Merge pull request #29153 from vishh/cadvisor-bump

hack/godep-save.sh

@@ -31,4 +31,7 @@ REQUIRED_BINS=(
 
 pushd "${KUBE_ROOT}" > /dev/null
   GO15VENDOREXPERIMENT=1 ${GODEP} save "${REQUIRED_BINS[@]}"
+  # A temporary workaround to prevent godep from not including recursive dependencies.
+  # This can be removed once a restore followed by a save does not drop dependencies.
+  GO15VENDOREXPERIMENT=1 ${GODEP} save "${REQUIRED_BINS[@]}"
 popd > /dev/null

hack/verify-godeps.sh

@@ -95,6 +95,8 @@ git init > /dev/null 2>&1
 
 # Recreate the Godeps using the nice clean set we just downloaded
 hack/godep-save.sh
+# Run it again to make godep include recursive dependencies.
+hack/godep-save.sh
 
 # Test for diffs
 if ! _out="$(diff -Naupr --ignore-matching-lines='^\s*\"GoVersion\":' --ignore-matching-line='^\s*\"GodepVersion\":' --ignore-matching-lines='^\s*\"Comment\":' ${KUBE_ROOT}/Godeps/Godeps.json ${_kubetmp}/Godeps/Godeps.json)"; then

vendor/github.com/Azure/go-ansiterm/LICENSE

+The MIT License (MIT)
+
+Copyright (c) 2015 Microsoft Corporation
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

vendor/github.com/Azure/go-ansiterm/README.md

+# go-ansiterm
+
+This is a cross platform Ansi Terminal Emulation library.  It reads a stream of Ansi characters and produces the appropriate function calls.  The results of the function calls are platform dependent.
+
+For example the parser might receive "ESC, [, A" as a stream of three characters.  This is the code for Cursor Up (http://www.vt100.net/docs/vt510-rm/CUU).  The parser then calls the cursor up function (CUU()) on an event handler.  The event handler determines what platform specific work must be done to cause the cursor to move up one position.
+
+The parser (parser.go) is a partial implementation of this state machine (http://vt100.net/emu/vt500_parser.png).  There are also two event handler implementations, one for tests (test_event_handler.go) to validate that the expected events are being produced and called, the other is a Windows implementation (winterm/win_event_handler.go).
+
+See parser_test.go for examples exercising the state machine and generating appropriate function calls.
+
+-----
+This project has adopted the [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/). For more information see the [Code of Conduct FAQ](https://opensource.microsoft.com/codeofconduct/faq/) or contact [opencode@microsoft.com](mailto:opencode@microsoft.com) with any additional questions or comments.

vendor/github.com/Azure/go-ansiterm/constants.go

+package ansiterm
+
+const LogEnv = "DEBUG_TERMINAL"
+
+// ANSI constants
+// References:
+// -- http://www.ecma-international.org/publications/standards/Ecma-048.htm
+// -- http://man7.org/linux/man-pages/man4/console_codes.4.html
+// -- http://manpages.ubuntu.com/manpages/intrepid/man4/console_codes.4.html
+// -- http://en.wikipedia.org/wiki/ANSI_escape_code
+// -- http://vt100.net/emu/dec_ansi_parser
+// -- http://vt100.net/emu/vt500_parser.svg
+// -- http://invisible-island.net/xterm/ctlseqs/ctlseqs.html
+// -- http://www.inwap.com/pdp10/ansicode.txt
+const (
+	// ECMA-48 Set Graphics Rendition
+	// Note:
+	// -- Constants leading with an underscore (e.g., _ANSI_xxx) are unsupported or reserved
+	// -- Fonts could possibly be supported via SetCurrentConsoleFontEx
+	// -- Windows does not expose the per-window cursor (i.e., caret) blink times
+	ANSI_SGR_RESET              = 0
+	ANSI_SGR_BOLD               = 1
+	ANSI_SGR_DIM                = 2
+	_ANSI_SGR_ITALIC            = 3
+	ANSI_SGR_UNDERLINE          = 4
+	_ANSI_SGR_BLINKSLOW         = 5
+	_ANSI_SGR_BLINKFAST         = 6
+	ANSI_SGR_REVERSE            = 7
+	_ANSI_SGR_INVISIBLE         = 8
+	_ANSI_SGR_LINETHROUGH       = 9
+	_ANSI_SGR_FONT_00           = 10
+	_ANSI_SGR_FONT_01           = 11
+	_ANSI_SGR_FONT_02           = 12
+	_ANSI_SGR_FONT_03           = 13
+	_ANSI_SGR_FONT_04           = 14
+	_ANSI_SGR_FONT_05           = 15
+	_ANSI_SGR_FONT_06           = 16
+	_ANSI_SGR_FONT_07           = 17
+	_ANSI_SGR_FONT_08           = 18
+	_ANSI_SGR_FONT_09           = 19
+	_ANSI_SGR_FONT_10           = 20
+	_ANSI_SGR_DOUBLEUNDERLINE   = 21
+	ANSI_SGR_BOLD_DIM_OFF       = 22
+	_ANSI_SGR_ITALIC_OFF        = 23
+	ANSI_SGR_UNDERLINE_OFF      = 24
+	_ANSI_SGR_BLINK_OFF         = 25
+	_ANSI_SGR_RESERVED_00       = 26
+	ANSI_SGR_REVERSE_OFF        = 27
+	_ANSI_SGR_INVISIBLE_OFF     = 28
+	_ANSI_SGR_LINETHROUGH_OFF   = 29
+	ANSI_SGR_FOREGROUND_BLACK   = 30
+	ANSI_SGR_FOREGROUND_RED     = 31
+	ANSI_SGR_FOREGROUND_GREEN   = 32
+	ANSI_SGR_FOREGROUND_YELLOW  = 33
+	ANSI_SGR_FOREGROUND_BLUE    = 34
+	ANSI_SGR_FOREGROUND_MAGENTA = 35
+	ANSI_SGR_FOREGROUND_CYAN    = 36
+	ANSI_SGR_FOREGROUND_WHITE   = 37
+	_ANSI_SGR_RESERVED_01       = 38
+	ANSI_SGR_FOREGROUND_DEFAULT = 39
+	ANSI_SGR_BACKGROUND_BLACK   = 40
+	ANSI_SGR_BACKGROUND_RED     = 41
+	ANSI_SGR_BACKGROUND_GREEN   = 42
+	ANSI_SGR_BACKGROUND_YELLOW  = 43
+	ANSI_SGR_BACKGROUND_BLUE    = 44
+	ANSI_SGR_BACKGROUND_MAGENTA = 45
+	ANSI_SGR_BACKGROUND_CYAN    = 46
+	ANSI_SGR_BACKGROUND_WHITE   = 47
+	_ANSI_SGR_RESERVED_02       = 48
+	ANSI_SGR_BACKGROUND_DEFAULT = 49
+	// 50 - 65: Unsupported
+
+	ANSI_MAX_CMD_LENGTH = 4096
+
+	MAX_INPUT_EVENTS = 128
+	DEFAULT_WIDTH    = 80
+	DEFAULT_HEIGHT   = 24
+
+	ANSI_BEL              = 0x07
+	ANSI_BACKSPACE        = 0x08
+	ANSI_TAB              = 0x09
+	ANSI_LINE_FEED        = 0x0A
+	ANSI_VERTICAL_TAB     = 0x0B
+	ANSI_FORM_FEED        = 0x0C
+	ANSI_CARRIAGE_RETURN  = 0x0D
+	ANSI_ESCAPE_PRIMARY   = 0x1B
+	ANSI_ESCAPE_SECONDARY = 0x5B
+	ANSI_OSC_STRING_ENTRY = 0x5D
+	ANSI_COMMAND_FIRST    = 0x40
+	ANSI_COMMAND_LAST     = 0x7E
+	DCS_ENTRY             = 0x90
+	CSI_ENTRY             = 0x9B
+	OSC_STRING            = 0x9D
+	ANSI_PARAMETER_SEP    = ";"
+	ANSI_CMD_G0           = '('
+	ANSI_CMD_G1           = ')'
+	ANSI_CMD_G2           = '*'
+	ANSI_CMD_G3           = '+'
+	ANSI_CMD_DECPNM       = '>'
+	ANSI_CMD_DECPAM       = '='
+	ANSI_CMD_OSC          = ']'
+	ANSI_CMD_STR_TERM     = '\\'
+
+	KEY_CONTROL_PARAM_2 = ";2"
+	KEY_CONTROL_PARAM_3 = ";3"
+	KEY_CONTROL_PARAM_4 = ";4"
+	KEY_CONTROL_PARAM_5 = ";5"
+	KEY_CONTROL_PARAM_6 = ";6"
+	KEY_CONTROL_PARAM_7 = ";7"
+	KEY_CONTROL_PARAM_8 = ";8"
+	KEY_ESC_CSI         = "\x1B["
+	KEY_ESC_N           = "\x1BN"
+	KEY_ESC_O           = "\x1BO"
+
+	FILL_CHARACTER = ' '
+)
+
+func getByteRange(start byte, end byte) []byte {
+	bytes := make([]byte, 0, 32)
+	for i := start; i <= end; i++ {
+		bytes = append(bytes, byte(i))
+	}
+
+	return bytes
+}
+
+var toGroundBytes = getToGroundBytes()
+var executors = getExecuteBytes()
+
+// SPACE		  20+A0 hex  Always and everywhere a blank space
+// Intermediate	  20-2F hex   !"#$%&'()*+,-./
+var intermeds = getByteRange(0x20, 0x2F)
+
+// Parameters	  30-3F hex  0123456789:;<=>?
+// CSI Parameters 30-39, 3B hex 0123456789;
+var csiParams = getByteRange(0x30, 0x3F)
+
+var csiCollectables = append(getByteRange(0x30, 0x39), getByteRange(0x3B, 0x3F)...)
+
+// Uppercase	  40-5F hex  @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_
+var upperCase = getByteRange(0x40, 0x5F)
+
+// Lowercase	  60-7E hex  `abcdefghijlkmnopqrstuvwxyz{|}~
+var lowerCase = getByteRange(0x60, 0x7E)
+
+// Alphabetics	  40-7E hex  (all of upper and lower case)
+var alphabetics = append(upperCase, lowerCase...)
+
+var printables = getByteRange(0x20, 0x7F)
+
+var escapeIntermediateToGroundBytes = getByteRange(0x30, 0x7E)
+var escapeToGroundBytes = getEscapeToGroundBytes()
+
+// See http://www.vt100.net/emu/vt500_parser.png for description of the complex
+// byte ranges below
+
+func getEscapeToGroundBytes() []byte {
+	escapeToGroundBytes := getByteRange(0x30, 0x4F)
+	escapeToGroundBytes = append(escapeToGroundBytes, getByteRange(0x51, 0x57)...)
+	escapeToGroundBytes = append(escapeToGroundBytes, 0x59)
+	escapeToGroundBytes = append(escapeToGroundBytes, 0x5A)
+	escapeToGroundBytes = append(escapeToGroundBytes, 0x5C)
+	escapeToGroundBytes = append(escapeToGroundBytes, getByteRange(0x60, 0x7E)...)
+	return escapeToGroundBytes
+}
+
+func getExecuteBytes() []byte {
+	executeBytes := getByteRange(0x00, 0x17)
+	executeBytes = append(executeBytes, 0x19)
+	executeBytes = append(executeBytes, getByteRange(0x1C, 0x1F)...)
+	return executeBytes
+}
+
+func getToGroundBytes() []byte {
+	groundBytes := []byte{0x18}
+	groundBytes = append(groundBytes, 0x1A)
+	groundBytes = append(groundBytes, getByteRange(0x80, 0x8F)...)
+	groundBytes = append(groundBytes, getByteRange(0x91, 0x97)...)
+	groundBytes = append(groundBytes, 0x99)
+	groundBytes = append(groundBytes, 0x9A)
+	groundBytes = append(groundBytes, 0x9C)
+	return groundBytes
+}
+
+// Delete		     7F hex  Always and everywhere ignored
+// C1 Control	  80-9F hex  32 additional control characters
+// G1 Displayable A1-FE hex  94 additional displayable characters
+// Special		  A0+FF hex  Same as SPACE and DELETE

vendor/github.com/Azure/go-ansiterm/context.go

+package ansiterm
+
+type ansiContext struct {
+	currentChar byte
+	paramBuffer []byte
+	interBuffer []byte
+}

vendor/github.com/Azure/go-ansiterm/csi_entry_state.go

+package ansiterm
+
+type csiEntryState struct {
+	baseState
+}
+
+func (csiState csiEntryState) Handle(b byte) (s state, e error) {
+	logger.Infof("CsiEntry::Handle %#x", b)
+
+	nextState, err := csiState.baseState.Handle(b)
+	if nextState != nil || err != nil {
+		return nextState, err
+	}
+
+	switch {
+	case sliceContains(alphabetics, b):
+		return csiState.parser.ground, nil
+	case sliceContains(csiCollectables, b):
+		return csiState.parser.csiParam, nil
+	case sliceContains(executors, b):
+		return csiState, csiState.parser.execute()
+	}
+
+	return csiState, nil
+}
+
+func (csiState csiEntryState) Transition(s state) error {
+	logger.Infof("CsiEntry::Transition %s --> %s", csiState.Name(), s.Name())
+	csiState.baseState.Transition(s)
+
+	switch s {
+	case csiState.parser.ground:
+		return csiState.parser.csiDispatch()
+	case csiState.parser.csiParam:
+		switch {
+		case sliceContains(csiParams, csiState.parser.context.currentChar):
+			csiState.parser.collectParam()
+		case sliceContains(intermeds, csiState.parser.context.currentChar):
+			csiState.parser.collectInter()
+		}
+	}
+
+	return nil
+}
+
+func (csiState csiEntryState) Enter() error {
+	csiState.parser.clear()
+	return nil
+}

vendor/github.com/Azure/go-ansiterm/csi_param_state.go

+package ansiterm
+
+type csiParamState struct {
+	baseState
+}
+
+func (csiState csiParamState) Handle(b byte) (s state, e error) {
+	logger.Infof("CsiParam::Handle %#x", b)
+
+	nextState, err := csiState.baseState.Handle(b)
+	if nextState != nil || err != nil {
+		return nextState, err
+	}
+
+	switch {
+	case sliceContains(alphabetics, b):
+		return csiState.parser.ground, nil
+	case sliceContains(csiCollectables, b):
+		csiState.parser.collectParam()
+		return csiState, nil
+	case sliceContains(executors, b):
+		return csiState, csiState.parser.execute()
+	}
+
+	return csiState, nil
+}
+
+func (csiState csiParamState) Transition(s state) error {
+	logger.Infof("CsiParam::Transition %s --> %s", csiState.Name(), s.Name())
+	csiState.baseState.Transition(s)
+
+	switch s {
+	case csiState.parser.ground:
+		return csiState.parser.csiDispatch()
+	}
+
+	return nil
+}

vendor/github.com/Azure/go-ansiterm/escape_intermediate_state.go

+package ansiterm
+
+type escapeIntermediateState struct {
+	baseState
+}
+
+func (escState escapeIntermediateState) Handle(b byte) (s state, e error) {
+	logger.Infof("escapeIntermediateState::Handle %#x", b)
+	nextState, err := escState.baseState.Handle(b)
+	if nextState != nil || err != nil {
+		return nextState, err
+	}
+
+	switch {
+	case sliceContains(intermeds, b):
+		return escState, escState.parser.collectInter()
+	case sliceContains(executors, b):
+		return escState, escState.parser.execute()
+	case sliceContains(escapeIntermediateToGroundBytes, b):
+		return escState.parser.ground, nil
+	}
+
+	return escState, nil
+}
+
+func (escState escapeIntermediateState) Transition(s state) error {
+	logger.Infof("escapeIntermediateState::Transition %s --> %s", escState.Name(), s.Name())
+	escState.baseState.Transition(s)
+
+	switch s {
+	case escState.parser.ground:
+		return escState.parser.escDispatch()
+	}
+
+	return nil
+}

vendor/github.com/Azure/go-ansiterm/escape_state.go

+package ansiterm
+
+type escapeState struct {
+	baseState
+}
+
+func (escState escapeState) Handle(b byte) (s state, e error) {
+	logger.Infof("escapeState::Handle %#x", b)
+	nextState, err := escState.baseState.Handle(b)
+	if nextState != nil || err != nil {
+		return nextState, err
+	}
+
+	switch {
+	case b == ANSI_ESCAPE_SECONDARY:
+		return escState.parser.csiEntry, nil
+	case b == ANSI_OSC_STRING_ENTRY:
+		return escState.parser.oscString, nil
+	case sliceContains(executors, b):
+		return escState, escState.parser.execute()
+	case sliceContains(escapeToGroundBytes, b):
+		return escState.parser.ground, nil
+	case sliceContains(intermeds, b):
+		return escState.parser.escapeIntermediate, nil
+	}
+
+	return escState, nil
+}
+
+func (escState escapeState) Transition(s state) error {
+	logger.Infof("Escape::Transition %s --> %s", escState.Name(), s.Name())
+	escState.baseState.Transition(s)
+
+	switch s {
+	case escState.parser.ground:
+		return escState.parser.escDispatch()
+	case escState.parser.escapeIntermediate:
+		return escState.parser.collectInter()
+	}
+
+	return nil
+}
+
+func (escState escapeState) Enter() error {
+	escState.parser.clear()
+	return nil
+}

vendor/github.com/Azure/go-ansiterm/event_handler.go

+package ansiterm
+
+type AnsiEventHandler interface {
+	// Print
+	Print(b byte) error
+
+	// Execute C0 commands
+	Execute(b byte) error
+
+	// CUrsor Up
+	CUU(int) error
+
+	// CUrsor Down
+	CUD(int) error
+
+	// CUrsor Forward
+	CUF(int) error
+
+	// CUrsor Backward
+	CUB(int) error
+
+	// Cursor to Next Line
+	CNL(int) error
+
+	// Cursor to Previous Line
+	CPL(int) error
+
+	// Cursor Horizontal position Absolute
+	CHA(int) error
+
+	// Vertical line Position Absolute
+	VPA(int) error
+
+	// CUrsor Position
+	CUP(int, int) error
+
+	// Horizontal and Vertical Position (depends on PUM)
+	HVP(int, int) error
+
+	// Text Cursor Enable Mode
+	DECTCEM(bool) error
+
+	// Origin Mode
+	DECOM(bool) error
+
+	// 132 Column Mode
+	DECCOLM(bool) error
+
+	// Erase in Display
+	ED(int) error
+
+	// Erase in Line
+	EL(int) error
+
+	// Insert Line
+	IL(int) error
+
+	// Delete Line
+	DL(int) error
+
+	// Insert Character
+	ICH(int) error
+
+	// Delete Character
+	DCH(int) error
+
+	// Set Graphics Rendition
+	SGR([]int) error
+
+	// Pan Down
+	SU(int) error
+
+	// Pan Up
+	SD(int) error
+
+	// Device Attributes
+	DA([]string) error
+
+	// Set Top and Bottom Margins
+	DECSTBM(int, int) error
+
+	// Index
+	IND() error
+
+	// Reverse Index
+	RI() error
+
+	// Flush updates from previous commands
+	Flush() error
+}

vendor/github.com/Azure/go-ansiterm/ground_state.go

+package ansiterm
+
+type groundState struct {
+	baseState
+}
+
+func (gs groundState) Handle(b byte) (s state, e error) {
+	gs.parser.context.currentChar = b
+
+	nextState, err := gs.baseState.Handle(b)
+	if nextState != nil || err != nil {
+		return nextState, err
+	}
+
+	switch {
+	case sliceContains(printables, b):
+		return gs, gs.parser.print()
+
+	case sliceContains(executors, b):
+		return gs, gs.parser.execute()
+	}
+
+	return gs, nil
+}

vendor/github.com/Azure/go-ansiterm/osc_string_state.go

+package ansiterm
+
+type oscStringState struct {
+	baseState
+}
+
+func (oscState oscStringState) Handle(b byte) (s state, e error) {
+	logger.Infof("OscString::Handle %#x", b)
+	nextState, err := oscState.baseState.Handle(b)
+	if nextState != nil || err != nil {
+		return nextState, err
+	}
+
+	switch {
+	case isOscStringTerminator(b):
+		return oscState.parser.ground, nil
+	}
+
+	return oscState, nil
+}
+
+// See below for OSC string terminators for linux
+// http://man7.org/linux/man-pages/man4/console_codes.4.html
+func isOscStringTerminator(b byte) bool {
+
+	if b == ANSI_BEL || b == 0x5C {
+		return true
+	}
+
+	return false
+}

vendor/github.com/Azure/go-ansiterm/parser.go

+package ansiterm
+
+import (
+	"errors"
+	"io/ioutil"
+	"os"
+
+	"github.com/Sirupsen/logrus"
+)
+
+var logger *logrus.Logger
+
+type AnsiParser struct {
+	currState          state
+	eventHandler       AnsiEventHandler
+	context            *ansiContext
+	csiEntry           state
+	csiParam           state
+	dcsEntry           state
+	escape             state
+	escapeIntermediate state
+	error              state
+	ground             state
+	oscString          state
+	stateMap           []state
+}
+
+func CreateParser(initialState string, evtHandler AnsiEventHandler) *AnsiParser {
+	logFile := ioutil.Discard
+
+	if isDebugEnv := os.Getenv(LogEnv); isDebugEnv == "1" {
+		logFile, _ = os.Create("ansiParser.log")
+	}
+
+	logger = &logrus.Logger{
+		Out:       logFile,
+		Formatter: new(logrus.TextFormatter),
+		Level:     logrus.InfoLevel,
+	}
+
+	parser := &AnsiParser{
+		eventHandler: evtHandler,
+		context:      &ansiContext{},
+	}
+
+	parser.csiEntry = csiEntryState{baseState{name: "CsiEntry", parser: parser}}
+	parser.csiParam = csiParamState{baseState{name: "CsiParam", parser: parser}}
+	parser.dcsEntry = dcsEntryState{baseState{name: "DcsEntry", parser: parser}}
+	parser.escape = escapeState{baseState{name: "Escape", parser: parser}}
+	parser.escapeIntermediate = escapeIntermediateState{baseState{name: "EscapeIntermediate", parser: parser}}
+	parser.error = errorState{baseState{name: "Error", parser: parser}}
+	parser.ground = groundState{baseState{name: "Ground", parser: parser}}
+	parser.oscString = oscStringState{baseState{name: "OscString", parser: parser}}
+
+	parser.stateMap = []state{
+		parser.csiEntry,
+		parser.csiParam,
+		parser.dcsEntry,
+		parser.escape,
+		parser.escapeIntermediate,
+		parser.error,
+		parser.ground,
+		parser.oscString,
+	}
+
+	parser.currState = getState(initialState, parser.stateMap)
+
+	logger.Infof("CreateParser: parser %p", parser)
+	return parser
+}
+
+func getState(name string, states []state) state {
+	for _, el := range states {
+		if el.Name() == name {
+			return el
+		}
+	}
+
+	return nil
+}
+
+func (ap *AnsiParser) Parse(bytes []byte) (int, error) {
+	for i, b := range bytes {
+		if err := ap.handle(b); err != nil {
+			return i, err
+		}
+	}
+
+	return len(bytes), ap.eventHandler.Flush()
+}
+
+func (ap *AnsiParser) handle(b byte) error {
+	ap.context.currentChar = b
+	newState, err := ap.currState.Handle(b)
+	if err != nil {
+		return err
+	}
+
+	if newState == nil {
+		logger.Warning("newState is nil")
+		return errors.New("New state of 'nil' is invalid.")
+	}
+
+	if newState != ap.currState {
+		if err := ap.changeState(newState); err != nil {
+			return err
+		}
+	}
+
+	return nil
+}
+
+func (ap *AnsiParser) changeState(newState state) error {
+	logger.Infof("ChangeState %s --> %s", ap.currState.Name(), newState.Name())
+
+	// Exit old state
+	if err := ap.currState.Exit(); err != nil {
+		logger.Infof("Exit state '%s' failed with : '%v'", ap.currState.Name(), err)
+		return err
+	}
+
+	// Perform transition action
+	if err := ap.currState.Transition(newState); err != nil {
+		logger.Infof("Transition from '%s' to '%s' failed with: '%v'", ap.currState.Name(), newState.Name, err)
+		return err
+	}
+
+	// Enter new state
+	if err := newState.Enter(); err != nil {
+		logger.Infof("Enter state '%s' failed with: '%v'", newState.Name(), err)
+		return err
+	}
+
+	ap.currState = newState
+	return nil
+}

vendor/github.com/Azure/go-ansiterm/parser_action_helpers.go

+package ansiterm
+
+import (
+	"strconv"
+)
+
+func parseParams(bytes []byte) ([]string, error) {
+	paramBuff := make([]byte, 0, 0)
+	params := []string{}
+
+	for _, v := range bytes {
+		if v == ';' {
+			if len(paramBuff) > 0 {
+				// Completed parameter, append it to the list
+				s := string(paramBuff)
+				params = append(params, s)
+				paramBuff = make([]byte, 0, 0)
+			}
+		} else {
+			paramBuff = append(paramBuff, v)
+		}
+	}
+
+	// Last parameter may not be terminated with ';'
+	if len(paramBuff) > 0 {
+		s := string(paramBuff)
+		params = append(params, s)
+	}
+
+	logger.Infof("Parsed params: %v with length: %d", params, len(params))
+	return params, nil
+}
+
+func parseCmd(context ansiContext) (string, error) {
+	return string(context.currentChar), nil
+}
+
+func getInt(params []string, dflt int) int {
+	i := getInts(params, 1, dflt)[0]
+	logger.Infof("getInt: %v", i)
+	return i
+}
+
+func getInts(params []string, minCount int, dflt int) []int {
+	ints := []int{}
+
+	for _, v := range params {
+		i, _ := strconv.Atoi(v)
+		// Zero is mapped to the default value in VT100.
+		if i == 0 {
+			i = dflt
+		}
+		ints = append(ints, i)
+	}
+
+	if len(ints) < minCount {
+		remaining := minCount - len(ints)
+		for i := 0; i < remaining; i++ {
+			ints = append(ints, dflt)
+		}
+	}
+
+	logger.Infof("getInts: %v", ints)
+
+	return ints
+}
+
+func (ap *AnsiParser) modeDispatch(param string, set bool) error {
+	switch param {
+	case "?3":
+		return ap.eventHandler.DECCOLM(set)
+	case "?6":
+		return ap.eventHandler.DECOM(set)
+	case "?25":
+		return ap.eventHandler.DECTCEM(set)
+	}
+	return nil
+}
+
+func (ap *AnsiParser) hDispatch(params []string) error {
+	if len(params) == 1 {
+		return ap.modeDispatch(params[0], true)
+	}
+
+	return nil
+}
+
+func (ap *AnsiParser) lDispatch(params []string) error {
+	if len(params) == 1 {
+		return ap.modeDispatch(params[0], false)
+	}
+
+	return nil
+}
+
+func getEraseParam(params []string) int {
+	param := getInt(params, 0)
+	if param < 0 || 3 < param {
+		param = 0
+	}
+
+	return param
+}

vendor/github.com/Azure/go-ansiterm/parser_actions.go

+package ansiterm
+
+import (
+	"fmt"
+)
+
+func (ap *AnsiParser) collectParam() error {
+	currChar := ap.context.currentChar
+	logger.Infof("collectParam %#x", currChar)
+	ap.context.paramBuffer = append(ap.context.paramBuffer, currChar)
+	return nil
+}
+
+func (ap *AnsiParser) collectInter() error {
+	currChar := ap.context.currentChar
+	logger.Infof("collectInter %#x", currChar)
+	ap.context.paramBuffer = append(ap.context.interBuffer, currChar)
+	return nil
+}
+
+func (ap *AnsiParser) escDispatch() error {
+	cmd, _ := parseCmd(*ap.context)
+	intermeds := ap.context.interBuffer
+	logger.Infof("escDispatch currentChar: %#x", ap.context.currentChar)
+	logger.Infof("escDispatch: %v(%v)", cmd, intermeds)
+
+	switch cmd {
+	case "D": // IND
+		return ap.eventHandler.IND()
+	case "E": // NEL, equivalent to CRLF
+		err := ap.eventHandler.Execute(ANSI_CARRIAGE_RETURN)
+		if err == nil {
+			err = ap.eventHandler.Execute(ANSI_LINE_FEED)
+		}
+		return err
+	case "M": // RI
+		return ap.eventHandler.RI()
+	}
+
+	return nil
+}
+
+func (ap *AnsiParser) csiDispatch() error {
+	cmd, _ := parseCmd(*ap.context)
+	params, _ := parseParams(ap.context.paramBuffer)
+
+	logger.Infof("csiDispatch: %v(%v)", cmd, params)
+
+	switch cmd {
+	case "@":
+		return ap.eventHandler.ICH(getInt(params, 1))
+	case "A":
+		return ap.eventHandler.CUU(getInt(params, 1))
+	case "B":
+		return ap.eventHandler.CUD(getInt(params, 1))
+	case "C":
+		return ap.eventHandler.CUF(getInt(params, 1))
+	case "D":
+		return ap.eventHandler.CUB(getInt(params, 1))
+	case "E":
+		return ap.eventHandler.CNL(getInt(params, 1))
+	case "F":
+		return ap.eventHandler.CPL(getInt(params, 1))
+	case "G":
+		return ap.eventHandler.CHA(getInt(params, 1))
+	case "H":
+		ints := getInts(params, 2, 1)
+		x, y := ints[0], ints[1]
+		return ap.eventHandler.CUP(x, y)
+	case "J":
+		param := getEraseParam(params)
+		return ap.eventHandler.ED(param)
+	case "K":
+		param := getEraseParam(params)
+		return ap.eventHandler.EL(param)
+	case "L":
+		return ap.eventHandler.IL(getInt(params, 1))
+	case "M":
+		return ap.eventHandler.DL(getInt(params, 1))
+	case "P":
+		return ap.eventHandler.DCH(getInt(params, 1))
+	case "S":
+		return ap.eventHandler.SU(getInt(params, 1))
+	case "T":
+		return ap.eventHandler.SD(getInt(params, 1))
+	case "c":
+		return ap.eventHandler.DA(params)
+	case "d":
+		return ap.eventHandler.VPA(getInt(params, 1))
+	case "f":
+		ints := getInts(params, 2, 1)
+		x, y := ints[0], ints[1]
+		return ap.eventHandler.HVP(x, y)
+	case "h":
+		return ap.hDispatch(params)
+	case "l":
+		return ap.lDispatch(params)
+	case "m":
+		return ap.eventHandler.SGR(getInts(params, 1, 0))
+	case "r":
+		ints := getInts(params, 2, 1)
+		top, bottom := ints[0], ints[1]
+		return ap.eventHandler.DECSTBM(top, bottom)
+	default:
+		logger.Errorf(fmt.Sprintf("Unsupported CSI command: '%s', with full context:  %v", cmd, ap.context))
+		return nil
+	}
+
+}
+
+func (ap *AnsiParser) print() error {
+	return ap.eventHandler.Print(ap.context.currentChar)
+}
+
+func (ap *AnsiParser) clear() error {
+	ap.context = &ansiContext{}
+	return nil
+}
+
+func (ap *AnsiParser) execute() error {
+	return ap.eventHandler.Execute(ap.context.currentChar)
+}

vendor/github.com/Azure/go-ansiterm/states.go

+package ansiterm
+
+type stateID int
+
+type state interface {
+	Enter() error
+	Exit() error
+	Handle(byte) (state, error)
+	Name() string
+	Transition(state) error
+}
+
+type baseState struct {
+	name   string
+	parser *AnsiParser
+}
+
+func (base baseState) Enter() error {
+	return nil
+}
+
+func (base baseState) Exit() error {
+	return nil
+}
+
+func (base baseState) Handle(b byte) (s state, e error) {
+
+	switch {
+	case b == CSI_ENTRY:
+		return base.parser.csiEntry, nil
+	case b == DCS_ENTRY:
+		return base.parser.dcsEntry, nil
+	case b == ANSI_ESCAPE_PRIMARY:
+		return base.parser.escape, nil
+	case b == OSC_STRING:
+		return base.parser.oscString, nil
+	case sliceContains(toGroundBytes, b):
+		return base.parser.ground, nil
+	}
+
+	return nil, nil
+}
+
+func (base baseState) Name() string {
+	return base.name
+}
+
+func (base baseState) Transition(s state) error {
+	if s == base.parser.ground {
+		execBytes := []byte{0x18}
+		execBytes = append(execBytes, 0x1A)
+		execBytes = append(execBytes, getByteRange(0x80, 0x8F)...)
+		execBytes = append(execBytes, getByteRange(0x91, 0x97)...)
+		execBytes = append(execBytes, 0x99)
+		execBytes = append(execBytes, 0x9A)
+
+		if sliceContains(execBytes, base.parser.context.currentChar) {
+			return base.parser.execute()
+		}
+	}
+
+	return nil
+}
+
+type dcsEntryState struct {
+	baseState
+}
+
+type errorState struct {
+	baseState
+}

vendor/github.com/Azure/go-ansiterm/utilities.go

+package ansiterm
+
+import (
+	"strconv"
+)
+
+func sliceContains(bytes []byte, b byte) bool {
+	for _, v := range bytes {
+		if v == b {
+			return true
+		}
+	}
+
+	return false
+}
+
+func convertBytesToInteger(bytes []byte) int {
+	s := string(bytes)
+	i, _ := strconv.Atoi(s)
+	return i
+}

vendor/github.com/Azure/go-ansiterm/winterm/ansi.go

+// +build windows
+
+package winterm
+
+import (
+	"fmt"
+	"os"
+	"strconv"
+	"strings"
+	"syscall"
+
+	"github.com/Azure/go-ansiterm"
+)
+
+// Windows keyboard constants
+// See https://msdn.microsoft.com/en-us/library/windows/desktop/dd375731(v=vs.85).aspx.
+const (
+	VK_PRIOR    = 0x21 // PAGE UP key
+	VK_NEXT     = 0x22 // PAGE DOWN key
+	VK_END      = 0x23 // END key
+	VK_HOME     = 0x24 // HOME key
+	VK_LEFT     = 0x25 // LEFT ARROW key
+	VK_UP       = 0x26 // UP ARROW key
+	VK_RIGHT    = 0x27 // RIGHT ARROW key
+	VK_DOWN     = 0x28 // DOWN ARROW key
+	VK_SELECT   = 0x29 // SELECT key
+	VK_PRINT    = 0x2A // PRINT key
+	VK_EXECUTE  = 0x2B // EXECUTE key
+	VK_SNAPSHOT = 0x2C // PRINT SCREEN key
+	VK_INSERT   = 0x2D // INS key
+	VK_DELETE   = 0x2E // DEL key
+	VK_HELP     = 0x2F // HELP key
+	VK_F1       = 0x70 // F1 key
+	VK_F2       = 0x71 // F2 key
+	VK_F3       = 0x72 // F3 key
+	VK_F4       = 0x73 // F4 key
+	VK_F5       = 0x74 // F5 key
+	VK_F6       = 0x75 // F6 key
+	VK_F7       = 0x76 // F7 key
+	VK_F8       = 0x77 // F8 key
+	VK_F9       = 0x78 // F9 key
+	VK_F10      = 0x79 // F10 key
+	VK_F11      = 0x7A // F11 key
+	VK_F12      = 0x7B // F12 key
+
+	RIGHT_ALT_PRESSED  = 0x0001
+	LEFT_ALT_PRESSED   = 0x0002
+	RIGHT_CTRL_PRESSED = 0x0004
+	LEFT_CTRL_PRESSED  = 0x0008
+	SHIFT_PRESSED      = 0x0010
+	NUMLOCK_ON         = 0x0020
+	SCROLLLOCK_ON      = 0x0040
+	CAPSLOCK_ON        = 0x0080
+	ENHANCED_KEY       = 0x0100
+)
+
+type ansiCommand struct {
+	CommandBytes []byte
+	Command      string
+	Parameters   []string
+	IsSpecial    bool
+}
+
+func newAnsiCommand(command []byte) *ansiCommand {
+
+	if isCharacterSelectionCmdChar(command[1]) {
+		// Is Character Set Selection commands
+		return &ansiCommand{
+			CommandBytes: command,
+			Command:      string(command),
+			IsSpecial:    true,
+		}
+	}
+
+	// last char is command character
+	lastCharIndex := len(command) - 1
+
+	ac := &ansiCommand{
+		CommandBytes: command,
+		Command:      string(command[lastCharIndex]),
+		IsSpecial:    false,
+	}
+
+	// more than a single escape
+	if lastCharIndex != 0 {
+		start := 1
+		// skip if double char escape sequence
+		if command[0] == ansiterm.ANSI_ESCAPE_PRIMARY && command[1] == ansiterm.ANSI_ESCAPE_SECONDARY {
+			start++
+		}
+		// convert this to GetNextParam method
+		ac.Parameters = strings.Split(string(command[start:lastCharIndex]), ansiterm.ANSI_PARAMETER_SEP)
+	}
+
+	return ac
+}
+
+func (ac *ansiCommand) paramAsSHORT(index int, defaultValue int16) int16 {
+	if index < 0 || index >= len(ac.Parameters) {
+		return defaultValue
+	}
+
+	param, err := strconv.ParseInt(ac.Parameters[index], 10, 16)
+	if err != nil {
+		return defaultValue
+	}
+
+	return int16(param)
+}
+
+func (ac *ansiCommand) String() string {
+	return fmt.Sprintf("0x%v \"%v\" (\"%v\")",
+		bytesToHex(ac.CommandBytes),
+		ac.Command,
+		strings.Join(ac.Parameters, "\",\""))
+}
+
+// isAnsiCommandChar returns true if the passed byte falls within the range of ANSI commands.
+// See http://manpages.ubuntu.com/manpages/intrepid/man4/console_codes.4.html.
+func isAnsiCommandChar(b byte) bool {
+	switch {
+	case ansiterm.ANSI_COMMAND_FIRST <= b && b <= ansiterm.ANSI_COMMAND_LAST && b != ansiterm.ANSI_ESCAPE_SECONDARY:
+		return true
+	case b == ansiterm.ANSI_CMD_G1 || b == ansiterm.ANSI_CMD_OSC || b == ansiterm.ANSI_CMD_DECPAM || b == ansiterm.ANSI_CMD_DECPNM:
+		// non-CSI escape sequence terminator
+		return true
+	case b == ansiterm.ANSI_CMD_STR_TERM || b == ansiterm.ANSI_BEL:
+		// String escape sequence terminator
+		return true
+	}
+	return false
+}
+
+func isXtermOscSequence(command []byte, current byte) bool {
+	return (len(command) >= 2 && command[0] == ansiterm.ANSI_ESCAPE_PRIMARY && command[1] == ansiterm.ANSI_CMD_OSC && current != ansiterm.ANSI_BEL)
+}
+
+func isCharacterSelectionCmdChar(b byte) bool {
+	return (b == ansiterm.ANSI_CMD_G0 || b == ansiterm.ANSI_CMD_G1 || b == ansiterm.ANSI_CMD_G2 || b == ansiterm.ANSI_CMD_G3)
+}
+
+// bytesToHex converts a slice of bytes to a human-readable string.
+func bytesToHex(b []byte) string {
+	hex := make([]string, len(b))
+	for i, ch := range b {
+		hex[i] = fmt.Sprintf("%X", ch)
+	}
+	return strings.Join(hex, "")
+}
+
+// ensureInRange adjusts the passed value, if necessary, to ensure it is within
+// the passed min / max range.
+func ensureInRange(n int16, min int16, max int16) int16 {
+	if n < min {
+		return min
+	} else if n > max {
+		return max
+	} else {
+		return n
+	}
+}
+
+func GetStdFile(nFile int) (*os.File, uintptr) {
+	var file *os.File
+	switch nFile {
+	case syscall.STD_INPUT_HANDLE:
+		file = os.Stdin
+	case syscall.STD_OUTPUT_HANDLE:
+		file = os.Stdout
+	case syscall.STD_ERROR_HANDLE:
+		file = os.Stderr
+	default:
+		panic(fmt.Errorf("Invalid standard handle identifier: %v", nFile))
+	}
+
+	fd, err := syscall.GetStdHandle(nFile)
+	if err != nil {
+		panic(fmt.Errorf("Invalid standard handle indentifier: %v -- %v", nFile, err))
+	}
+
+	return file, uintptr(fd)
+}

vendor/github.com/Azure/go-ansiterm/winterm/attr_translation.go

+// +build windows
+
+package winterm
+
+import "github.com/Azure/go-ansiterm"
+
+const (
+	FOREGROUND_COLOR_MASK = FOREGROUND_RED | FOREGROUND_GREEN | FOREGROUND_BLUE
+	BACKGROUND_COLOR_MASK = BACKGROUND_RED | BACKGROUND_GREEN | BACKGROUND_BLUE
+)
+
+// collectAnsiIntoWindowsAttributes modifies the passed Windows text mode flags to reflect the
+// request represented by the passed ANSI mode.
+func collectAnsiIntoWindowsAttributes(windowsMode uint16, inverted bool, baseMode uint16, ansiMode int16) (uint16, bool) {
+	switch ansiMode {
+
+	// Mode styles
+	case ansiterm.ANSI_SGR_BOLD:
+		windowsMode = windowsMode | FOREGROUND_INTENSITY
+
+	case ansiterm.ANSI_SGR_DIM, ansiterm.ANSI_SGR_BOLD_DIM_OFF:
+		windowsMode &^= FOREGROUND_INTENSITY
+
+	case ansiterm.ANSI_SGR_UNDERLINE:
+		windowsMode = windowsMode | COMMON_LVB_UNDERSCORE
+
+	case ansiterm.ANSI_SGR_REVERSE:
+		inverted = true
+
+	case ansiterm.ANSI_SGR_REVERSE_OFF:
+		inverted = false
+
+	case ansiterm.ANSI_SGR_UNDERLINE_OFF:
+		windowsMode &^= COMMON_LVB_UNDERSCORE
+
+		// Foreground colors
+	case ansiterm.ANSI_SGR_FOREGROUND_DEFAULT:
+		windowsMode = (windowsMode &^ FOREGROUND_MASK) | (baseMode & FOREGROUND_MASK)
+
+	case ansiterm.ANSI_SGR_FOREGROUND_BLACK:
+		windowsMode = (windowsMode &^ FOREGROUND_COLOR_MASK)
+
+	case ansiterm.ANSI_SGR_FOREGROUND_RED:
+		windowsMode = (windowsMode &^ FOREGROUND_COLOR_MASK) | FOREGROUND_RED
+
+	case ansiterm.ANSI_SGR_FOREGROUND_GREEN:
+		windowsMode = (windowsMode &^ FOREGROUND_COLOR_MASK) | FOREGROUND_GREEN
+
+	case ansiterm.ANSI_SGR_FOREGROUND_YELLOW:
+		windowsMode = (windowsMode &^ FOREGROUND_COLOR_MASK) | FOREGROUND_RED | FOREGROUND_GREEN
+
+	case ansiterm.ANSI_SGR_FOREGROUND_BLUE:
+		windowsMode = (windowsMode &^ FOREGROUND_COLOR_MASK) | FOREGROUND_BLUE
+
+	case ansiterm.ANSI_SGR_FOREGROUND_MAGENTA:
+		windowsMode = (windowsMode &^ FOREGROUND_COLOR_MASK) | FOREGROUND_RED | FOREGROUND_BLUE
+
+	case ansiterm.ANSI_SGR_FOREGROUND_CYAN:
+		windowsMode = (windowsMode &^ FOREGROUND_COLOR_MASK) | FOREGROUND_GREEN | FOREGROUND_BLUE
+
+	case ansiterm.ANSI_SGR_FOREGROUND_WHITE:
+		windowsMode = (windowsMode &^ FOREGROUND_COLOR_MASK) | FOREGROUND_RED | FOREGROUND_GREEN | FOREGROUND_BLUE
+
+		// Background colors
+	case ansiterm.ANSI_SGR_BACKGROUND_DEFAULT:
+		// Black with no intensity
+		windowsMode = (windowsMode &^ BACKGROUND_MASK) | (baseMode & BACKGROUND_MASK)
+
+	case ansiterm.ANSI_SGR_BACKGROUND_BLACK:
+		windowsMode = (windowsMode &^ BACKGROUND_COLOR_MASK)
+
+	case ansiterm.ANSI_SGR_BACKGROUND_RED:
+		windowsMode = (windowsMode &^ BACKGROUND_COLOR_MASK) | BACKGROUND_RED
+
+	case ansiterm.ANSI_SGR_BACKGROUND_GREEN:
+		windowsMode = (windowsMode &^ BACKGROUND_COLOR_MASK) | BACKGROUND_GREEN
+
+	case ansiterm.ANSI_SGR_BACKGROUND_YELLOW:
+		windowsMode = (windowsMode &^ BACKGROUND_COLOR_MASK) | BACKGROUND_RED | BACKGROUND_GREEN
+
+	case ansiterm.ANSI_SGR_BACKGROUND_BLUE:
+		windowsMode = (windowsMode &^ BACKGROUND_COLOR_MASK) | BACKGROUND_BLUE
+
+	case ansiterm.ANSI_SGR_BACKGROUND_MAGENTA:
+		windowsMode = (windowsMode &^ BACKGROUND_COLOR_MASK) | BACKGROUND_RED | BACKGROUND_BLUE
+
+	case ansiterm.ANSI_SGR_BACKGROUND_CYAN:
+		windowsMode = (windowsMode &^ BACKGROUND_COLOR_MASK) | BACKGROUND_GREEN | BACKGROUND_BLUE
+
+	case ansiterm.ANSI_SGR_BACKGROUND_WHITE:
+		windowsMode = (windowsMode &^ BACKGROUND_COLOR_MASK) | BACKGROUND_RED | BACKGROUND_GREEN | BACKGROUND_BLUE
+	}
+
+	return windowsMode, inverted
+}
+
+// invertAttributes inverts the foreground and background colors of a Windows attributes value
+func invertAttributes(windowsMode uint16) uint16 {
+	return (COMMON_LVB_MASK & windowsMode) | ((FOREGROUND_MASK & windowsMode) << 4) | ((BACKGROUND_MASK & windowsMode) >> 4)
+}

vendor/github.com/Azure/go-ansiterm/winterm/cursor_helpers.go

+// +build windows
+
+package winterm
+
+const (
+	horizontal = iota
+	vertical
+)
+
+func (h *windowsAnsiEventHandler) getCursorWindow(info *CONSOLE_SCREEN_BUFFER_INFO) SMALL_RECT {
+	if h.originMode {
+		sr := h.effectiveSr(info.Window)
+		return SMALL_RECT{
+			Top:    sr.top,
+			Bottom: sr.bottom,
+			Left:   0,
+			Right:  info.Size.X - 1,
+		}
+	} else {
+		return SMALL_RECT{
+			Top:    info.Window.Top,
+			Bottom: info.Window.Bottom,
+			Left:   0,
+			Right:  info.Size.X - 1,
+		}
+	}
+}
+
+// setCursorPosition sets the cursor to the specified position, bounded to the screen size
+func (h *windowsAnsiEventHandler) setCursorPosition(position COORD, window SMALL_RECT) error {
+	position.X = ensureInRange(position.X, window.Left, window.Right)
+	position.Y = ensureInRange(position.Y, window.Top, window.Bottom)
+	err := SetConsoleCursorPosition(h.fd, position)
+	if err != nil {
+		return err
+	}
+	logger.Infof("Cursor position set: (%d, %d)", position.X, position.Y)
+	return err
+}
+
+func (h *windowsAnsiEventHandler) moveCursorVertical(param int) error {
+	return h.moveCursor(vertical, param)
+}
+
+func (h *windowsAnsiEventHandler) moveCursorHorizontal(param int) error {
+	return h.moveCursor(horizontal, param)
+}
+
+func (h *windowsAnsiEventHandler) moveCursor(moveMode int, param int) error {
+	info, err := GetConsoleScreenBufferInfo(h.fd)
+	if err != nil {
+		return err
+	}
+
+	position := info.CursorPosition
+	switch moveMode {
+	case horizontal:
+		position.X += int16(param)
+	case vertical:
+		position.Y += int16(param)
+	}
+
+	if err = h.setCursorPosition(position, h.getCursorWindow(info)); err != nil {
+		return err
+	}
+
+	return nil
+}
+
+func (h *windowsAnsiEventHandler) moveCursorLine(param int) error {
+	info, err := GetConsoleScreenBufferInfo(h.fd)
+	if err != nil {
+		return err
+	}
+
+	position := info.CursorPosition
+	position.X = 0
+	position.Y += int16(param)
+
+	if err = h.setCursorPosition(position, h.getCursorWindow(info)); err != nil {
+		return err
+	}
+
+	return nil
+}
+
+func (h *windowsAnsiEventHandler) moveCursorColumn(param int) error {
+	info, err := GetConsoleScreenBufferInfo(h.fd)
+	if err != nil {
+		return err
+	}
+
+	position := info.CursorPosition
+	position.X = int16(param) - 1
+
+	if err = h.setCursorPosition(position, h.getCursorWindow(info)); err != nil {
+		return err
+	}
+
+	return nil
+}

vendor/github.com/Azure/go-ansiterm/winterm/erase_helpers.go

+// +build windows
+
+package winterm
+
+import "github.com/Azure/go-ansiterm"
+
+func (h *windowsAnsiEventHandler) clearRange(attributes uint16, fromCoord COORD, toCoord COORD) error {
+	// Ignore an invalid (negative area) request
+	if toCoord.Y < fromCoord.Y {
+		return nil
+	}
+
+	var err error
+
+	var coordStart = COORD{}
+	var coordEnd = COORD{}
+
+	xCurrent, yCurrent := fromCoord.X, fromCoord.Y
+	xEnd, yEnd := toCoord.X, toCoord.Y
+
+	// Clear any partial initial line
+	if xCurrent > 0 {
+		coordStart.X, coordStart.Y = xCurrent, yCurrent
+		coordEnd.X, coordEnd.Y = xEnd, yCurrent
+
+		err = h.clearRect(attributes, coordStart, coordEnd)
+		if err != nil {
+			return err
+		}
+
+		xCurrent = 0
+		yCurrent += 1
+	}
+
+	// Clear intervening rectangular section
+	if yCurrent < yEnd {
+		coordStart.X, coordStart.Y = xCurrent, yCurrent
+		coordEnd.X, coordEnd.Y = xEnd, yEnd-1
+
+		err = h.clearRect(attributes, coordStart, coordEnd)
+		if err != nil {
+			return err
+		}
+
+		xCurrent = 0
+		yCurrent = yEnd
+	}
+
+	// Clear remaining partial ending line
+	coordStart.X, coordStart.Y = xCurrent, yCurrent
+	coordEnd.X, coordEnd.Y = xEnd, yEnd
+
+	err = h.clearRect(attributes, coordStart, coordEnd)
+	if err != nil {
+		return err
+	}
+
+	return nil
+}
+
+func (h *windowsAnsiEventHandler) clearRect(attributes uint16, fromCoord COORD, toCoord COORD) error {
+	region := SMALL_RECT{Top: fromCoord.Y, Left: fromCoord.X, Bottom: toCoord.Y, Right: toCoord.X}
+	width := toCoord.X - fromCoord.X + 1
+	height := toCoord.Y - fromCoord.Y + 1
+	size := uint32(width) * uint32(height)
+
+	if size <= 0 {
+		return nil
+	}
+
+	buffer := make([]CHAR_INFO, size)
+
+	char := CHAR_INFO{ansiterm.FILL_CHARACTER, attributes}
+	for i := 0; i < int(size); i++ {
+		buffer[i] = char
+	}
+
+	err := WriteConsoleOutput(h.fd, buffer, COORD{X: width, Y: height}, COORD{X: 0, Y: 0}, &region)
+	if err != nil {
+		return err
+	}
+
+	return nil
+}

vendor/github.com/Azure/go-ansiterm/winterm/scroll_helper.go

+// +build windows
+
+package winterm
+
+// effectiveSr gets the current effective scroll region in buffer coordinates
+func (h *windowsAnsiEventHandler) effectiveSr(window SMALL_RECT) scrollRegion {
+	top := addInRange(window.Top, h.sr.top, window.Top, window.Bottom)
+	bottom := addInRange(window.Top, h.sr.bottom, window.Top, window.Bottom)
+	if top >= bottom {
+		top = window.Top
+		bottom = window.Bottom
+	}
+	return scrollRegion{top: top, bottom: bottom}
+}
+
+func (h *windowsAnsiEventHandler) scrollUp(param int) error {
+	info, err := GetConsoleScreenBufferInfo(h.fd)
+	if err != nil {
+		return err
+	}
+
+	sr := h.effectiveSr(info.Window)
+	return h.scroll(param, sr, info)
+}
+
+func (h *windowsAnsiEventHandler) scrollDown(param int) error {
+	return h.scrollUp(-param)
+}
+
+func (h *windowsAnsiEventHandler) deleteLines(param int) error {
+	info, err := GetConsoleScreenBufferInfo(h.fd)
+	if err != nil {
+		return err
+	}
+
+	start := info.CursorPosition.Y
+	sr := h.effectiveSr(info.Window)
+	// Lines cannot be inserted or deleted outside the scrolling region.
+	if start >= sr.top && start <= sr.bottom {
+		sr.top = start
+		return h.scroll(param, sr, info)
+	} else {
+		return nil
+	}
+}
+
+func (h *windowsAnsiEventHandler) insertLines(param int) error {
+	return h.deleteLines(-param)
+}
+
+// scroll scrolls the provided scroll region by param lines. The scroll region is in buffer coordinates.
+func (h *windowsAnsiEventHandler) scroll(param int, sr scrollRegion, info *CONSOLE_SCREEN_BUFFER_INFO) error {
+	logger.Infof("scroll: scrollTop: %d, scrollBottom: %d", sr.top, sr.bottom)
+	logger.Infof("scroll: windowTop: %d, windowBottom: %d", info.Window.Top, info.Window.Bottom)
+
+	// Copy from and clip to the scroll region (full buffer width)
+	scrollRect := SMALL_RECT{
+		Top:    sr.top,
+		Bottom: sr.bottom,
+		Left:   0,
+		Right:  info.Size.X - 1,
+	}
+
+	// Origin to which area should be copied
+	destOrigin := COORD{
+		X: 0,
+		Y: sr.top - int16(param),
+	}
+
+	char := CHAR_INFO{
+		UnicodeChar: ' ',
+		Attributes:  h.attributes,
+	}
+
+	if err := ScrollConsoleScreenBuffer(h.fd, scrollRect, scrollRect, destOrigin, char); err != nil {
+		return err
+	}
+	return nil
+}
+
+func (h *windowsAnsiEventHandler) deleteCharacters(param int) error {
+	info, err := GetConsoleScreenBufferInfo(h.fd)
+	if err != nil {
+		return err
+	}
+	return h.scrollLine(param, info.CursorPosition, info)
+}
+
+func (h *windowsAnsiEventHandler) insertCharacters(param int) error {
+	return h.deleteCharacters(-param)
+}
+
+// scrollLine scrolls a line horizontally starting at the provided position by a number of columns.
+func (h *windowsAnsiEventHandler) scrollLine(columns int, position COORD, info *CONSOLE_SCREEN_BUFFER_INFO) error {
+	// Copy from and clip to the scroll region (full buffer width)
+	scrollRect := SMALL_RECT{
+		Top:    position.Y,
+		Bottom: position.Y,
+		Left:   position.X,
+		Right:  info.Size.X - 1,
+	}
+
+	// Origin to which area should be copied
+	destOrigin := COORD{
+		X: position.X - int16(columns),
+		Y: position.Y,
+	}
+
+	char := CHAR_INFO{
+		UnicodeChar: ' ',
+		Attributes:  h.attributes,
+	}
+
+	if err := ScrollConsoleScreenBuffer(h.fd, scrollRect, scrollRect, destOrigin, char); err != nil {
+		return err
+	}
+	return nil
+}

vendor/github.com/Azure/go-ansiterm/winterm/utilities.go

+// +build windows
+
+package winterm
+
+// AddInRange increments a value by the passed quantity while ensuring the values
+// always remain within the supplied min / max range.
+func addInRange(n int16, increment int16, min int16, max int16) int16 {
+	return ensureInRange(n+increment, min, max)
+}

vendor/github.com/docker/docker/LICENSE

@@ -176,7 +176,7 @@
 
    END OF TERMS AND CONDITIONS
 
-   Copyright 2013-2015 Docker, Inc.
+   Copyright 2013-2016 Docker, Inc.
 
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.

vendor/github.com/docker/docker/NOTICE

 Docker
-Copyright 2012-2015 Docker, Inc.
+Copyright 2012-2016 Docker, Inc.
 
 This product includes software developed at Docker, Inc. (https://www.docker.com).
 

vendor/github.com/docker/docker/pkg/jsonlog/jsonlog.go

+package jsonlog
+
+import (
+	"encoding/json"
+	"fmt"
+	"time"
+)
+
+// JSONLog represents a log message, typically a single entry from a given log stream.
+// JSONLogs can be easily serialized to and from JSON and support custom formatting.
+type JSONLog struct {
+	// Log is the log message
+	Log string `json:"log,omitempty"`
+	// Stream is the log source
+	Stream string `json:"stream,omitempty"`
+	// Created is the created timestamp of log
+	Created time.Time `json:"time"`
+}
+
+// Format returns the log formatted according to format
+// If format is nil, returns the log message
+// If format is json, returns the log marshaled in json format
+// By default, returns the log with the log time formatted according to format.
+func (jl *JSONLog) Format(format string) (string, error) {
+	if format == "" {
+		return jl.Log, nil
+	}
+	if format == "json" {
+		m, err := json.Marshal(jl)
+		return string(m), err
+	}
+	return fmt.Sprintf("%s %s", jl.Created.Format(format), jl.Log), nil
+}
+
+// Reset resets the log to nil.
+func (jl *JSONLog) Reset() {
+	jl.Log = ""
+	jl.Stream = ""
+	jl.Created = time.Time{}
+}

vendor/github.com/docker/docker/pkg/jsonlog/jsonlog_marshalling.go

+// This code was initially generated by ffjson <https://github.com/pquerna/ffjson>
+// This code was generated via the following steps:
+// $ go get -u github.com/pquerna/ffjson
+// $ make BIND_DIR=. shell
+// $ ffjson pkg/jsonlog/jsonlog.go
+// $ mv pkg/jsonglog/jsonlog_ffjson.go pkg/jsonlog/jsonlog_marshalling.go
+//
+// It has been modified to improve the performance of time marshalling to JSON
+// and to clean it up.
+// Should this code need to be regenerated when the JSONLog struct is changed,
+// the relevant changes which have been made are:
+// import (
+//        "bytes"
+//-
+//        "unicode/utf8"
+// )
+//
+// func (mj *JSONLog) MarshalJSON() ([]byte, error) {
+//@@ -20,13 +16,13 @@ func (mj *JSONLog) MarshalJSON() ([]byte, error) {
+//        }
+//        return buf.Bytes(), nil
+// }
+//+
+// func (mj *JSONLog) MarshalJSONBuf(buf *bytes.Buffer) error {
+//-       var err error
+//-       var obj []byte
+//-       var first bool = true
+//-       _ = obj
+//-       _ = err
+//-       _ = first
+//+       var (
+//+               err       error
+//+               timestamp string
+//+               first     bool = true
+//+       )
+//        buf.WriteString(`{`)
+//        if len(mj.Log) != 0 {
+//                if first == true {
+//@@ -52,11 +48,11 @@ func (mj *JSONLog) MarshalJSONBuf(buf *bytes.Buffer) error {
+//                buf.WriteString(`,`)
+//        }
+//        buf.WriteString(`"time":`)
+//-       obj, err = mj.Created.MarshalJSON()
+//+       timestamp, err = FastTimeMarshalJSON(mj.Created)
+//        if err != nil {
+//                return err
+//        }
+//-       buf.Write(obj)
+//+       buf.WriteString(timestamp)
+//        buf.WriteString(`}`)
+//        return nil
+// }
+// @@ -81,9 +81,10 @@ func (mj *JSONLog) MarshalJSONBuf(buf *bytes.Buffer) error {
+//         if len(mj.Log) != 0 {
+// -                if first == true {
+// -                       first = false
+// -               } else {
+// -                       buf.WriteString(`,`)
+// -               }
+// +               first = false
+//                 buf.WriteString(`"log":`)
+//                 ffjsonWriteJSONString(buf, mj.Log)
+//         }
+
+package jsonlog
+
+import (
+	"bytes"
+	"unicode/utf8"
+)
+
+// MarshalJSON marshals the JSONLog.
+func (mj *JSONLog) MarshalJSON() ([]byte, error) {
+	var buf bytes.Buffer
+	buf.Grow(1024)
+	if err := mj.MarshalJSONBuf(&buf); err != nil {
+		return nil, err
+	}
+	return buf.Bytes(), nil
+}
+
+// MarshalJSONBuf marshals the JSONLog and stores the result to a bytes.Buffer.
+func (mj *JSONLog) MarshalJSONBuf(buf *bytes.Buffer) error {
+	var (
+		err       error
+		timestamp string
+		first     = true
+	)
+	buf.WriteString(`{`)
+	if len(mj.Log) != 0 {
+		first = false
+		buf.WriteString(`"log":`)
+		ffjsonWriteJSONString(buf, mj.Log)
+	}
+	if len(mj.Stream) != 0 {
+		if first {
+			first = false
+		} else {
+			buf.WriteString(`,`)
+		}
+		buf.WriteString(`"stream":`)
+		ffjsonWriteJSONString(buf, mj.Stream)
+	}
+	if !first {
+		buf.WriteString(`,`)
+	}
+	buf.WriteString(`"time":`)
+	timestamp, err = FastTimeMarshalJSON(mj.Created)
+	if err != nil {
+		return err
+	}
+	buf.WriteString(timestamp)
+	buf.WriteString(`}`)
+	return nil
+}
+
+func ffjsonWriteJSONString(buf *bytes.Buffer, s string) {
+	const hex = "0123456789abcdef"
+
+	buf.WriteByte('"')
+	start := 0
+	for i := 0; i < len(s); {
+		if b := s[i]; b < utf8.RuneSelf {
+			if 0x20 <= b && b != '\\' && b != '"' && b != '<' && b != '>' && b != '&' {
+				i++
+				continue
+			}
+			if start < i {
+				buf.WriteString(s[start:i])
+			}
+			switch b {
+			case '\\', '"':
+				buf.WriteByte('\\')
+				buf.WriteByte(b)
+			case '\n':
+				buf.WriteByte('\\')
+				buf.WriteByte('n')
+			case '\r':
+				buf.WriteByte('\\')
+				buf.WriteByte('r')
+			default:
+
+				buf.WriteString(`\u00`)
+				buf.WriteByte(hex[b>>4])
+				buf.WriteByte(hex[b&0xF])
+			}
+			i++
+			start = i
+			continue
+		}
+		c, size := utf8.DecodeRuneInString(s[i:])
+		if c == utf8.RuneError && size == 1 {
+			if start < i {
+				buf.WriteString(s[start:i])
+			}
+			buf.WriteString(`\ufffd`)
+			i += size
+			start = i
+			continue
+		}
+
+		if c == '\u2028' || c == '\u2029' {
+			if start < i {
+				buf.WriteString(s[start:i])
+			}
+			buf.WriteString(`\u202`)
+			buf.WriteByte(hex[c&0xF])
+			i += size
+			start = i
+			continue
+		}
+		i += size
+	}
+	if start < len(s) {
+		buf.WriteString(s[start:])
+	}
+	buf.WriteByte('"')
+}

vendor/github.com/docker/docker/pkg/jsonlog/jsonlogbytes.go

+package jsonlog
+
+import (
+	"bytes"
+	"encoding/json"
+	"unicode/utf8"
+)
+
+// JSONLogs is based on JSONLog.
+// It allows marshalling JSONLog from Log as []byte
+// and an already marshalled Created timestamp.
+type JSONLogs struct {
+	Log     []byte `json:"log,omitempty"`
+	Stream  string `json:"stream,omitempty"`
+	Created string `json:"time"`
+
+	// json-encoded bytes
+	RawAttrs json.RawMessage `json:"attrs,omitempty"`
+}
+
+// MarshalJSONBuf is based on the same method from JSONLog
+// It has been modified to take into account the necessary changes.
+func (mj *JSONLogs) MarshalJSONBuf(buf *bytes.Buffer) error {
+	var first = true
+
+	buf.WriteString(`{`)
+	if len(mj.Log) != 0 {
+		first = false
+		buf.WriteString(`"log":`)
+		ffjsonWriteJSONBytesAsString(buf, mj.Log)
+	}
+	if len(mj.Stream) != 0 {
+		if first == true {
+			first = false
+		} else {
+			buf.WriteString(`,`)
+		}
+		buf.WriteString(`"stream":`)
+		ffjsonWriteJSONString(buf, mj.Stream)
+	}
+	if len(mj.RawAttrs) > 0 {
+		if first {
+			first = false
+		} else {
+			buf.WriteString(`,`)
+		}
+		buf.WriteString(`"attrs":`)
+		buf.Write(mj.RawAttrs)
+	}
+	if !first {
+		buf.WriteString(`,`)
+	}
+	buf.WriteString(`"time":`)
+	buf.WriteString(mj.Created)
+	buf.WriteString(`}`)
+	return nil
+}
+
+// This is based on ffjsonWriteJSONBytesAsString. It has been changed
+// to accept a string passed as a slice of bytes.
+func ffjsonWriteJSONBytesAsString(buf *bytes.Buffer, s []byte) {
+	const hex = "0123456789abcdef"
+
+	buf.WriteByte('"')
+	start := 0
+	for i := 0; i < len(s); {
+		if b := s[i]; b < utf8.RuneSelf {
+			if 0x20 <= b && b != '\\' && b != '"' && b != '<' && b != '>' && b != '&' {
+				i++
+				continue
+			}
+			if start < i {
+				buf.Write(s[start:i])
+			}
+			switch b {
+			case '\\', '"':
+				buf.WriteByte('\\')
+				buf.WriteByte(b)
+			case '\n':
+				buf.WriteByte('\\')
+				buf.WriteByte('n')
+			case '\r':
+				buf.WriteByte('\\')
+				buf.WriteByte('r')
+			default:
+
+				buf.WriteString(`\u00`)
+				buf.WriteByte(hex[b>>4])
+				buf.WriteByte(hex[b&0xF])
+			}
+			i++
+			start = i
+			continue
+		}
+		c, size := utf8.DecodeRune(s[i:])
+		if c == utf8.RuneError && size == 1 {
+			if start < i {
+				buf.Write(s[start:i])
+			}
+			buf.WriteString(`\ufffd`)
+			i += size
+			start = i
+			continue
+		}
+
+		if c == '\u2028' || c == '\u2029' {
+			if start < i {
+				buf.Write(s[start:i])
+			}
+			buf.WriteString(`\u202`)
+			buf.WriteByte(hex[c&0xF])
+			i += size
+			start = i
+			continue
+		}
+		i += size
+	}
+	if start < len(s) {
+		buf.Write(s[start:])
+	}
+	buf.WriteByte('"')
+}

vendor/github.com/docker/docker/pkg/timeutils/json.go → vendor/github.com/docker/docker/pkg/jsonlog/time_marshalling.go

-package timeutils
+// Package jsonlog provides helper functions to parse and print time (time.Time) as JSON.
+package jsonlog
 
 import (
 	"errors"
@@ -14,9 +15,9 @@ const (
 	JSONFormat = `"` + time.RFC3339Nano + `"`
 )
 
-// FastMarshalJSON avoids one of the extra allocations that
+// FastTimeMarshalJSON avoids one of the extra allocations that
 // time.MarshalJSON is making.
-func FastMarshalJSON(t time.Time) (string, error) {
+func FastTimeMarshalJSON(t time.Time) (string, error) {
 	if y := t.Year(); y < 0 || y >= 10000 {
 		// RFC 3339 is clear that years are 4 digits exactly.
 		// See golang.org/issue/4556#c15 for more discussion.

vendor/github.com/docker/docker/pkg/jsonmessage/jsonmessage.go

@@ -7,11 +7,13 @@ import (
 	"strings"
 	"time"
 
+	"github.com/docker/docker/pkg/jsonlog"
 	"github.com/docker/docker/pkg/term"
-	"github.com/docker/docker/pkg/timeutils"
-	"github.com/docker/docker/pkg/units"
+	"github.com/docker/go-units"
 )
 
+// JSONError wraps a concrete Code and Message, `Code` is
+// is a integer error code, `Message` is the error message.
 type JSONError struct {
 	Code    int    `json:"code,omitempty"`
 	Message string `json:"message,omitempty"`
@@ -21,10 +23,14 @@ func (e *JSONError) Error() string {
 	return e.Message
 }
 
+// JSONProgress describes a Progress. terminalFd is the fd of the current terminal,
+// Start is the initial value for the operation. Current is the current status and
+// value of the progress made towards Total. Total is the end value describing when
+// we made 100% progress for an operation.
 type JSONProgress struct {
 	terminalFd uintptr
-	Current    int   `json:"current,omitempty"`
-	Total      int   `json:"total,omitempty"`
+	Current    int64 `json:"current,omitempty"`
+	Total      int64 `json:"total,omitempty"`
 	Start      int64 `json:"start,omitempty"`
 }
 
@@ -54,17 +60,23 @@ func (p *JSONProgress) String() string {
 		percentage = 50
 	}
 	if width > 110 {
-		// this number can't be negetive gh#7136
+		// this number can't be negative gh#7136
 		numSpaces := 0
 		if 50-percentage > 0 {
 			numSpaces = 50 - percentage
 		}
 		pbBox = fmt.Sprintf("[%s>%s] ", strings.Repeat("=", percentage), strings.Repeat(" ", numSpaces))
 	}
+
 	numbersBox = fmt.Sprintf("%8v/%v", current, total)
 
+	if p.Current > p.Total {
+		// remove total display if the reported current is wonky.
+		numbersBox = fmt.Sprintf("%8v", current)
+	}
+
 	if p.Current > 0 && p.Start > 0 && percentage < 50 {
-		fromStart := time.Now().UTC().Sub(time.Unix(int64(p.Start), 0))
+		fromStart := time.Now().UTC().Sub(time.Unix(p.Start, 0))
 		perEntry := fromStart / time.Duration(p.Current)
 		left := time.Duration(p.Total-p.Current) * perEntry
 		left = (left / time.Second) * time.Second
@@ -76,6 +88,9 @@ func (p *JSONProgress) String() string {
 	return pbBox + numbersBox + timeLeftBox
 }
 
+// JSONMessage defines a message struct. It describes
+// the created time, where it from, status, ID of the
+// message. It's used for docker events.
 type JSONMessage struct {
 	Stream          string        `json:"stream,omitempty"`
 	Status          string        `json:"status,omitempty"`
@@ -84,10 +99,16 @@ type JSONMessage struct {
 	ID              string        `json:"id,omitempty"`
 	From            string        `json:"from,omitempty"`
 	Time            int64         `json:"time,omitempty"`
+	TimeNano        int64         `json:"timeNano,omitempty"`
 	Error           *JSONError    `json:"errorDetail,omitempty"`
 	ErrorMessage    string        `json:"error,omitempty"` //deprecated
+	// Aux contains out-of-band data, such as digests for push signing.
+	Aux *json.RawMessage `json:"aux,omitempty"`
 }
 
+// Display displays the JSONMessage to `out`. `isTerminal` describes if `out`
+// is a terminal. If this is the case, it will erase the entire current line
+// when displaying the progressbar.
 func (jm *JSONMessage) Display(out io.Writer, isTerminal bool) error {
 	if jm.Error != nil {
 		if jm.Error.Code == 401 {
@@ -103,8 +124,10 @@ func (jm *JSONMessage) Display(out io.Writer, isTerminal bool) error {
 	} else if jm.Progress != nil && jm.Progress.String() != "" { //disable progressbar in non-terminal
 		return nil
 	}
-	if jm.Time != 0 {
-		fmt.Fprintf(out, "%s ", time.Unix(jm.Time, 0).Format(timeutils.RFC3339NanoFixed))
+	if jm.TimeNano != 0 {
+		fmt.Fprintf(out, "%s ", time.Unix(0, jm.TimeNano).Format(jsonlog.RFC3339NanoFixed))
+	} else if jm.Time != 0 {
+		fmt.Fprintf(out, "%s ", time.Unix(jm.Time, 0).Format(jsonlog.RFC3339NanoFixed))
 	}
 	if jm.ID != "" {
 		fmt.Fprintf(out, "%s: ", jm.ID)
@@ -124,13 +147,16 @@ func (jm *JSONMessage) Display(out io.Writer, isTerminal bool) error {
 	return nil
 }
 
-func DisplayJSONMessagesStream(in io.Reader, out io.Writer, terminalFd uintptr, isTerminal bool) error {
+// DisplayJSONMessagesStream displays a json message stream from `in` to `out`, `isTerminal`
+// describes if `out` is a terminal. If this is the case, it will print `\n` at the end of
+// each line and move the cursor while displaying.
+func DisplayJSONMessagesStream(in io.Reader, out io.Writer, terminalFd uintptr, isTerminal bool, auxCallback func(*json.RawMessage)) error {
 	var (
-		dec  = json.NewDecoder(in)
-		ids  = make(map[string]int)
-		diff = 0
+		dec = json.NewDecoder(in)
+		ids = make(map[string]int)
 	)
 	for {
+		diff := 0
 		var jm JSONMessage
 		if err := dec.Decode(&jm); err != nil {
 			if err == io.EOF {
@@ -139,28 +165,51 @@ func DisplayJSONMessagesStream(in io.Reader, out io.Writer, terminalFd uintptr,
 			return err
 		}
 
+		if jm.Aux != nil {
+			if auxCallback != nil {
+				auxCallback(jm.Aux)
+			}
+			continue
+		}
+
 		if jm.Progress != nil {
 			jm.Progress.terminalFd = terminalFd
 		}
 		if jm.ID != "" && (jm.Progress != nil || jm.ProgressMessage != "") {
 			line, ok := ids[jm.ID]
 			if !ok {
+				// NOTE: This approach of using len(id) to
+				// figure out the number of lines of history
+				// only works as long as we clear the history
+				// when we output something that's not
+				// accounted for in the map, such as a line
+				// with no ID.
 				line = len(ids)
 				ids[jm.ID] = line
 				if isTerminal {
 					fmt.Fprintf(out, "\n")
 				}
-				diff = 0
 			} else {
 				diff = len(ids) - line
 			}
-			if jm.ID != "" && isTerminal {
+			if isTerminal {
+				// NOTE: this appears to be necessary even if
+				// diff == 0.
 				// <ESC>[{diff}A = move cursor up diff rows
 				fmt.Fprintf(out, "%c[%dA", 27, diff)
 			}
+		} else {
+			// When outputting something that isn't progress
+			// output, clear the history of previous lines. We
+			// don't want progress entries from some previous
+			// operation to be updated (for example, pull -a
+			// with multiple tags).
+			ids = make(map[string]int)
 		}
 		err := jm.Display(out, isTerminal)
 		if jm.ID != "" && isTerminal {
+			// NOTE: this appears to be necessary even if
+			// diff == 0.
 			// <ESC>[{diff}B = move cursor down diff rows
 			fmt.Fprintf(out, "%c[%dB", 27, diff)
 		}

vendor/github.com/docker/docker/pkg/longpath/longpath.go

+// longpath introduces some constants and helper functions for handling long paths
+// in Windows, which are expected to be prepended with `\\?\` and followed by either
+// a drive letter, a UNC server\share, or a volume identifier.
+
+package longpath
+
+import (
+	"strings"
+)
+
+// Prefix is the longpath prefix for Windows file paths.
+const Prefix = `\\?\`
+
+// AddPrefix will add the Windows long path prefix to the path provided if
+// it does not already have it.
+func AddPrefix(path string) string {
+	if !strings.HasPrefix(path, Prefix) {
+		if strings.HasPrefix(path, `\\`) {
+			// This is a UNC path, so we need to add 'UNC' to the path as well.
+			path = Prefix + `UNC` + path[1:]
+		} else {
+			path = Prefix + path
+		}
+	}
+	return path
+}

vendor/github.com/docker/docker/pkg/mount/flags.go

 package mount
 
 import (
+	"fmt"
 	"strings"
 )
 
@@ -67,3 +68,25 @@ func parseOptions(options string) (int, string) {
 	}
 	return flag, strings.Join(data, ",")
 }
+
+// ParseTmpfsOptions parse fstab type mount options into flags and data
+func ParseTmpfsOptions(options string) (int, string, error) {
+	flags, data := parseOptions(options)
+	validFlags := map[string]bool{
+		"":          true,
+		"size":      true,
+		"mode":      true,
+		"uid":       true,
+		"gid":       true,
+		"nr_inodes": true,
+		"nr_blocks": true,
+		"mpol":      true,
+	}
+	for _, o := range strings.Split(data, ",") {
+		opt := strings.SplitN(o, "=", 2)
+		if !validFlags[opt[0]] {
+			return 0, "", fmt.Errorf("Invalid tmpfs option %q", opt)
+		}
+	}
+	return flags, data, nil
+}

vendor/github.com/docker/docker/pkg/mount/flags_linux.go

@@ -23,7 +23,7 @@ const (
 	SYNCHRONOUS = syscall.MS_SYNCHRONOUS
 
 	// DIRSYNC will force all directory updates within the file system to be done
-	// synchronously. This affects the following system calls: creat, link,
+	// synchronously. This affects the following system calls: create, link,
 	// unlink, symlink, mkdir, rmdir, mknod and rename.
 	DIRSYNC = syscall.MS_DIRSYNC
 

vendor/github.com/docker/docker/pkg/mount/mountinfo_unsupported.go

-// +build !linux,!freebsd freebsd,!cgo
+// +build !windows,!linux,!freebsd freebsd,!cgo
 
 package mount
 

vendor/github.com/docker/docker/pkg/mount/mountinfo_windows.go

+package mount
+
+func parseMountTable() ([]*Info, error) {
+	// Do NOT return an error!
+	return nil, nil
+}

vendor/github.com/docker/docker/pkg/mount/sharedsubtree_linux.go

@@ -61,8 +61,7 @@ func ensureMountedAs(mountPoint, options string) error {
 			return err
 		}
 	}
-	mounted, err = Mounted(mountPoint)
-	if err != nil {
+	if _, err = Mounted(mountPoint); err != nil {
 		return err
 	}
 

vendor/github.com/docker/docker/pkg/stdcopy/stdcopy.go

@@ -3,44 +3,57 @@ package stdcopy
 import (
 	"encoding/binary"
 	"errors"
+	"fmt"
 	"io"
 
 	"github.com/Sirupsen/logrus"
 )
 
-const (
-	StdWriterPrefixLen = 8
-	StdWriterFdIndex   = 0
-	StdWriterSizeIndex = 4
-)
-
-type StdType [StdWriterPrefixLen]byte
+// StdType is the type of standard stream
+// a writer can multiplex to.
+type StdType byte
 
-var (
-	Stdin  StdType = StdType{0: 0}
-	Stdout StdType = StdType{0: 1}
-	Stderr StdType = StdType{0: 2}
+const (
+	// Stdin represents standard input stream type.
+	Stdin StdType = iota
+	// Stdout represents standard output stream type.
+	Stdout
+	// Stderr represents standard error steam type.
+	Stderr
+
+	stdWriterPrefixLen = 8
+	stdWriterFdIndex   = 0
+	stdWriterSizeIndex = 4
+
+	startingBufLen = 32*1024 + stdWriterPrefixLen + 1
 )
 
-type StdWriter struct {
+// stdWriter is wrapper of io.Writer with extra customized info.
+type stdWriter struct {
 	io.Writer
-	prefix  StdType
-	sizeBuf []byte
+	prefix byte
 }
 
-func (w *StdWriter) Write(buf []byte) (n int, err error) {
-	var n1, n2 int
+// Write sends the buffer to the underneath writer.
+// It insert the prefix header before the buffer,
+// so stdcopy.StdCopy knows where to multiplex the output.
+// It makes stdWriter to implement io.Writer.
+func (w *stdWriter) Write(buf []byte) (n int, err error) {
 	if w == nil || w.Writer == nil {
 		return 0, errors.New("Writer not instantiated")
 	}
-	binary.BigEndian.PutUint32(w.prefix[4:], uint32(len(buf)))
-	n1, err = w.Writer.Write(w.prefix[:])
-	if err != nil {
-		n = n1 - StdWriterPrefixLen
-	} else {
-		n2, err = w.Writer.Write(buf)
-		n = n1 + n2 - StdWriterPrefixLen
+	if buf == nil {
+		return 0, nil
 	}
+
+	header := [stdWriterPrefixLen]byte{stdWriterFdIndex: w.prefix}
+	binary.BigEndian.PutUint32(header[stdWriterSizeIndex:], uint32(len(buf)))
+
+	line := append(header[:], buf...)
+
+	n, err = w.Writer.Write(line)
+	n -= stdWriterPrefixLen
+
 	if n < 0 {
 		n = 0
 	}
@@ -53,16 +66,13 @@ func (w *StdWriter) Write(buf []byte) (n int, err error) {
 // This allows multiple write streams (e.g. stdout and stderr) to be muxed into a single connection.
 // `t` indicates the id of the stream to encapsulate.
 // It can be stdcopy.Stdin, stdcopy.Stdout, stdcopy.Stderr.
-func NewStdWriter(w io.Writer, t StdType) *StdWriter {
-	return &StdWriter{
-		Writer:  w,
-		prefix:  t,
-		sizeBuf: make([]byte, 4),
+func NewStdWriter(w io.Writer, t StdType) io.Writer {
+	return &stdWriter{
+		Writer: w,
+		prefix: byte(t),
 	}
 }
 
-var ErrInvalidStdHeader = errors.New("Unrecognized input header")
-
 // StdCopy is a modified version of io.Copy.
 //
 // StdCopy will demultiplex `src`, assuming that it contains two streams,
@@ -75,7 +85,7 @@ var ErrInvalidStdHeader = errors.New("Unrecognized input header")
 // `written` will hold the total number of bytes written to `dstout` and `dsterr`.
 func StdCopy(dstout, dsterr io.Writer, src io.Reader) (written int64, err error) {
 	var (
-		buf       = make([]byte, 32*1024+StdWriterPrefixLen+1)
+		buf       = make([]byte, startingBufLen)
 		bufLen    = len(buf)
 		nr, nw    int
 		er, ew    error
@@ -85,12 +95,12 @@ func StdCopy(dstout, dsterr io.Writer, src io.Reader) (written int64, err error)
 
 	for {
 		// Make sure we have at least a full header
-		for nr < StdWriterPrefixLen {
+		for nr < stdWriterPrefixLen {
 			var nr2 int
 			nr2, er = src.Read(buf[nr:])
 			nr += nr2
 			if er == io.EOF {
-				if nr < StdWriterPrefixLen {
+				if nr < stdWriterPrefixLen {
 					logrus.Debugf("Corrupted prefix: %v", buf[:nr])
 					return written, nil
 				}
@@ -103,40 +113,40 @@ func StdCopy(dstout, dsterr io.Writer, src io.Reader) (written int64, err error)
 		}
 
 		// Check the first byte to know where to write
-		switch buf[StdWriterFdIndex] {
-		case 0:
+		switch StdType(buf[stdWriterFdIndex]) {
+		case Stdin:
 			fallthrough
-		case 1:
+		case Stdout:
 			// Write on stdout
 			out = dstout
-		case 2:
+		case Stderr:
 			// Write on stderr
 			out = dsterr
 		default:
-			logrus.Debugf("Error selecting output fd: (%d)", buf[StdWriterFdIndex])
-			return 0, ErrInvalidStdHeader
+			logrus.Debugf("Error selecting output fd: (%d)", buf[stdWriterFdIndex])
+			return 0, fmt.Errorf("Unrecognized input header: %d", buf[stdWriterFdIndex])
 		}
 
 		// Retrieve the size of the frame
-		frameSize = int(binary.BigEndian.Uint32(buf[StdWriterSizeIndex : StdWriterSizeIndex+4]))
+		frameSize = int(binary.BigEndian.Uint32(buf[stdWriterSizeIndex : stdWriterSizeIndex+4]))
 		logrus.Debugf("framesize: %d", frameSize)
 
 		// Check if the buffer is big enough to read the frame.
 		// Extend it if necessary.
-		if frameSize+StdWriterPrefixLen > bufLen {
-			logrus.Debugf("Extending buffer cap by %d (was %d)", frameSize+StdWriterPrefixLen-bufLen+1, len(buf))
-			buf = append(buf, make([]byte, frameSize+StdWriterPrefixLen-bufLen+1)...)
+		if frameSize+stdWriterPrefixLen > bufLen {
+			logrus.Debugf("Extending buffer cap by %d (was %d)", frameSize+stdWriterPrefixLen-bufLen+1, len(buf))
+			buf = append(buf, make([]byte, frameSize+stdWriterPrefixLen-bufLen+1)...)
 			bufLen = len(buf)
 		}
 
 		// While the amount of bytes read is less than the size of the frame + header, we keep reading
-		for nr < frameSize+StdWriterPrefixLen {
+		for nr < frameSize+stdWriterPrefixLen {
 			var nr2 int
 			nr2, er = src.Read(buf[nr:])
 			nr += nr2
 			if er == io.EOF {
-				if nr < frameSize+StdWriterPrefixLen {
-					logrus.Debugf("Corrupted frame: %v", buf[StdWriterPrefixLen:nr])
+				if nr < frameSize+stdWriterPrefixLen {
+					logrus.Debugf("Corrupted frame: %v", buf[stdWriterPrefixLen:nr])
 					return written, nil
 				}
 				break
@@ -148,7 +158,7 @@ func StdCopy(dstout, dsterr io.Writer, src io.Reader) (written int64, err error)
 		}
 
 		// Write the retrieved frame (without header)
-		nw, ew = out.Write(buf[StdWriterPrefixLen : frameSize+StdWriterPrefixLen])
+		nw, ew = out.Write(buf[stdWriterPrefixLen : frameSize+stdWriterPrefixLen])
 		if ew != nil {
 			logrus.Debugf("Error writing frame: %s", ew)
 			return 0, ew
@@ -161,8 +171,8 @@ func StdCopy(dstout, dsterr io.Writer, src io.Reader) (written int64, err error)
 		written += int64(nw)
 
 		// Move the rest of the buffer to the beginning
-		copy(buf, buf[frameSize+StdWriterPrefixLen:])
+		copy(buf, buf[frameSize+stdWriterPrefixLen:])
 		// Move the index
-		nr -= frameSize + StdWriterPrefixLen
+		nr -= frameSize + stdWriterPrefixLen
 	}
 }

vendor/github.com/docker/docker/pkg/symlink/LICENSE.APACHE

@@ -176,7 +176,7 @@
 
    END OF TERMS AND CONDITIONS
 
-   Copyright 2014-2015 Docker, Inc.
+   Copyright 2014-2016 Docker, Inc.
 
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.

vendor/github.com/docker/docker/pkg/symlink/LICENSE.BSD

-Copyright (c) 2014-2015 The Docker & Go Authors. All rights reserved.
+Copyright (c) 2014-2016 The Docker & Go Authors. All rights reserved.
 
 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are

vendor/github.com/docker/docker/pkg/symlink/README.md

-Package symlink implements EvalSymlinksInScope which is an extension of filepath.EvalSymlinks
+Package symlink implements EvalSymlinksInScope which is an extension of filepath.EvalSymlinks,
+as well as a Windows long-path aware version of filepath.EvalSymlinks
 from the [Go standard library](https://golang.org/pkg/path/filepath).
 
 The code from filepath.EvalSymlinks has been adapted in fs.go.

vendor/github.com/docker/docker/pkg/symlink/fs.go

@@ -12,15 +12,18 @@ import (
 	"os"
 	"path/filepath"
 	"strings"
+
+	"github.com/docker/docker/pkg/system"
 )
 
-// FollowSymlinkInScope is a wrapper around evalSymlinksInScope that returns an absolute path
+// FollowSymlinkInScope is a wrapper around evalSymlinksInScope that returns an
+// absolute path. This function handles paths in a platform-agnostic manner.
 func FollowSymlinkInScope(path, root string) (string, error) {
-	path, err := filepath.Abs(path)
+	path, err := filepath.Abs(filepath.FromSlash(path))
 	if err != nil {
 		return "", err
 	}
-	root, err = filepath.Abs(root)
+	root, err = filepath.Abs(filepath.FromSlash(root))
 	if err != nil {
 		return "", err
 	}
@@ -119,7 +122,7 @@ func evalSymlinksInScope(path, root string) (string, error) {
 		if err != nil {
 			return "", err
 		}
-		if filepath.IsAbs(dest) {
+		if system.IsAbs(dest) {
 			b.Reset()
 		}
 		path = dest + string(filepath.Separator) + path
@@ -129,3 +132,12 @@ func evalSymlinksInScope(path, root string) (string, error) {
 	// what's happening here
 	return filepath.Clean(root + filepath.Clean(string(filepath.Separator)+b.String())), nil
 }
+
+// EvalSymlinks returns the path name after the evaluation of any symbolic
+// links.
+// If path is relative the result will be relative to the current directory,
+// unless one of the components is an absolute symbolic link.
+// This version has been updated to support long paths prepended with `\\?\`.
+func EvalSymlinks(path string) (string, error) {
+	return evalSymlinks(path)
+}

vendor/github.com/docker/docker/pkg/symlink/fs_unix.go

+// +build !windows
+
+package symlink
+
+import (
+	"path/filepath"
+)
+
+func evalSymlinks(path string) (string, error) {
+	return filepath.EvalSymlinks(path)
+}

vendor/github.com/docker/docker/pkg/symlink/fs_windows.go

+package symlink
+
+import (
+	"bytes"
+	"errors"
+	"os"
+	"path/filepath"
+	"strings"
+	"syscall"
+
+	"github.com/docker/docker/pkg/longpath"
+)
+
+func toShort(path string) (string, error) {
+	p, err := syscall.UTF16FromString(path)
+	if err != nil {
+		return "", err
+	}
+	b := p // GetShortPathName says we can reuse buffer
+	n, err := syscall.GetShortPathName(&p[0], &b[0], uint32(len(b)))
+	if err != nil {
+		return "", err
+	}
+	if n > uint32(len(b)) {
+		b = make([]uint16, n)
+		if _, err = syscall.GetShortPathName(&p[0], &b[0], uint32(len(b))); err != nil {
+			return "", err
+		}
+	}
+	return syscall.UTF16ToString(b), nil
+}
+
+func toLong(path string) (string, error) {
+	p, err := syscall.UTF16FromString(path)
+	if err != nil {
+		return "", err
+	}
+	b := p // GetLongPathName says we can reuse buffer
+	n, err := syscall.GetLongPathName(&p[0], &b[0], uint32(len(b)))
+	if err != nil {
+		return "", err
+	}
+	if n > uint32(len(b)) {
+		b = make([]uint16, n)
+		n, err = syscall.GetLongPathName(&p[0], &b[0], uint32(len(b)))
+		if err != nil {
+			return "", err
+		}
+	}
+	b = b[:n]
+	return syscall.UTF16ToString(b), nil
+}
+
+func evalSymlinks(path string) (string, error) {
+	path, err := walkSymlinks(path)
+	if err != nil {
+		return "", err
+	}
+
+	p, err := toShort(path)
+	if err != nil {
+		return "", err
+	}
+	p, err = toLong(p)
+	if err != nil {
+		return "", err
+	}
+	// syscall.GetLongPathName does not change the case of the drive letter,
+	// but the result of EvalSymlinks must be unique, so we have
+	// EvalSymlinks(`c:\a`) == EvalSymlinks(`C:\a`).
+	// Make drive letter upper case.
+	if len(p) >= 2 && p[1] == ':' && 'a' <= p[0] && p[0] <= 'z' {
+		p = string(p[0]+'A'-'a') + p[1:]
+	} else if len(p) >= 6 && p[5] == ':' && 'a' <= p[4] && p[4] <= 'z' {
+		p = p[:3] + string(p[4]+'A'-'a') + p[5:]
+	}
+	return filepath.Clean(p), nil
+}
+
+const utf8RuneSelf = 0x80
+
+func walkSymlinks(path string) (string, error) {
+	const maxIter = 255
+	originalPath := path
+	// consume path by taking each frontmost path element,
+	// expanding it if it's a symlink, and appending it to b
+	var b bytes.Buffer
+	for n := 0; path != ""; n++ {
+		if n > maxIter {
+			return "", errors.New("EvalSymlinks: too many links in " + originalPath)
+		}
+
+		// A path beginning with `\\?\` represents the root, so automatically
+		// skip that part and begin processing the next segment.
+		if strings.HasPrefix(path, longpath.Prefix) {
+			b.WriteString(longpath.Prefix)
+			path = path[4:]
+			continue
+		}
+
+		// find next path component, p
+		var i = -1
+		for j, c := range path {
+			if c < utf8RuneSelf && os.IsPathSeparator(uint8(c)) {
+				i = j
+				break
+			}
+		}
+		var p string
+		if i == -1 {
+			p, path = path, ""
+		} else {
+			p, path = path[:i], path[i+1:]
+		}
+
+		if p == "" {
+			if b.Len() == 0 {
+				// must be absolute path
+				b.WriteRune(filepath.Separator)
+			}
+			continue
+		}
+
+		// If this is the first segment after the long path prefix, accept the
+		// current segment as a volume root or UNC share and move on to the next.
+		if b.String() == longpath.Prefix {
+			b.WriteString(p)
+			b.WriteRune(filepath.Separator)
+			continue
+		}
+
+		fi, err := os.Lstat(b.String() + p)
+		if err != nil {
+			return "", err
+		}
+		if fi.Mode()&os.ModeSymlink == 0 {
+			b.WriteString(p)
+			if path != "" || (b.Len() == 2 && len(p) == 2 && p[1] == ':') {
+				b.WriteRune(filepath.Separator)
+			}
+			continue
+		}
+
+		// it's a symlink, put it at the front of path
+		dest, err := os.Readlink(b.String() + p)
+		if err != nil {
+			return "", err
+		}
+		if filepath.IsAbs(dest) || os.IsPathSeparator(dest[0]) {
+			b.Reset()
+		}
+		path = dest + string(filepath.Separator) + path
+	}
+	return filepath.Clean(b.String()), nil
+}

vendor/github.com/docker/docker/pkg/system/chtimes.go

+package system
+
+import (
+	"os"
+	"syscall"
+	"time"
+	"unsafe"
+)
+
+var (
+	maxTime time.Time
+)
+
+func init() {
+	if unsafe.Sizeof(syscall.Timespec{}.Nsec) == 8 {
+		// This is a 64 bit timespec
+		// os.Chtimes limits time to the following
+		maxTime = time.Unix(0, 1<<63-1)
+	} else {
+		// This is a 32 bit timespec
+		maxTime = time.Unix(1<<31-1, 0)
+	}
+}
+
+// Chtimes changes the access time and modified time of a file at the given path
+func Chtimes(name string, atime time.Time, mtime time.Time) error {
+	unixMinTime := time.Unix(0, 0)
+	unixMaxTime := maxTime
+
+	// If the modified time is prior to the Unix Epoch, or after the
+	// end of Unix Time, os.Chtimes has undefined behavior
+	// default to Unix Epoch in this case, just in case
+
+	if atime.Before(unixMinTime) || atime.After(unixMaxTime) {
+		atime = unixMinTime
+	}
+
+	if mtime.Before(unixMinTime) || mtime.After(unixMaxTime) {
+		mtime = unixMinTime
+	}
+
+	if err := os.Chtimes(name, atime, mtime); err != nil {
+		return err
+	}
+
+	// Take platform specific action for setting create time.
+	if err := setCTime(name, mtime); err != nil {
+		return err
+	}
+
+	return nil
+}

vendor/github.com/docker/docker/pkg/system/chtimes_unix.go

+// +build !windows
+
+package system
+
+import (
+	"time"
+)
+
+//setCTime will set the create time on a file. On Unix, the create
+//time is updated as a side effect of setting the modified time, so
+//no action is required.
+func setCTime(path string, ctime time.Time) error {
+	return nil
+}

vendor/github.com/docker/docker/pkg/system/chtimes_windows.go

+// +build windows
+
+package system
+
+import (
+	"syscall"
+	"time"
+)
+
+//setCTime will set the create time on a file. On Windows, this requires
+//calling SetFileTime and explicitly including the create time.
+func setCTime(path string, ctime time.Time) error {
+	ctimespec := syscall.NsecToTimespec(ctime.UnixNano())
+	pathp, e := syscall.UTF16PtrFromString(path)
+	if e != nil {
+		return e
+	}
+	h, e := syscall.CreateFile(pathp,
+		syscall.FILE_WRITE_ATTRIBUTES, syscall.FILE_SHARE_WRITE, nil,
+		syscall.OPEN_EXISTING, syscall.FILE_FLAG_BACKUP_SEMANTICS, 0)
+	if e != nil {
+		return e
+	}
+	defer syscall.Close(h)
+	c := syscall.NsecToFiletime(syscall.TimespecToNsec(ctimespec))
+	return syscall.SetFileTime(h, &c, nil, nil)
+}

vendor/github.com/docker/docker/pkg/system/errors.go

+package system
+
+import (
+	"errors"
+)
+
+var (
+	// ErrNotSupportedPlatform means the platform is not supported.
+	ErrNotSupportedPlatform = errors.New("platform and architecture is not supported")
+)

vendor/github.com/docker/docker/pkg/system/events_windows.go

+package system
+
+// This file implements syscalls for Win32 events which are not implemented
+// in golang.
+
+import (
+	"syscall"
+	"unsafe"
+)
+
+var (
+	procCreateEvent = modkernel32.NewProc("CreateEventW")
+	procOpenEvent   = modkernel32.NewProc("OpenEventW")
+	procSetEvent    = modkernel32.NewProc("SetEvent")
+	procResetEvent  = modkernel32.NewProc("ResetEvent")
+	procPulseEvent  = modkernel32.NewProc("PulseEvent")
+)
+
+// CreateEvent implements win32 CreateEventW func in golang. It will create an event object.
+func CreateEvent(eventAttributes *syscall.SecurityAttributes, manualReset bool, initialState bool, name string) (handle syscall.Handle, err error) {
+	namep, _ := syscall.UTF16PtrFromString(name)
+	var _p1 uint32
+	if manualReset {
+		_p1 = 1
+	}
+	var _p2 uint32
+	if initialState {
+		_p2 = 1
+	}
+	r0, _, e1 := procCreateEvent.Call(uintptr(unsafe.Pointer(eventAttributes)), uintptr(_p1), uintptr(_p2), uintptr(unsafe.Pointer(namep)))
+	use(unsafe.Pointer(namep))
+	handle = syscall.Handle(r0)
+	if handle == syscall.InvalidHandle {
+		err = e1
+	}
+	return
+}
+
+// OpenEvent implements win32 OpenEventW func in golang. It opens an event object.
+func OpenEvent(desiredAccess uint32, inheritHandle bool, name string) (handle syscall.Handle, err error) {
+	namep, _ := syscall.UTF16PtrFromString(name)
+	var _p1 uint32
+	if inheritHandle {
+		_p1 = 1
+	}
+	r0, _, e1 := procOpenEvent.Call(uintptr(desiredAccess), uintptr(_p1), uintptr(unsafe.Pointer(namep)))
+	use(unsafe.Pointer(namep))
+	handle = syscall.Handle(r0)
+	if handle == syscall.InvalidHandle {
+		err = e1
+	}
+	return
+}
+
+// SetEvent implements win32 SetEvent func in golang.
+func SetEvent(handle syscall.Handle) (err error) {
+	return setResetPulse(handle, procSetEvent)
+}
+
+// ResetEvent implements win32 ResetEvent func in golang.
+func ResetEvent(handle syscall.Handle) (err error) {
+	return setResetPulse(handle, procResetEvent)
+}
+
+// PulseEvent implements win32 PulseEvent func in golang.
+func PulseEvent(handle syscall.Handle) (err error) {
+	return setResetPulse(handle, procPulseEvent)
+}
+
+func setResetPulse(handle syscall.Handle, proc *syscall.LazyProc) (err error) {
+	r0, _, _ := proc.Call(uintptr(handle))
+	if r0 != 0 {
+		err = syscall.Errno(r0)
+	}
+	return
+}
+
+var temp unsafe.Pointer
+
+// use ensures a variable is kept alive without the GC freeing while still needed
+func use(p unsafe.Pointer) {
+	temp = p
+}

vendor/github.com/docker/docker/pkg/system/filesys.go

+// +build !windows
+
+package system
+
+import (
+	"os"
+	"path/filepath"
+)
+
+// MkdirAll creates a directory named path along with any necessary parents,
+// with permission specified by attribute perm for all dir created.
+func MkdirAll(path string, perm os.FileMode) error {
+	return os.MkdirAll(path, perm)
+}
+
+// IsAbs is a platform-specific wrapper for filepath.IsAbs.
+func IsAbs(path string) bool {
+	return filepath.IsAbs(path)
+}

vendor/github.com/docker/docker/pkg/system/filesys_windows.go

+// +build windows
+
+package system
+
+import (
+	"os"
+	"path/filepath"
+	"regexp"
+	"strings"
+	"syscall"
+)
+
+// MkdirAll implementation that is volume path aware for Windows.
+func MkdirAll(path string, perm os.FileMode) error {
+	if re := regexp.MustCompile(`^\\\\\?\\Volume{[a-z0-9-]+}$`); re.MatchString(path) {
+		return nil
+	}
+
+	// The rest of this method is copied from os.MkdirAll and should be kept
+	// as-is to ensure compatibility.
+
+	// Fast path: if we can tell whether path is a directory or file, stop with success or error.
+	dir, err := os.Stat(path)
+	if err == nil {
+		if dir.IsDir() {
+			return nil
+		}
+		return &os.PathError{
+			Op:   "mkdir",
+			Path: path,
+			Err:  syscall.ENOTDIR,
+		}
+	}
+
+	// Slow path: make sure parent exists and then call Mkdir for path.
+	i := len(path)
+	for i > 0 && os.IsPathSeparator(path[i-1]) { // Skip trailing path separator.
+		i--
+	}
+
+	j := i
+	for j > 0 && !os.IsPathSeparator(path[j-1]) { // Scan backward over element.
+		j--
+	}
+
+	if j > 1 {
+		// Create parent
+		err = MkdirAll(path[0:j-1], perm)
+		if err != nil {
+			return err
+		}
+	}
+
+	// Parent now exists; invoke Mkdir and use its result.
+	err = os.Mkdir(path, perm)
+	if err != nil {
+		// Handle arguments like "foo/." by
+		// double-checking that directory doesn't exist.
+		dir, err1 := os.Lstat(path)
+		if err1 == nil && dir.IsDir() {
+			return nil
+		}
+		return err
+	}
+	return nil
+}
+
+// IsAbs is a platform-specific wrapper for filepath.IsAbs. On Windows,
+// golang filepath.IsAbs does not consider a path \windows\system32 as absolute
+// as it doesn't start with a drive-letter/colon combination. However, in
+// docker we need to verify things such as WORKDIR /windows/system32 in
+// a Dockerfile (which gets translated to \windows\system32 when being processed
+// by the daemon. This SHOULD be treated as absolute from a docker processing
+// perspective.
+func IsAbs(path string) bool {
+	if !filepath.IsAbs(path) {
+		if !strings.HasPrefix(path, string(os.PathSeparator)) {
+			return false
+		}
+	}
+	return true
+}

vendor/github.com/docker/docker/pkg/system/lstat.go

+// +build !windows
+
+package system
+
+import (
+	"syscall"
+)
+
+// Lstat takes a path to a file and returns
+// a system.StatT type pertaining to that file.
+//
+// Throws an error if the file does not exist
+func Lstat(path string) (*StatT, error) {
+	s := &syscall.Stat_t{}
+	if err := syscall.Lstat(path, s); err != nil {
+		return nil, err
+	}
+	return fromStatT(s)
+}

vendor/github.com/docker/docker/pkg/system/lstat_windows.go

+// +build windows
+
+package system
+
+import (
+	"os"
+)
+
+// Lstat calls os.Lstat to get a fileinfo interface back.
+// This is then copied into our own locally defined structure.
+// Note the Linux version uses fromStatT to do the copy back,
+// but that not strictly necessary when already in an OS specific module.
+func Lstat(path string) (*StatT, error) {
+	fi, err := os.Lstat(path)
+	if err != nil {
+		return nil, err
+	}
+
+	return &StatT{
+		name:    fi.Name(),
+		size:    fi.Size(),
+		mode:    fi.Mode(),
+		modTime: fi.ModTime(),
+		isDir:   fi.IsDir()}, nil
+}

vendor/github.com/docker/docker/pkg/system/meminfo.go

+package system
+
+// MemInfo contains memory statistics of the host system.
+type MemInfo struct {
+	// Total usable RAM (i.e. physical RAM minus a few reserved bits and the
+	// kernel binary code).
+	MemTotal int64
+
+	// Amount of free memory.
+	MemFree int64
+
+	// Total amount of swap space available.
+	SwapTotal int64
+
+	// Amount of swap space that is currently unused.
+	SwapFree int64
+}

vendor/github.com/docker/docker/pkg/system/meminfo_linux.go

+package system
+
+import (
+	"bufio"
+	"io"
+	"os"
+	"strconv"
+	"strings"
+
+	"github.com/docker/go-units"
+)
+
+// ReadMemInfo retrieves memory statistics of the host system and returns a
+// MemInfo type.
+func ReadMemInfo() (*MemInfo, error) {
+	file, err := os.Open("/proc/meminfo")
+	if err != nil {
+		return nil, err
+	}
+	defer file.Close()
+	return parseMemInfo(file)
+}
+
+// parseMemInfo parses the /proc/meminfo file into
+// a MemInfo object given an io.Reader to the file.
+// Throws error if there are problems reading from the file
+func parseMemInfo(reader io.Reader) (*MemInfo, error) {
+	meminfo := &MemInfo{}
+	scanner := bufio.NewScanner(reader)
+	for scanner.Scan() {
+		// Expected format: ["MemTotal:", "1234", "kB"]
+		parts := strings.Fields(scanner.Text())
+
+		// Sanity checks: Skip malformed entries.
+		if len(parts) < 3 || parts[2] != "kB" {
+			continue
+		}
+
+		// Convert to bytes.
+		size, err := strconv.Atoi(parts[1])
+		if err != nil {
+			continue
+		}
+		bytes := int64(size) * units.KiB
+
+		switch parts[0] {
+		case "MemTotal:":
+			meminfo.MemTotal = bytes
+		case "MemFree:":
+			meminfo.MemFree = bytes
+		case "SwapTotal:":
+			meminfo.SwapTotal = bytes
+		case "SwapFree:":
+			meminfo.SwapFree = bytes
+		}
+
+	}
+
+	// Handle errors that may have occurred during the reading of the file.
+	if err := scanner.Err(); err != nil {
+		return nil, err
+	}
+
+	return meminfo, nil
+}

vendor/github.com/docker/docker/pkg/system/meminfo_unsupported.go

+// +build !linux,!windows
+
+package system
+
+// ReadMemInfo is not supported on platforms other than linux and windows.
+func ReadMemInfo() (*MemInfo, error) {
+	return nil, ErrNotSupportedPlatform
+}

vendor/github.com/docker/docker/pkg/system/meminfo_windows.go

+package system
+
+import (
+	"syscall"
+	"unsafe"
+)
+
+var (
+	modkernel32 = syscall.NewLazyDLL("kernel32.dll")
+
+	procGlobalMemoryStatusEx = modkernel32.NewProc("GlobalMemoryStatusEx")
+)
+
+// https://msdn.microsoft.com/en-us/library/windows/desktop/aa366589(v=vs.85).aspx
+// https://msdn.microsoft.com/en-us/library/windows/desktop/aa366770(v=vs.85).aspx
+type memorystatusex struct {
+	dwLength                uint32
+	dwMemoryLoad            uint32
+	ullTotalPhys            uint64
+	ullAvailPhys            uint64
+	ullTotalPageFile        uint64
+	ullAvailPageFile        uint64
+	ullTotalVirtual         uint64
+	ullAvailVirtual         uint64
+	ullAvailExtendedVirtual uint64
+}
+
+// ReadMemInfo retrieves memory statistics of the host system and returns a
+//  MemInfo type.
+func ReadMemInfo() (*MemInfo, error) {
+	msi := &memorystatusex{
+		dwLength: 64,
+	}
+	r1, _, _ := procGlobalMemoryStatusEx.Call(uintptr(unsafe.Pointer(msi)))
+	if r1 == 0 {
+		return &MemInfo{}, nil
+	}
+	return &MemInfo{
+		MemTotal:  int64(msi.ullTotalPhys),
+		MemFree:   int64(msi.ullAvailPhys),
+		SwapTotal: int64(msi.ullTotalPageFile),
+		SwapFree:  int64(msi.ullAvailPageFile),
+	}, nil
+}

vendor/github.com/docker/docker/pkg/system/mknod.go

+// +build !windows
+
+package system
+
+import (
+	"syscall"
+)
+
+// Mknod creates a filesystem node (file, device special file or named pipe) named path
+// with attributes specified by mode and dev.
+func Mknod(path string, mode uint32, dev int) error {
+	return syscall.Mknod(path, mode, dev)
+}
+
+// Mkdev is used to build the value of linux devices (in /dev/) which specifies major
+// and minor number of the newly created device special file.
+// Linux device nodes are a bit weird due to backwards compat with 16 bit device nodes.
+// They are, from low to high: the lower 8 bits of the minor, then 12 bits of the major,
+// then the top 12 bits of the minor.
+func Mkdev(major int64, minor int64) uint32 {
+	return uint32(((minor & 0xfff00) << 12) | ((major & 0xfff) << 8) | (minor & 0xff))
+}

vendor/github.com/docker/docker/pkg/system/mknod_windows.go

+// +build windows
+
+package system
+
+// Mknod is not implemented on Windows.
+func Mknod(path string, mode uint32, dev int) error {
+	return ErrNotSupportedPlatform
+}
+
+// Mkdev is not implemented on Windows.
+func Mkdev(major int64, minor int64) uint32 {
+	panic("Mkdev not implemented on Windows.")
+}

vendor/github.com/docker/docker/pkg/system/path_unix.go

+// +build !windows
+
+package system
+
+// DefaultPathEnv is unix style list of directories to search for
+// executables. Each directory is separated from the next by a colon
+// ':' character .
+const DefaultPathEnv = "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"

vendor/github.com/docker/docker/pkg/system/path_windows.go

+// +build windows
+
+package system
+
+// DefaultPathEnv is deliberately empty on Windows as the default path will be set by
+// the container. Docker has no context of what the default path should be.
+const DefaultPathEnv = ""

vendor/github.com/docker/docker/pkg/system/stat.go

+// +build !windows
+
+package system
+
+import (
+	"syscall"
+)
+
+// StatT type contains status of a file. It contains metadata
+// like permission, owner, group, size, etc about a file.
+type StatT struct {
+	mode uint32
+	uid  uint32
+	gid  uint32
+	rdev uint64
+	size int64
+	mtim syscall.Timespec
+}
+
+// Mode returns file's permission mode.
+func (s StatT) Mode() uint32 {
+	return s.mode
+}
+
+// UID returns file's user id of owner.
+func (s StatT) UID() uint32 {
+	return s.uid
+}
+
+// GID returns file's group id of owner.
+func (s StatT) GID() uint32 {
+	return s.gid
+}
+
+// Rdev returns file's device ID (if it's special file).
+func (s StatT) Rdev() uint64 {
+	return s.rdev
+}
+
+// Size returns file's size.
+func (s StatT) Size() int64 {
+	return s.size
+}
+
+// Mtim returns file's last modification time.
+func (s StatT) Mtim() syscall.Timespec {
+	return s.mtim
+}
+
+// GetLastModification returns file's last modification time.
+func (s StatT) GetLastModification() syscall.Timespec {
+	return s.Mtim()
+}

vendor/github.com/docker/docker/pkg/system/stat_freebsd.go

+package system
+
+import (
+	"syscall"
+)
+
+// fromStatT converts a syscall.Stat_t type to a system.Stat_t type
+func fromStatT(s *syscall.Stat_t) (*StatT, error) {
+	return &StatT{size: s.Size,
+		mode: uint32(s.Mode),
+		uid:  s.Uid,
+		gid:  s.Gid,
+		rdev: uint64(s.Rdev),
+		mtim: s.Mtimespec}, nil
+}
+
+// Stat takes a path to a file and returns
+// a system.Stat_t type pertaining to that file.
+//
+// Throws an error if the file does not exist
+func Stat(path string) (*StatT, error) {
+	s := &syscall.Stat_t{}
+	if err := syscall.Stat(path, s); err != nil {
+		return nil, err
+	}
+	return fromStatT(s)
+}

vendor/github.com/docker/docker/pkg/system/stat_linux.go

+package system
+
+import (
+	"syscall"
+)
+
+// fromStatT converts a syscall.Stat_t type to a system.Stat_t type
+func fromStatT(s *syscall.Stat_t) (*StatT, error) {
+	return &StatT{size: s.Size,
+		mode: s.Mode,
+		uid:  s.Uid,
+		gid:  s.Gid,
+		rdev: s.Rdev,
+		mtim: s.Mtim}, nil
+}
+
+// FromStatT exists only on linux, and loads a system.StatT from a
+// syscal.Stat_t.
+func FromStatT(s *syscall.Stat_t) (*StatT, error) {
+	return fromStatT(s)
+}
+
+// Stat takes a path to a file and returns
+// a system.StatT type pertaining to that file.
+//
+// Throws an error if the file does not exist
+func Stat(path string) (*StatT, error) {
+	s := &syscall.Stat_t{}
+	if err := syscall.Stat(path, s); err != nil {
+		return nil, err
+	}
+	return fromStatT(s)
+}

vendor/github.com/docker/docker/pkg/system/stat_openbsd.go

+package system
+
+import (
+	"syscall"
+)
+
+// fromStatT creates a system.StatT type from a syscall.Stat_t type
+func fromStatT(s *syscall.Stat_t) (*StatT, error) {
+	return &StatT{size: s.Size,
+		mode: uint32(s.Mode),
+		uid:  s.Uid,
+		gid:  s.Gid,
+		rdev: uint64(s.Rdev),
+		mtim: s.Mtim}, nil
+}

vendor/github.com/docker/docker/pkg/system/stat_solaris.go

+// +build solaris
+
+package system
+
+import (
+	"syscall"
+)
+
+// fromStatT creates a system.StatT type from a syscall.Stat_t type
+func fromStatT(s *syscall.Stat_t) (*StatT, error) {
+	return &StatT{size: s.Size,
+		mode: uint32(s.Mode),
+		uid:  s.Uid,
+		gid:  s.Gid,
+		rdev: uint64(s.Rdev),
+		mtim: s.Mtim}, nil
+}

vendor/github.com/docker/docker/pkg/system/stat_unsupported.go

+// +build !linux,!windows,!freebsd,!solaris,!openbsd
+
+package system
+
+import (
+	"syscall"
+)
+
+// fromStatT creates a system.StatT type from a syscall.Stat_t type
+func fromStatT(s *syscall.Stat_t) (*StatT, error) {
+	return &StatT{size: s.Size,
+		mode: uint32(s.Mode),
+		uid:  s.Uid,
+		gid:  s.Gid,
+		rdev: uint64(s.Rdev),
+		mtim: s.Mtimespec}, nil
+}

vendor/github.com/docker/docker/pkg/system/stat_windows.go

+// +build windows
+
+package system
+
+import (
+	"os"
+	"time"
+)
+
+// StatT type contains status of a file. It contains metadata
+// like name, permission, size, etc about a file.
+type StatT struct {
+	name    string
+	size    int64
+	mode    os.FileMode
+	modTime time.Time
+	isDir   bool
+}
+
+// Name returns file's name.
+func (s StatT) Name() string {
+	return s.name
+}
+
+// Size returns file's size.
+func (s StatT) Size() int64 {
+	return s.size
+}
+
+// Mode returns file's permission mode.
+func (s StatT) Mode() os.FileMode {
+	return s.mode
+}
+
+// ModTime returns file's last modification time.
+func (s StatT) ModTime() time.Time {
+	return s.modTime
+}
+
+// IsDir returns whether file is actually a directory.
+func (s StatT) IsDir() bool {
+	return s.isDir
+}

vendor/github.com/docker/docker/pkg/system/syscall_unix.go

+// +build linux freebsd
+
+package system
+
+import "syscall"
+
+// Unmount is a platform-specific helper function to call
+// the unmount syscall.
+func Unmount(dest string) error {
+	return syscall.Unmount(dest, 0)
+}
+
+// CommandLineToArgv should not be used on Unix.
+// It simply returns commandLine in the only element in the returned array.
+func CommandLineToArgv(commandLine string) ([]string, error) {
+	return []string{commandLine}, nil
+}

vendor/github.com/docker/docker/pkg/system/syscall_windows.go

+package system
+
+import (
+	"fmt"
+	"syscall"
+	"unsafe"
+)
+
+// OSVersion is a wrapper for Windows version information
+// https://msdn.microsoft.com/en-us/library/windows/desktop/ms724439(v=vs.85).aspx
+type OSVersion struct {
+	Version      uint32
+	MajorVersion uint8
+	MinorVersion uint8
+	Build        uint16
+}
+
+// GetOSVersion gets the operating system version on Windows. Note that
+// docker.exe must be manifested to get the correct version information.
+func GetOSVersion() (OSVersion, error) {
+	var err error
+	osv := OSVersion{}
+	osv.Version, err = syscall.GetVersion()
+	if err != nil {
+		return osv, fmt.Errorf("Failed to call GetVersion()")
+	}
+	osv.MajorVersion = uint8(osv.Version & 0xFF)
+	osv.MinorVersion = uint8(osv.Version >> 8 & 0xFF)
+	osv.Build = uint16(osv.Version >> 16)
+	return osv, nil
+}
+
+// Unmount is a platform-specific helper function to call
+// the unmount syscall. Not supported on Windows
+func Unmount(dest string) error {
+	return nil
+}
+
+// CommandLineToArgv wraps the Windows syscall to turn a commandline into an argument array.
+func CommandLineToArgv(commandLine string) ([]string, error) {
+	var argc int32
+
+	argsPtr, err := syscall.UTF16PtrFromString(commandLine)
+	if err != nil {
+		return nil, err
+	}
+
+	argv, err := syscall.CommandLineToArgv(argsPtr, &argc)
+	if err != nil {
+		return nil, err
+	}
+	defer syscall.LocalFree(syscall.Handle(uintptr(unsafe.Pointer(argv))))
+
+	newArgs := make([]string, argc)
+	for i, v := range (*argv)[:argc] {
+		newArgs[i] = string(syscall.UTF16ToString((*v)[:]))
+	}
+
+	return newArgs, nil
+}

vendor/github.com/docker/docker/pkg/system/umask.go

+// +build !windows
+
+package system
+
+import (
+	"syscall"
+)
+
+// Umask sets current process's file mode creation mask to newmask
+// and return oldmask.
+func Umask(newmask int) (oldmask int, err error) {
+	return syscall.Umask(newmask), nil
+}

vendor/github.com/docker/docker/pkg/system/umask_windows.go

+// +build windows
+
+package system
+
+// Umask is not supported on the windows platform.
+func Umask(newmask int) (oldmask int, err error) {
+	// should not be called on cli code path
+	return 0, ErrNotSupportedPlatform
+}

vendor/github.com/docker/docker/pkg/system/utimes_darwin.go

+package system
+
+import "syscall"
+
+// LUtimesNano is not supported by darwin platform.
+func LUtimesNano(path string, ts []syscall.Timespec) error {
+	return ErrNotSupportedPlatform
+}

vendor/github.com/docker/docker/pkg/system/utimes_freebsd.go

+package system
+
+import (
+	"syscall"
+	"unsafe"
+)
+
+// LUtimesNano is used to change access and modification time of the specified path.
+// It's used for symbol link file because syscall.UtimesNano doesn't support a NOFOLLOW flag atm.
+func LUtimesNano(path string, ts []syscall.Timespec) error {
+	var _path *byte
+	_path, err := syscall.BytePtrFromString(path)
+	if err != nil {
+		return err
+	}
+
+	if _, _, err := syscall.Syscall(syscall.SYS_LUTIMES, uintptr(unsafe.Pointer(_path)), uintptr(unsafe.Pointer(&ts[0])), 0); err != 0 && err != syscall.ENOSYS {
+		return err
+	}
+
+	return nil
+}

vendor/github.com/docker/docker/pkg/system/utimes_linux.go

+package system
+
+import (
+	"syscall"
+	"unsafe"
+)
+
+// LUtimesNano is used to change access and modification time of the specified path.
+// It's used for symbol link file because syscall.UtimesNano doesn't support a NOFOLLOW flag atm.
+func LUtimesNano(path string, ts []syscall.Timespec) error {
+	// These are not currently available in syscall
+	atFdCwd := -100
+	atSymLinkNoFollow := 0x100
+
+	var _path *byte
+	_path, err := syscall.BytePtrFromString(path)
+	if err != nil {
+		return err
+	}
+
+	if _, _, err := syscall.Syscall6(syscall.SYS_UTIMENSAT, uintptr(atFdCwd), uintptr(unsafe.Pointer(_path)), uintptr(unsafe.Pointer(&ts[0])), uintptr(atSymLinkNoFollow), 0, 0); err != 0 && err != syscall.ENOSYS {
+		return err
+	}
+
+	return nil
+}

vendor/github.com/docker/docker/pkg/system/utimes_unsupported.go

+// +build !linux,!freebsd,!darwin
+
+package system
+
+import "syscall"
+
+// LUtimesNano is not supported on platforms other than linux, freebsd and darwin.
+func LUtimesNano(path string, ts []syscall.Timespec) error {
+	return ErrNotSupportedPlatform
+}

vendor/github.com/docker/docker/pkg/system/xattrs_linux.go

+package system
+
+import (
+	"syscall"
+	"unsafe"
+)
+
+// Lgetxattr retrieves the value of the extended attribute identified by attr
+// and associated with the given path in the file system.
+// It will returns a nil slice and nil error if the xattr is not set.
+func Lgetxattr(path string, attr string) ([]byte, error) {
+	pathBytes, err := syscall.BytePtrFromString(path)
+	if err != nil {
+		return nil, err
+	}
+	attrBytes, err := syscall.BytePtrFromString(attr)
+	if err != nil {
+		return nil, err
+	}
+
+	dest := make([]byte, 128)
+	destBytes := unsafe.Pointer(&dest[0])
+	sz, _, errno := syscall.Syscall6(syscall.SYS_LGETXATTR, uintptr(unsafe.Pointer(pathBytes)), uintptr(unsafe.Pointer(attrBytes)), uintptr(destBytes), uintptr(len(dest)), 0, 0)
+	if errno == syscall.ENODATA {
+		return nil, nil
+	}
+	if errno == syscall.ERANGE {
+		dest = make([]byte, sz)
+		destBytes := unsafe.Pointer(&dest[0])
+		sz, _, errno = syscall.Syscall6(syscall.SYS_LGETXATTR, uintptr(unsafe.Pointer(pathBytes)), uintptr(unsafe.Pointer(attrBytes)), uintptr(destBytes), uintptr(len(dest)), 0, 0)
+	}
+	if errno != 0 {
+		return nil, errno
+	}
+
+	return dest[:sz], nil
+}
+
+var _zero uintptr
+
+// Lsetxattr sets the value of the extended attribute identified by attr
+// and associated with the given path in the file system.
+func Lsetxattr(path string, attr string, data []byte, flags int) error {
+	pathBytes, err := syscall.BytePtrFromString(path)
+	if err != nil {
+		return err
+	}
+	attrBytes, err := syscall.BytePtrFromString(attr)
+	if err != nil {
+		return err
+	}
+	var dataBytes unsafe.Pointer
+	if len(data) > 0 {
+		dataBytes = unsafe.Pointer(&data[0])
+	} else {
+		dataBytes = unsafe.Pointer(&_zero)
+	}
+	_, _, errno := syscall.Syscall6(syscall.SYS_LSETXATTR, uintptr(unsafe.Pointer(pathBytes)), uintptr(unsafe.Pointer(attrBytes)), uintptr(dataBytes), uintptr(len(data)), uintptr(flags), 0)
+	if errno != 0 {
+		return errno
+	}
+	return nil
+}

vendor/github.com/docker/docker/pkg/system/xattrs_unsupported.go

+// +build !linux
+
+package system
+
+// Lgetxattr is not supported on platforms other than linux.
+func Lgetxattr(path string, attr string) ([]byte, error) {
+	return nil, ErrNotSupportedPlatform
+}
+
+// Lsetxattr is not supported on platforms other than linux.
+func Lsetxattr(path string, attr string, data []byte, flags int) error {
+	return ErrNotSupportedPlatform
+}

vendor/github.com/docker/docker/pkg/term/ascii.go

+package term
+
+import (
+	"fmt"
+	"strings"
+)
+
+// ASCII list the possible supported ASCII key sequence
+var ASCII = []string{
+	"ctrl-@",
+	"ctrl-a",
+	"ctrl-b",
+	"ctrl-c",
+	"ctrl-d",
+	"ctrl-e",
+	"ctrl-f",
+	"ctrl-g",
+	"ctrl-h",
+	"ctrl-i",
+	"ctrl-j",
+	"ctrl-k",
+	"ctrl-l",
+	"ctrl-m",
+	"ctrl-n",
+	"ctrl-o",
+	"ctrl-p",
+	"ctrl-q",
+	"ctrl-r",
+	"ctrl-s",
+	"ctrl-t",
+	"ctrl-u",
+	"ctrl-v",
+	"ctrl-w",
+	"ctrl-x",
+	"ctrl-y",
+	"ctrl-z",
+	"ctrl-[",
+	"ctrl-\\",
+	"ctrl-]",
+	"ctrl-^",
+	"ctrl-_",
+}
+
+// ToBytes converts a string representing a suite of key-sequence to the corresponding ASCII code.
+func ToBytes(keys string) ([]byte, error) {
+	codes := []byte{}
+next:
+	for _, key := range strings.Split(keys, ",") {
+		if len(key) != 1 {
+			for code, ctrl := range ASCII {
+				if ctrl == key {
+					codes = append(codes, byte(code))
+					continue next
+				}
+			}
+			if key == "DEL" {
+				codes = append(codes, 127)
+			} else {
+				return nil, fmt.Errorf("Unknown character: '%s'", key)
+			}
+		} else {
+			codes = append(codes, byte(key[0]))
+		}
+	}
+	return codes, nil
+}

vendor/github.com/docker/docker/pkg/term/tc_linux_cgo.go

@@ -10,6 +10,9 @@ import (
 // #include <termios.h>
 import "C"
 
+// Termios is the Unix API for terminal I/O.
+// It is passthgrouh for syscall.Termios in order to make it portable with
+// other platforms where it is not available or handled differently.
 type Termios syscall.Termios
 
 // MakeRaw put the terminal connected to the given file descriptor into raw
@@ -24,7 +27,6 @@ func MakeRaw(fd uintptr) (*State, error) {
 	newState := oldState.termios
 
 	C.cfmakeraw((*C.struct_termios)(unsafe.Pointer(&newState)))
-	newState.Oflag = newState.Oflag | C.OPOST
 	if err := tcset(fd, &newState); err != 0 {
 		return nil, err
 	}

vendor/github.com/docker/docker/pkg/term/term.go

 // +build !windows
 
+// Package term provides provides structures and helper functions to work with
+// terminal (state, sizes).
 package term
 
 import (
@@ -12,13 +14,16 @@ import (
 )
 
 var (
+	// ErrInvalidState is returned if the state of the terminal is invalid.
 	ErrInvalidState = errors.New("Invalid terminal state")
 )
 
+// State represents the state of the terminal.
 type State struct {
 	termios Termios
 }
 
+// Winsize represents the size of the terminal window.
 type Winsize struct {
 	Height uint16
 	Width  uint16
@@ -26,10 +31,12 @@ type Winsize struct {
 	y      uint16
 }
 
+// StdStreams returns the standard streams (stdin, stdout, stedrr).
 func StdStreams() (stdIn io.ReadCloser, stdOut, stdErr io.Writer) {
 	return os.Stdin, os.Stdout, os.Stderr
 }
 
+// GetFdInfo returns the file descriptor for an os.File and indicates whether the file represents a terminal.
 func GetFdInfo(in interface{}) (uintptr, bool) {
 	var inFd uintptr
 	var isTerminalIn bool
@@ -40,19 +47,21 @@ func GetFdInfo(in interface{}) (uintptr, bool) {
 	return inFd, isTerminalIn
 }
 
+// GetWinsize returns the window size based on the specified file descriptor.
 func GetWinsize(fd uintptr) (*Winsize, error) {
 	ws := &Winsize{}
 	_, _, err := syscall.Syscall(syscall.SYS_IOCTL, fd, uintptr(syscall.TIOCGWINSZ), uintptr(unsafe.Pointer(ws)))
-	// Skipp errno = 0
+	// Skip errno = 0
 	if err == 0 {
 		return ws, nil
 	}
 	return ws, err
 }
 
+// SetWinsize tries to set the specified window size for the specified file descriptor.
 func SetWinsize(fd uintptr, ws *Winsize) error {
 	_, _, err := syscall.Syscall(syscall.SYS_IOCTL, fd, uintptr(syscall.TIOCSWINSZ), uintptr(unsafe.Pointer(ws)))
-	// Skipp errno = 0
+	// Skip errno = 0
 	if err == 0 {
 		return nil
 	}
@@ -65,8 +74,8 @@ func IsTerminal(fd uintptr) bool {
 	return tcget(fd, &termios) == 0
 }
 
-// Restore restores the terminal connected to the given file descriptor to a
-// previous state.
+// RestoreTerminal restores the terminal connected to the given file descriptor
+// to a previous state.
 func RestoreTerminal(fd uintptr, state *State) error {
 	if state == nil {
 		return ErrInvalidState
@@ -77,6 +86,7 @@ func RestoreTerminal(fd uintptr, state *State) error {
 	return nil
 }
 
+// SaveState saves the state of the terminal connected to the given file descriptor.
 func SaveState(fd uintptr) (*State, error) {
 	var oldState State
 	if err := tcget(fd, &oldState.termios); err != 0 {
@@ -86,6 +96,8 @@ func SaveState(fd uintptr) (*State, error) {
 	return &oldState, nil
 }
 
+// DisableEcho applies the specified state to the terminal connected to the file
+// descriptor, with echo disabled.
 func DisableEcho(fd uintptr, state *State) error {
 	newState := state.termios
 	newState.Lflag &^= syscall.ECHO
@@ -97,6 +109,8 @@ func DisableEcho(fd uintptr, state *State) error {
 	return nil
 }
 
+// SetRawTerminal puts the terminal connected to the given file descriptor into
+// raw mode and returns the previous state.
 func SetRawTerminal(fd uintptr) (*State, error) {
 	oldState, err := MakeRaw(fd)
 	if err != nil {
@@ -113,6 +127,5 @@ func handleInterrupt(fd uintptr, state *State) {
 	go func() {
 		_ = <-sigchan
 		RestoreTerminal(fd, state)
-		os.Exit(0)
 	}()
 }

vendor/github.com/docker/docker/pkg/term/termios_darwin.go

@@ -8,7 +8,10 @@ import (
 const (
 	getTermios = syscall.TIOCGETA
 	setTermios = syscall.TIOCSETA
+)
 
+// Termios magic numbers, passthrough to the ones defined in syscall.
+const (
 	IGNBRK = syscall.IGNBRK
 	PARMRK = syscall.PARMRK
 	INLCR  = syscall.INLCR
@@ -29,6 +32,7 @@ const (
 	IEXTEN = syscall.IEXTEN
 )
 
+// Termios is the Unix API for terminal I/O.
 type Termios struct {
 	Iflag  uint64
 	Oflag  uint64

vendor/github.com/docker/docker/pkg/term/termios_freebsd.go

@@ -8,7 +8,10 @@ import (
 const (
 	getTermios = syscall.TIOCGETA
 	setTermios = syscall.TIOCSETA
+)
 
+// Termios magic numbers, passthrough to the ones defined in syscall.
+const (
 	IGNBRK = syscall.IGNBRK
 	PARMRK = syscall.PARMRK
 	INLCR  = syscall.INLCR
@@ -29,6 +32,7 @@ const (
 	IEXTEN = syscall.IEXTEN
 )
 
+// Termios is the Unix API for terminal I/O.
 type Termios struct {
 	Iflag  uint32
 	Oflag  uint32

vendor/github.com/docker/docker/pkg/term/termios_linux.go

@@ -12,6 +12,7 @@ const (
 	setTermios = syscall.TCSETS
 )
 
+// Termios is the Unix API for terminal I/O.
 type Termios struct {
 	Iflag  uint32
 	Oflag  uint32

vendor/github.com/docker/docker/pkg/term/termios_openbsd.go

+package term
+
+import (
+	"syscall"
+	"unsafe"
+)
+
+const (
+	getTermios = syscall.TIOCGETA
+	setTermios = syscall.TIOCSETA
+)
+
+// Termios magic numbers, passthrough to the ones defined in syscall.
+const (
+	IGNBRK = syscall.IGNBRK
+	PARMRK = syscall.PARMRK
+	INLCR  = syscall.INLCR
+	IGNCR  = syscall.IGNCR
+	ECHONL = syscall.ECHONL
+	CSIZE  = syscall.CSIZE
+	ICRNL  = syscall.ICRNL
+	ISTRIP = syscall.ISTRIP
+	PARENB = syscall.PARENB
+	ECHO   = syscall.ECHO
+	ICANON = syscall.ICANON
+	ISIG   = syscall.ISIG
+	IXON   = syscall.IXON
+	BRKINT = syscall.BRKINT
+	INPCK  = syscall.INPCK
+	OPOST  = syscall.OPOST
+	CS8    = syscall.CS8
+	IEXTEN = syscall.IEXTEN
+)
+
+// Termios is the Unix API for terminal I/O.
+type Termios struct {
+	Iflag  uint32
+	Oflag  uint32
+	Cflag  uint32
+	Lflag  uint32
+	Cc     [20]byte
+	Ispeed uint32
+	Ospeed uint32
+}
+
+// MakeRaw put the terminal connected to the given file descriptor into raw
+// mode and returns the previous state of the terminal so that it can be
+// restored.
+func MakeRaw(fd uintptr) (*State, error) {
+	var oldState State
+	if _, _, err := syscall.Syscall(syscall.SYS_IOCTL, fd, uintptr(getTermios), uintptr(unsafe.Pointer(&oldState.termios))); err != 0 {
+		return nil, err
+	}
+
+	newState := oldState.termios
+	newState.Iflag &^= (IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | IGNCR | ICRNL | IXON)
+	newState.Oflag &^= OPOST
+	newState.Lflag &^= (ECHO | ECHONL | ICANON | ISIG | IEXTEN)
+	newState.Cflag &^= (CSIZE | PARENB)
+	newState.Cflag |= CS8
+	newState.Cc[syscall.VMIN] = 1
+	newState.Cc[syscall.VTIME] = 0
+
+	if _, _, err := syscall.Syscall(syscall.SYS_IOCTL, fd, uintptr(setTermios), uintptr(unsafe.Pointer(&newState))); err != 0 {
+		return nil, err
+	}
+
+	return &oldState, nil
+}

vendor/github.com/docker/docker/pkg/term/winconsole/term_emulator.go

-package winconsole
-
-import (
-	"fmt"
-	"io"
-	"strconv"
-	"strings"
-)
-
-// http://manpages.ubuntu.com/manpages/intrepid/man4/console_codes.4.html
-const (
-	ANSI_ESCAPE_PRIMARY   = 0x1B
-	ANSI_ESCAPE_SECONDARY = 0x5B
-	ANSI_COMMAND_FIRST    = 0x40
-	ANSI_COMMAND_LAST     = 0x7E
-	ANSI_PARAMETER_SEP    = ";"
-	ANSI_CMD_G0           = '('
-	ANSI_CMD_G1           = ')'
-	ANSI_CMD_G2           = '*'
-	ANSI_CMD_G3           = '+'
-	ANSI_CMD_DECPNM       = '>'
-	ANSI_CMD_DECPAM       = '='
-	ANSI_CMD_OSC          = ']'
-	ANSI_CMD_STR_TERM     = '\\'
-	ANSI_BEL              = 0x07
-	KEY_EVENT             = 1
-)
-
-// Interface that implements terminal handling
-type terminalEmulator interface {
-	HandleOutputCommand(fd uintptr, command []byte) (n int, err error)
-	HandleInputSequence(fd uintptr, command []byte) (n int, err error)
-	WriteChars(fd uintptr, w io.Writer, p []byte) (n int, err error)
-	ReadChars(fd uintptr, w io.Reader, p []byte) (n int, err error)
-}
-
-type terminalWriter struct {
-	wrappedWriter io.Writer
-	emulator      terminalEmulator
-	command       []byte
-	inSequence    bool
-	fd            uintptr
-}
-
-type terminalReader struct {
-	wrappedReader io.ReadCloser
-	emulator      terminalEmulator
-	command       []byte
-	inSequence    bool
-	fd            uintptr
-}
-
-// http://manpages.ubuntu.com/manpages/intrepid/man4/console_codes.4.html
-func isAnsiCommandChar(b byte) bool {
-	switch {
-	case ANSI_COMMAND_FIRST <= b && b <= ANSI_COMMAND_LAST && b != ANSI_ESCAPE_SECONDARY:
-		return true
-	case b == ANSI_CMD_G1 || b == ANSI_CMD_OSC || b == ANSI_CMD_DECPAM || b == ANSI_CMD_DECPNM:
-		// non-CSI escape sequence terminator
-		return true
-	case b == ANSI_CMD_STR_TERM || b == ANSI_BEL:
-		// String escape sequence terminator
-		return true
-	}
-	return false
-}
-
-func isCharacterSelectionCmdChar(b byte) bool {
-	return (b == ANSI_CMD_G0 || b == ANSI_CMD_G1 || b == ANSI_CMD_G2 || b == ANSI_CMD_G3)
-}
-
-func isXtermOscSequence(command []byte, current byte) bool {
-	return (len(command) >= 2 && command[0] == ANSI_ESCAPE_PRIMARY && command[1] == ANSI_CMD_OSC && current != ANSI_BEL)
-}
-
-// Write writes len(p) bytes from p to the underlying data stream.
-// http://golang.org/pkg/io/#Writer
-func (tw *terminalWriter) Write(p []byte) (n int, err error) {
-	if len(p) == 0 {
-		return 0, nil
-	}
-	if tw.emulator == nil {
-		return tw.wrappedWriter.Write(p)
-	}
-	// Emulate terminal by extracting commands and executing them
-	totalWritten := 0
-	start := 0 // indicates start of the next chunk
-	end := len(p)
-	for current := 0; current < end; current++ {
-		if tw.inSequence {
-			// inside escape sequence
-			tw.command = append(tw.command, p[current])
-			if isAnsiCommandChar(p[current]) {
-				if !isXtermOscSequence(tw.command, p[current]) {
-					// found the last command character.
-					// Now we have a complete command.
-					nchar, err := tw.emulator.HandleOutputCommand(tw.fd, tw.command)
-					totalWritten += nchar
-					if err != nil {
-						return totalWritten, err
-					}
-
-					// clear the command
-					// don't include current character again
-					tw.command = tw.command[:0]
-					start = current + 1
-					tw.inSequence = false
-				}
-			}
-		} else {
-			if p[current] == ANSI_ESCAPE_PRIMARY {
-				// entering escape sequnce
-				tw.inSequence = true
-				// indicates end of "normal sequence", write whatever you have so far
-				if len(p[start:current]) > 0 {
-					nw, err := tw.emulator.WriteChars(tw.fd, tw.wrappedWriter, p[start:current])
-					totalWritten += nw
-					if err != nil {
-						return totalWritten, err
-					}
-				}
-				// include the current character as part of the next sequence
-				tw.command = append(tw.command, p[current])
-			}
-		}
-	}
-	// note that so far, start of the escape sequence triggers writing out of bytes to console.
-	// For the part _after_ the end of last escape sequence, it is not written out yet. So write it out
-	if !tw.inSequence {
-		// assumption is that we can't be inside sequence and therefore command should be empty
-		if len(p[start:]) > 0 {
-			nw, err := tw.emulator.WriteChars(tw.fd, tw.wrappedWriter, p[start:])
-			totalWritten += nw
-			if err != nil {
-				return totalWritten, err
-			}
-		}
-	}
-	return totalWritten, nil
-
-}
-
-// Read reads up to len(p) bytes into p.
-// http://golang.org/pkg/io/#Reader
-func (tr *terminalReader) Read(p []byte) (n int, err error) {
-	//Implementations of Read are discouraged from returning a zero byte count
-	// with a nil error, except when len(p) == 0.
-	if len(p) == 0 {
-		return 0, nil
-	}
-	if nil == tr.emulator {
-		return tr.readFromWrappedReader(p)
-	}
-	return tr.emulator.ReadChars(tr.fd, tr.wrappedReader, p)
-}
-
-// Close the underlying stream
-func (tr *terminalReader) Close() (err error) {
-	return tr.wrappedReader.Close()
-}
-
-func (tr *terminalReader) readFromWrappedReader(p []byte) (n int, err error) {
-	return tr.wrappedReader.Read(p)
-}
-
-type ansiCommand struct {
-	CommandBytes []byte
-	Command      string
-	Parameters   []string
-	IsSpecial    bool
-}
-
-func parseAnsiCommand(command []byte) *ansiCommand {
-	if isCharacterSelectionCmdChar(command[1]) {
-		// Is Character Set Selection commands
-		return &ansiCommand{
-			CommandBytes: command,
-			Command:      string(command),
-			IsSpecial:    true,
-		}
-	}
-	// last char is command character
-	lastCharIndex := len(command) - 1
-
-	retValue := &ansiCommand{
-		CommandBytes: command,
-		Command:      string(command[lastCharIndex]),
-		IsSpecial:    false,
-	}
-	// more than a single escape
-	if lastCharIndex != 0 {
-		start := 1
-		// skip if double char escape sequence
-		if command[0] == ANSI_ESCAPE_PRIMARY && command[1] == ANSI_ESCAPE_SECONDARY {
-			start++
-		}
-		// convert this to GetNextParam method
-		retValue.Parameters = strings.Split(string(command[start:lastCharIndex]), ANSI_PARAMETER_SEP)
-	}
-	return retValue
-}
-
-func (c *ansiCommand) getParam(index int) string {
-	if len(c.Parameters) > index {
-		return c.Parameters[index]
-	}
-	return ""
-}
-
-func (ac *ansiCommand) String() string {
-	return fmt.Sprintf("0x%v \"%v\" (\"%v\")",
-		bytesToHex(ac.CommandBytes),
-		ac.Command,
-		strings.Join(ac.Parameters, "\",\""))
-}
-
-func bytesToHex(b []byte) string {
-	hex := make([]string, len(b))
-	for i, ch := range b {
-		hex[i] = fmt.Sprintf("%X", ch)
-	}
-	return strings.Join(hex, "")
-}
-
-func parseInt16OrDefault(s string, defaultValue int16) (n int16, err error) {
-	if s == "" {
-		return defaultValue, nil
-	}
-	parsedValue, err := strconv.ParseInt(s, 10, 16)
-	if err != nil {
-		return defaultValue, err
-	}
-	return int16(parsedValue), nil
-}

vendor/github.com/docker/docker/pkg/term/windows/ansi_reader.go

+// +build windows
+
+package windows
+
+import (
+	"bytes"
+	"errors"
+	"fmt"
+	"os"
+	"strings"
+	"unsafe"
+
+	ansiterm "github.com/Azure/go-ansiterm"
+	"github.com/Azure/go-ansiterm/winterm"
+)
+
+const (
+	escapeSequence = ansiterm.KEY_ESC_CSI
+)
+
+// ansiReader wraps a standard input file (e.g., os.Stdin) providing ANSI sequence translation.
+type ansiReader struct {
+	file     *os.File
+	fd       uintptr
+	buffer   []byte
+	cbBuffer int
+	command  []byte
+}
+
+func newAnsiReader(nFile int) *ansiReader {
+	file, fd := winterm.GetStdFile(nFile)
+	return &ansiReader{
+		file:    file,
+		fd:      fd,
+		command: make([]byte, 0, ansiterm.ANSI_MAX_CMD_LENGTH),
+		buffer:  make([]byte, 0),
+	}
+}
+
+// Close closes the wrapped file.
+func (ar *ansiReader) Close() (err error) {
+	return ar.file.Close()
+}
+
+// Fd returns the file descriptor of the wrapped file.
+func (ar *ansiReader) Fd() uintptr {
+	return ar.fd
+}
+
+// Read reads up to len(p) bytes of translated input events into p.
+func (ar *ansiReader) Read(p []byte) (int, error) {
+	if len(p) == 0 {
+		return 0, nil
+	}
+
+	// Previously read bytes exist, read as much as we can and return
+	if len(ar.buffer) > 0 {
+		logger.Debugf("Reading previously cached bytes")
+
+		originalLength := len(ar.buffer)
+		copiedLength := copy(p, ar.buffer)
+
+		if copiedLength == originalLength {
+			ar.buffer = make([]byte, 0, len(p))
+		} else {
+			ar.buffer = ar.buffer[copiedLength:]
+		}
+
+		logger.Debugf("Read from cache p[%d]: % x", copiedLength, p)
+		return copiedLength, nil
+	}
+
+	// Read and translate key events
+	events, err := readInputEvents(ar.fd, len(p))
+	if err != nil {
+		return 0, err
+	} else if len(events) == 0 {
+		logger.Debug("No input events detected")
+		return 0, nil
+	}
+
+	keyBytes := translateKeyEvents(events, []byte(escapeSequence))
+
+	// Save excess bytes and right-size keyBytes
+	if len(keyBytes) > len(p) {
+		logger.Debugf("Received %d keyBytes, only room for %d bytes", len(keyBytes), len(p))
+		ar.buffer = keyBytes[len(p):]
+		keyBytes = keyBytes[:len(p)]
+	} else if len(keyBytes) == 0 {
+		logger.Debug("No key bytes returned from the translator")
+		return 0, nil
+	}
+
+	copiedLength := copy(p, keyBytes)
+	if copiedLength != len(keyBytes) {
+		return 0, errors.New("Unexpected copy length encountered.")
+	}
+
+	logger.Debugf("Read        p[%d]: % x", copiedLength, p)
+	logger.Debugf("Read keyBytes[%d]: % x", copiedLength, keyBytes)
+	return copiedLength, nil
+}
+
+// readInputEvents polls until at least one event is available.
+func readInputEvents(fd uintptr, maxBytes int) ([]winterm.INPUT_RECORD, error) {
+	// Determine the maximum number of records to retrieve
+	// -- Cast around the type system to obtain the size of a single INPUT_RECORD.
+	//    unsafe.Sizeof requires an expression vs. a type-reference; the casting
+	//    tricks the type system into believing it has such an expression.
+	recordSize := int(unsafe.Sizeof(*((*winterm.INPUT_RECORD)(unsafe.Pointer(&maxBytes)))))
+	countRecords := maxBytes / recordSize
+	if countRecords > ansiterm.MAX_INPUT_EVENTS {
+		countRecords = ansiterm.MAX_INPUT_EVENTS
+	}
+	logger.Debugf("[windows] readInputEvents: Reading %v records (buffer size %v, record size %v)", countRecords, maxBytes, recordSize)
+
+	// Wait for and read input events
+	events := make([]winterm.INPUT_RECORD, countRecords)
+	nEvents := uint32(0)
+	eventsExist, err := winterm.WaitForSingleObject(fd, winterm.WAIT_INFINITE)
+	if err != nil {
+		return nil, err
+	}
+
+	if eventsExist {
+		err = winterm.ReadConsoleInput(fd, events, &nEvents)
+		if err != nil {
+			return nil, err
+		}
+	}
+
+	// Return a slice restricted to the number of returned records
+	logger.Debugf("[windows] readInputEvents: Read %v events", nEvents)
+	return events[:nEvents], nil
+}
+
+// KeyEvent Translation Helpers
+
+var arrowKeyMapPrefix = map[winterm.WORD]string{
+	winterm.VK_UP:    "%s%sA",
+	winterm.VK_DOWN:  "%s%sB",
+	winterm.VK_RIGHT: "%s%sC",
+	winterm.VK_LEFT:  "%s%sD",
+}
+
+var keyMapPrefix = map[winterm.WORD]string{
+	winterm.VK_UP:     "\x1B[%sA",
+	winterm.VK_DOWN:   "\x1B[%sB",
+	winterm.VK_RIGHT:  "\x1B[%sC",
+	winterm.VK_LEFT:   "\x1B[%sD",
+	winterm.VK_HOME:   "\x1B[1%s~", // showkey shows ^[[1
+	winterm.VK_END:    "\x1B[4%s~", // showkey shows ^[[4
+	winterm.VK_INSERT: "\x1B[2%s~",
+	winterm.VK_DELETE: "\x1B[3%s~",
+	winterm.VK_PRIOR:  "\x1B[5%s~",
+	winterm.VK_NEXT:   "\x1B[6%s~",
+	winterm.VK_F1:     "",
+	winterm.VK_F2:     "",
+	winterm.VK_F3:     "\x1B[13%s~",
+	winterm.VK_F4:     "\x1B[14%s~",
+	winterm.VK_F5:     "\x1B[15%s~",
+	winterm.VK_F6:     "\x1B[17%s~",
+	winterm.VK_F7:     "\x1B[18%s~",
+	winterm.VK_F8:     "\x1B[19%s~",
+	winterm.VK_F9:     "\x1B[20%s~",
+	winterm.VK_F10:    "\x1B[21%s~",
+	winterm.VK_F11:    "\x1B[23%s~",
+	winterm.VK_F12:    "\x1B[24%s~",
+}
+
+// translateKeyEvents converts the input events into the appropriate ANSI string.
+func translateKeyEvents(events []winterm.INPUT_RECORD, escapeSequence []byte) []byte {
+	var buffer bytes.Buffer
+	for _, event := range events {
+		if event.EventType == winterm.KEY_EVENT && event.KeyEvent.KeyDown != 0 {
+			buffer.WriteString(keyToString(&event.KeyEvent, escapeSequence))
+		}
+	}
+
+	return buffer.Bytes()
+}
+
+// keyToString maps the given input event record to the corresponding string.
+func keyToString(keyEvent *winterm.KEY_EVENT_RECORD, escapeSequence []byte) string {
+	if keyEvent.UnicodeChar == 0 {
+		return formatVirtualKey(keyEvent.VirtualKeyCode, keyEvent.ControlKeyState, escapeSequence)
+	}
+
+	_, alt, control := getControlKeys(keyEvent.ControlKeyState)
+	if control {
+		// TODO(azlinux): Implement following control sequences
+		// <Ctrl>-D  Signals the end of input from the keyboard; also exits current shell.
+		// <Ctrl>-H  Deletes the first character to the left of the cursor. Also called the ERASE key.
+		// <Ctrl>-Q  Restarts printing after it has been stopped with <Ctrl>-s.
+		// <Ctrl>-S  Suspends printing on the screen (does not stop the program).
+		// <Ctrl>-U  Deletes all characters on the current line. Also called the KILL key.
+		// <Ctrl>-E  Quits current command and creates a core
+
+	}
+
+	// <Alt>+Key generates ESC N Key
+	if !control && alt {
+		return ansiterm.KEY_ESC_N + strings.ToLower(string(keyEvent.UnicodeChar))
+	}
+
+	return string(keyEvent.UnicodeChar)
+}
+
+// formatVirtualKey converts a virtual key (e.g., up arrow) into the appropriate ANSI string.
+func formatVirtualKey(key winterm.WORD, controlState winterm.DWORD, escapeSequence []byte) string {
+	shift, alt, control := getControlKeys(controlState)
+	modifier := getControlKeysModifier(shift, alt, control)
+
+	if format, ok := arrowKeyMapPrefix[key]; ok {
+		return fmt.Sprintf(format, escapeSequence, modifier)
+	}
+
+	if format, ok := keyMapPrefix[key]; ok {
+		return fmt.Sprintf(format, modifier)
+	}
+
+	return ""
+}
+
+// getControlKeys extracts the shift, alt, and ctrl key states.
+func getControlKeys(controlState winterm.DWORD) (shift, alt, control bool) {
+	shift = 0 != (controlState & winterm.SHIFT_PRESSED)
+	alt = 0 != (controlState & (winterm.LEFT_ALT_PRESSED | winterm.RIGHT_ALT_PRESSED))
+	control = 0 != (controlState & (winterm.LEFT_CTRL_PRESSED | winterm.RIGHT_CTRL_PRESSED))
+	return shift, alt, control
+}
+
+// getControlKeysModifier returns the ANSI modifier for the given combination of control keys.
+func getControlKeysModifier(shift, alt, control bool) string {
+	if shift && alt && control {
+		return ansiterm.KEY_CONTROL_PARAM_8
+	}
+	if alt && control {
+		return ansiterm.KEY_CONTROL_PARAM_7
+	}
+	if shift && control {
+		return ansiterm.KEY_CONTROL_PARAM_6
+	}
+	if control {
+		return ansiterm.KEY_CONTROL_PARAM_5
+	}
+	if shift && alt {
+		return ansiterm.KEY_CONTROL_PARAM_4
+	}
+	if alt {
+		return ansiterm.KEY_CONTROL_PARAM_3
+	}
+	if shift {
+		return ansiterm.KEY_CONTROL_PARAM_2
+	}
+	return ""
+}

vendor/github.com/docker/docker/pkg/term/windows/ansi_writer.go

+// +build windows
+
+package windows
+
+import (
+	"io/ioutil"
+	"os"
+
+	ansiterm "github.com/Azure/go-ansiterm"
+	"github.com/Azure/go-ansiterm/winterm"
+	"github.com/Sirupsen/logrus"
+)
+
+var logger *logrus.Logger
+
+// ansiWriter wraps a standard output file (e.g., os.Stdout) providing ANSI sequence translation.
+type ansiWriter struct {
+	file           *os.File
+	fd             uintptr
+	infoReset      *winterm.CONSOLE_SCREEN_BUFFER_INFO
+	command        []byte
+	escapeSequence []byte
+	inAnsiSequence bool
+	parser         *ansiterm.AnsiParser
+}
+
+func newAnsiWriter(nFile int) *ansiWriter {
+	logFile := ioutil.Discard
+
+	if isDebugEnv := os.Getenv(ansiterm.LogEnv); isDebugEnv == "1" {
+		logFile, _ = os.Create("ansiReaderWriter.log")
+	}
+
+	logger = &logrus.Logger{
+		Out:       logFile,
+		Formatter: new(logrus.TextFormatter),
+		Level:     logrus.DebugLevel,
+	}
+
+	file, fd := winterm.GetStdFile(nFile)
+	info, err := winterm.GetConsoleScreenBufferInfo(fd)
+	if err != nil {
+		return nil
+	}
+
+	parser := ansiterm.CreateParser("Ground", winterm.CreateWinEventHandler(fd, file))
+	logger.Infof("newAnsiWriter: parser %p", parser)
+
+	aw := &ansiWriter{
+		file:           file,
+		fd:             fd,
+		infoReset:      info,
+		command:        make([]byte, 0, ansiterm.ANSI_MAX_CMD_LENGTH),
+		escapeSequence: []byte(ansiterm.KEY_ESC_CSI),
+		parser:         parser,
+	}
+
+	logger.Infof("newAnsiWriter: aw.parser %p", aw.parser)
+	logger.Infof("newAnsiWriter: %v", aw)
+	return aw
+}
+
+func (aw *ansiWriter) Fd() uintptr {
+	return aw.fd
+}
+
+// Write writes len(p) bytes from p to the underlying data stream.
+func (aw *ansiWriter) Write(p []byte) (total int, err error) {
+	if len(p) == 0 {
+		return 0, nil
+	}
+
+	logger.Infof("Write: % x", p)
+	logger.Infof("Write: %s", string(p))
+	return aw.parser.Parse(p)
+}

vendor/github.com/docker/docker/pkg/term/windows/console.go

+// +build windows
+
+package windows
+
+import (
+	"io"
+	"os"
+	"syscall"
+
+	"github.com/Azure/go-ansiterm/winterm"
+
+	ansiterm "github.com/Azure/go-ansiterm"
+	"github.com/Sirupsen/logrus"
+	"io/ioutil"
+)
+
+// ConEmuStreams returns prepared versions of console streams,
+// for proper use in ConEmu terminal.
+// The ConEmu terminal emulates ANSI on output streams well by default.
+func ConEmuStreams() (stdIn io.ReadCloser, stdOut, stdErr io.Writer) {
+	if IsConsole(os.Stdin.Fd()) {
+		stdIn = newAnsiReader(syscall.STD_INPUT_HANDLE)
+	} else {
+		stdIn = os.Stdin
+	}
+
+	stdOut = os.Stdout
+	stdErr = os.Stderr
+
+	// WARNING (BEGIN): sourced from newAnsiWriter
+
+	logFile := ioutil.Discard
+
+	if isDebugEnv := os.Getenv(ansiterm.LogEnv); isDebugEnv == "1" {
+		logFile, _ = os.Create("ansiReaderWriter.log")
+	}
+
+	logger = &logrus.Logger{
+		Out:       logFile,
+		Formatter: new(logrus.TextFormatter),
+		Level:     logrus.DebugLevel,
+	}
+
+	// WARNING (END): sourced from newAnsiWriter
+
+	return stdIn, stdOut, stdErr
+}
+
+// ConsoleStreams returns a wrapped version for each standard stream referencing a console,
+// that handles ANSI character sequences.
+func ConsoleStreams() (stdIn io.ReadCloser, stdOut, stdErr io.Writer) {
+	if IsConsole(os.Stdin.Fd()) {
+		stdIn = newAnsiReader(syscall.STD_INPUT_HANDLE)
+	} else {
+		stdIn = os.Stdin
+	}
+
+	if IsConsole(os.Stdout.Fd()) {
+		stdOut = newAnsiWriter(syscall.STD_OUTPUT_HANDLE)
+	} else {
+		stdOut = os.Stdout
+	}
+
+	if IsConsole(os.Stderr.Fd()) {
+		stdErr = newAnsiWriter(syscall.STD_ERROR_HANDLE)
+	} else {
+		stdErr = os.Stderr
+	}
+
+	return stdIn, stdOut, stdErr
+}
+
+// GetHandleInfo returns file descriptor and bool indicating whether the file is a console.
+func GetHandleInfo(in interface{}) (uintptr, bool) {
+	switch t := in.(type) {
+	case *ansiReader:
+		return t.Fd(), true
+	case *ansiWriter:
+		return t.Fd(), true
+	}
+
+	var inFd uintptr
+	var isTerminal bool
+
+	if file, ok := in.(*os.File); ok {
+		inFd = file.Fd()
+		isTerminal = IsConsole(inFd)
+	}
+	return inFd, isTerminal
+}
+
+// IsConsole returns true if the given file descriptor is a Windows Console.
+// The code assumes that GetConsoleMode will return an error for file descriptors that are not a console.
+func IsConsole(fd uintptr) bool {
+	_, e := winterm.GetConsoleMode(fd)
+	return e == nil
+}

vendor/github.com/docker/docker/pkg/term/windows/windows.go

+// These files implement ANSI-aware input and output streams for use by the Docker Windows client.
+// When asked for the set of standard streams (e.g., stdin, stdout, stderr), the code will create
+// and return pseudo-streams that convert ANSI sequences to / from Windows Console API calls.
+
+package windows

vendor/github.com/docker/docker/pkg/timeutils/utils.go

-package timeutils
-
-import (
-	"strconv"
-	"strings"
-	"time"
-)
-
-// GetTimestamp tries to parse given string as golang duration,
-// then RFC3339 time and finally as a Unix timestamp. If
-// any of these were successful, it returns a Unix timestamp
-// as string otherwise returns the given value back.
-// In case of duration input, the returned timestamp is computed
-// as the given reference time minus the amount of the duration.
-func GetTimestamp(value string, reference time.Time) string {
-	if d, err := time.ParseDuration(value); value != "0" && err == nil {
-		return strconv.FormatInt(reference.Add(-d).Unix(), 10)
-	}
-
-	var format string
-	if strings.Contains(value, ".") {
-		format = time.RFC3339Nano
-	} else {
-		format = time.RFC3339
-	}
-
-	loc := time.FixedZone(time.Now().Zone())
-	if len(value) < len(format) {
-		format = format[:len(value)]
-	}
-	t, err := time.ParseInLocation(format, value, loc)
-	if err != nil {
-		return value
-	}
-	return strconv.FormatInt(t.Unix(), 10)
-}

vendor/github.com/docker/docker/pkg/units/duration.go

-package units
-
-import (
-	"fmt"
-	"time"
-)
-
-// HumanDuration returns a human-readable approximation of a duration
-// (eg. "About a minute", "4 hours ago", etc.)
-func HumanDuration(d time.Duration) string {
-	if seconds := int(d.Seconds()); seconds < 1 {
-		return "Less than a second"
-	} else if seconds < 60 {
-		return fmt.Sprintf("%d seconds", seconds)
-	} else if minutes := int(d.Minutes()); minutes == 1 {
-		return "About a minute"
-	} else if minutes < 60 {
-		return fmt.Sprintf("%d minutes", minutes)
-	} else if hours := int(d.Hours()); hours == 1 {
-		return "About an hour"
-	} else if hours < 48 {
-		return fmt.Sprintf("%d hours", hours)
-	} else if hours < 24*7*2 {
-		return fmt.Sprintf("%d days", hours/24)
-	} else if hours < 24*30*3 {
-		return fmt.Sprintf("%d weeks", hours/24/7)
-	} else if hours < 24*365*2 {
-		return fmt.Sprintf("%d months", hours/24/30)
-	}
-	return fmt.Sprintf("%d years", int(d.Hours())/24/365)
-}

vendor/github.com/docker/docker/pkg/units/size.go

-package units
-
-import (
-	"fmt"
-	"regexp"
-	"strconv"
-	"strings"
-)
-
-// See: http://en.wikipedia.org/wiki/Binary_prefix
-const (
-	// Decimal
-
-	KB = 1000
-	MB = 1000 * KB
-	GB = 1000 * MB
-	TB = 1000 * GB
-	PB = 1000 * TB
-
-	// Binary
-
-	KiB = 1024
-	MiB = 1024 * KiB
-	GiB = 1024 * MiB
-	TiB = 1024 * GiB
-	PiB = 1024 * TiB
-)
-
-type unitMap map[string]int64
-
-var (
-	decimalMap = unitMap{"k": KB, "m": MB, "g": GB, "t": TB, "p": PB}
-	binaryMap  = unitMap{"k": KiB, "m": MiB, "g": GiB, "t": TiB, "p": PiB}
-	sizeRegex  = regexp.MustCompile(`^(\d+)([kKmMgGtTpP])?[bB]?$`)
-)
-
-var decimapAbbrs = []string{"B", "kB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB"}
-var binaryAbbrs = []string{"B", "KiB", "MiB", "GiB", "TiB", "PiB", "EiB", "ZiB", "YiB"}
-
-// CustomSize returns a human-readable approximation of a size
-// using custom format
-func CustomSize(format string, size float64, base float64, _map []string) string {
-	i := 0
-	for size >= base {
-		size = size / base
-		i++
-	}
-	return fmt.Sprintf(format, size, _map[i])
-}
-
-// HumanSize returns a human-readable approximation of a size
-// using SI standard (eg. "44kB", "17MB")
-func HumanSize(size float64) string {
-	return CustomSize("%.4g %s", size, 1000.0, decimapAbbrs)
-}
-
-func BytesSize(size float64) string {
-	return CustomSize("%.4g %s", size, 1024.0, binaryAbbrs)
-}
-
-// FromHumanSize returns an integer from a human-readable specification of a
-// size using SI standard (eg. "44kB", "17MB")
-func FromHumanSize(size string) (int64, error) {
-	return parseSize(size, decimalMap)
-}
-
-// RAMInBytes parses a human-readable string representing an amount of RAM
-// in bytes, kibibytes, mebibytes, gibibytes, or tebibytes and
-// returns the number of bytes, or -1 if the string is unparseable.
-// Units are case-insensitive, and the 'b' suffix is optional.
-func RAMInBytes(size string) (int64, error) {
-	return parseSize(size, binaryMap)
-}
-
-// Parses the human-readable size string into the amount it represents
-func parseSize(sizeStr string, uMap unitMap) (int64, error) {
-	matches := sizeRegex.FindStringSubmatch(sizeStr)
-	if len(matches) != 3 {
-		return -1, fmt.Errorf("invalid size: '%s'", sizeStr)
-	}
-
-	size, err := strconv.ParseInt(matches[1], 10, 0)
-	if err != nil {
-		return -1, err
-	}
-
-	unitPrefix := strings.ToLower(matches[2])
-	if mul, ok := uMap[unitPrefix]; ok {
-		size *= mul
-	}
-
-	return size, nil
-}