+  etcd2:
+    name: master
+    listen-client-urls: http://0.0.0.0:2379,http://0.0.0.0:4001
+    advertise-client-urls: http://0.0.0.0:2379,http://0.0.0.0:4001
+    initial-cluster-token: k8s_etcd
+    listen-peer-urls: http://0.0.0.0:2380,http://0.0.0.0:7001
+    initial-advertise-peer-urls: http://0.0.0.0:2380
+    initial-cluster: master=http://0.0.0.0:2380"
+    initial-cluster-state: new
   units:
     - name: etcd.service
       command: start
     - name: fleet.service
       command: start
-    - name: etcd-waiter.service
-      command: start
-      content: |
-        [Unit]
-        Description=etcd waiter
-        Wants=network-online.target
-        Wants=etcd.service
-        After=etcd.service
-        After=network-online.target
-        Before=flanneld.service
-
-        [Service]
-        ExecStartPre=/usr/bin/chmod +x /opt/bin/waiter.sh
-        ExecStart=/usr/bin/bash /opt/bin/waiter.sh
-        RemainAfterExit=true
-        Type=oneshot
     - name: flanneld.service
       command: start
       drop-ins:
         - name: 50-network-config.conf
           content: |
             [Unit]
-            Requires=etcd.service
+            Requires=etcd2.service
             [Service]
             ExecStartPre=/usr/bin/etcdctl set /coreos.com/network/config '{"Network":"10.244.0.0/16", "Backend": {"Type": "vxlan"}}'
     - name: docker-cache.service
@@ -86,17 +72,20 @@ coreos:
         [Unit]
         Description=Kubernetes API Server
         Documentation=https://github.com/GoogleCloudPlatform/kubernetes
-        Requires=etcd.service
-        After=etcd.service
+        Requires=etcd2.service
+        After=etcd2.service
 
         [Service]
         ExecStartPre=-/usr/bin/mkdir -p /opt/bin
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-apiserver
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-apiserver
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-apiserver
         ExecStart=/opt/bin/kube-apiserver \
-        --address=0.0.0.0 \
+        --allow_privileged=true \
+        --insecure_bind_address=0.0.0.0 \
+        --insecure_port=8080 \
+        --kubelet_https=true \
+        --secure_port=6443 \
         --portal_net=10.100.0.0/16 \
-        --port=8080 \
         --etcd_servers=http://127.0.0.1:4001 \
         --public_address_override=127.0.0.1 \
         --logtostderr=true
@@ -112,7 +101,7 @@ coreos:
         After=kube-apiserver.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-controller-manager
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-controller-manager
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-controller-manager
         ExecStart=/opt/bin/kube-controller-manager \
         --machines=127.0.0.1 \
@@ -130,7 +119,7 @@ coreos:
         After=kube-apiserver.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-scheduler
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-scheduler
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-scheduler
         ExecStart=/opt/bin/kube-scheduler --master=127.0.0.1:8080
         Restart=always
@@ -141,11 +130,11 @@ coreos:
         [Unit]
         Description=Kubernetes Proxy
         Documentation=https://github.com/GoogleCloudPlatform/kubernetes
-        Requires=etcd.service
-        After=etcd.service
+        Requires=etcd2.service
+        After=etcd2.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kube-proxy
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kube-proxy
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kube-proxy
         ExecStart=/opt/bin/kube-proxy \
         --master=127.0.0.1:8080 \
@@ -158,18 +147,21 @@ coreos:
         [Unit]
         Description=Kubernetes Kubelet
         Documentation=https://github.com/GoogleCloudPlatform/kubernetes
-        Requires=etcd.service
-        After=etcd.service
+        Requires=etcd2.service
+        After=etcd2.service
 
         [Service]
-        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.11.0/bin/linux/amd64/kubelet
+        ExecStartPre=/usr/bin/wget -N -P /opt/bin https://storage.googleapis.com/kubernetes-release/release/v0.15.0/bin/linux/amd64/kubelet
         ExecStartPre=/usr/bin/chmod +x /opt/bin/kubelet
         ExecStart=/opt/bin/kubelet \
         --address=0.0.0.0 \
         --port=10250 \
         --hostname_override=127.0.0.1 \
         --api_servers=127.0.0.1:8080 \
-        --logtostderr=true
+        --allow_privileged=true \
+        --logtostderr=true \
+        --healthz_bind_address=0.0.0.0 \
+        --healthz_port=10248
         Restart=always
         RestartSec=10
   update:

docs/getting-started-guides/coreos/coreos_multinode_cluster.md

@@ -2,7 +2,7 @@
 
 Use the [master.yaml](cloud-configs/master.yaml) and [node.yaml](cloud-configs/node.yaml) cloud-configs to provision a multi-node Kubernetes cluster.
 
-*Attention:* This requires at least CoreOS version 593.0.0/598.0.0.
+> **Attention**: This requires at least CoreOS version **653.0.0**.
 
 ## Overview
 

docs/getting-started-guides/coreos/coreos_single_node_cluster.md

@@ -2,7 +2,7 @@
 
 Use the [standalone.yaml](cloud-configs/standalone.yaml) cloud-config to provision a single node Kubernetes cluster.
 
-*Attention:* This requires at least CoreOS version 593.0.0/598.0.0.
+> **Attention**: This requires at least CoreOS version **653.0.0**.
 
 ### CoreOS image versions