Makes cluster/gce/ubuntu to be a symlink to cluster/gce/gci and changes the…

cluster/common.sh

 #!/bin/bash
 
-# Copyright 2015 The Kubernetes Authors.
+# Copyright 2017 The Kubernetes Authors.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.

cluster/gce/gci/master.yaml

@@ -112,6 +112,9 @@ write_files:
       [Unit]
       Description=Kubernetes
 
+      [Install]
+      WantedBy=multi-user.target
+
 runcmd:
  - systemctl daemon-reload
  - systemctl enable kube-master-installation.service
@@ -120,4 +123,5 @@ runcmd:
  - systemctl enable kubelet-monitor.service
  - systemctl enable kube-logrotate.timer
  - systemctl enable kube-logrotate.service
+ - systemctl enable kubernetes.target
  - systemctl start kubernetes.target

cluster/gce/gci/node.yaml

@@ -112,6 +112,9 @@ write_files:
       [Unit]
       Description=Kubernetes
 
+      [Install]
+      WantedBy=multi-user.target
+
 runcmd:
  - systemctl daemon-reload
  - systemctl enable kube-node-installation.service
@@ -120,4 +123,5 @@ runcmd:
  - systemctl enable kubelet-monitor.service
  - systemctl enable kube-logrotate.timer
  - systemctl enable kube-logrotate.service
+ - systemctl enable kubernetes.target
  - systemctl start kubernetes.target

cluster/gce/ubuntu

+gci
\ No newline at end of file

cluster/gce/ubuntu/README.md

-# Ubuntu Image
-
-The Ubuntu GKE image is an image optimized to run Kubernetes on the Google
-Cloud Platform.
-
-The image is currently made to behave as much as possible like the GCI image,
-but since it uses "real" systemd (instead of upstart with a delegate), the systemd
-targets need to be changed slightly to ensure services are always started on
-boot.
-
-In practice this means that for now the only changes are in master.yaml and node.yaml,
-as well as their injection points in node-helper.sh and master-helper.sh.

cluster/gce/ubuntu/master-helper.sh

-#!/bin/bash
-
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# A library of helper functions and constant for GCI distro
-source "${KUBE_ROOT}/cluster/gce/gci/helper.sh"
-
-# create-master-instance creates the master instance. If called with
-# an argument, the argument is used as the name to a reserved IP
-# address for the master. (In the case of upgrade/repair, we re-use
-# the same IP.)
-#
-# It requires a whole slew of assumed variables, partially due to to
-# the call to write-master-env. Listing them would be rather
-# futile. Instead, we list the required calls to ensure any additional
-#
-# variables are set:
-#   ensure-temp-dir
-#   detect-project
-#   get-bearer-token
-function create-master-instance {
-  local address_opt=""
-  [[ -n ${1:-} ]] && address_opt="--address ${1}"
-
-  write-master-env
-  ensure-gci-metadata-files
-  create-master-instance-internal "${MASTER_NAME}" "${address_opt}"
-}
-
-function replicate-master-instance() {
-  local existing_master_zone="${1}"
-  local existing_master_name="${2}"
-  local existing_master_replicas="${3}"
-
-  local kube_env="$(get-metadata "${existing_master_zone}" "${existing_master_name}" kube-env)"
-  # Substitute INITIAL_ETCD_CLUSTER to enable etcd clustering.
-  kube_env="$(echo "${kube_env}" | grep -v "INITIAL_ETCD_CLUSTER")"
-  kube_env="$(echo -e "${kube_env}\nINITIAL_ETCD_CLUSTER: '${existing_master_replicas},${REPLICA_NAME}'")"
-
-  # Substitute INITIAL_ETCD_CLUSTER_STATE
-  kube_env="$(echo "${kube_env}" | grep -v "INITIAL_ETCD_CLUSTER_STATE")"
-  kube_env="$(echo -e "${kube_env}\nINITIAL_ETCD_CLUSTER_STATE: 'existing'")"
-
-  ETCD_CA_KEY="$(echo "${kube_env}" | grep "ETCD_CA_KEY" |  sed "s/^.*: '//" | sed "s/'$//")"
-  ETCD_CA_CERT="$(echo "${kube_env}" | grep "ETCD_CA_CERT" |  sed "s/^.*: '//" | sed "s/'$//")"
-  create-etcd-certs "${REPLICA_NAME}" "${ETCD_CA_CERT}" "${ETCD_CA_KEY}"
-
-  kube_env="$(echo "${kube_env}" | grep -v "ETCD_PEER_KEY")"
-  kube_env="$(echo -e "${kube_env}\nETCD_PEER_KEY: '${ETCD_PEER_KEY_BASE64}'")"
-  kube_env="$(echo "${kube_env}" | grep -v "ETCD_PEER_CERT")"
-  kube_env="$(echo -e "${kube_env}\nETCD_PEER_CERT: '${ETCD_PEER_CERT_BASE64}'")"
-
-  echo "${kube_env}" > ${KUBE_TEMP}/master-kube-env.yaml
-  get-metadata "${existing_master_zone}" "${existing_master_name}" cluster-name > "${KUBE_TEMP}/cluster-name.txt"
-  get-metadata "${existing_master_zone}" "${existing_master_name}" gci-update-strategy > "${KUBE_TEMP}/gci-update.txt"
-  get-metadata "${existing_master_zone}" "${existing_master_name}" gci-ensure-gke-docker > "${KUBE_TEMP}/gci-ensure-gke-docker.txt"
-  get-metadata "${existing_master_zone}" "${existing_master_name}" gci-docker-version > "${KUBE_TEMP}/gci-docker-version.txt"
-  get-metadata "${existing_master_zone}" "${existing_master_name}" kube-master-certs > "${KUBE_TEMP}/kube-master-certs.yaml"
-
-  create-master-instance-internal "${REPLICA_NAME}"
-}
-
-
-function create-master-instance-internal() {
-  local -r master_name="${1}"
-  local -r address_option="${2:-}"
-
-  local preemptible_master=""
-  if [[ "${PREEMPTIBLE_MASTER:-}" == "true" ]]; then
-    preemptible_master="--preemptible --maintenance-policy TERMINATE"
-  fi
-
-  gcloud compute instances create "${master_name}" \
-    ${address_option} \
-    --project "${PROJECT}" \
-    --zone "${ZONE}" \
-    --machine-type "${MASTER_SIZE}" \
-    --image-project="${MASTER_IMAGE_PROJECT}" \
-    --image "${MASTER_IMAGE}" \
-    --tags "${MASTER_TAG}" \
-    --network "${NETWORK}" \
-    --scopes "storage-ro,compute-rw,monitoring,logging-write" \
-    --can-ip-forward \
-    --metadata-from-file \
-      "kube-env=${KUBE_TEMP}/master-kube-env.yaml,user-data=${KUBE_ROOT}/cluster/gce/ubuntu/master.yaml,configure-sh=${KUBE_ROOT}/cluster/gce/gci/configure.sh,cluster-name=${KUBE_TEMP}/cluster-name.txt,gci-update-strategy=${KUBE_TEMP}/gci-update.txt,gci-ensure-gke-docker=${KUBE_TEMP}/gci-ensure-gke-docker.txt,gci-docker-version=${KUBE_TEMP}/gci-docker-version.txt,kube-master-certs=${KUBE_TEMP}/kube-master-certs.yaml" \
-    --disk "name=${master_name}-pd,device-name=master-pd,mode=rw,boot=no,auto-delete=no" \
-    --boot-disk-size "${MASTER_ROOT_DISK_SIZE:-10}" \
-    ${preemptible_master}
-}
-
-function get-metadata() {
-  local zone="${1}"
-  local name="${2}"
-  local key="${3}"
-  gcloud compute ssh "${name}" \
-    --project "${PROJECT}" \
-    --zone "${zone}" \
-    --command "curl \"http://metadata.google.internal/computeMetadata/v1/instance/attributes/${key}\" -H \"Metadata-Flavor: Google\"" 2>/dev/null
-}

cluster/gce/ubuntu/master.yaml

-#cloud-config
-
-write_files:
-  - path: /etc/systemd/system/kube-master-installation.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Download and install k8s binaries and configurations
-      After=network-online.target
-
-      [Service]
-      Type=oneshot
-      RemainAfterExit=yes
-      ExecStartPre=/bin/mkdir -p /home/kubernetes/bin
-      ExecStartPre=/bin/mount --bind /home/kubernetes/bin /home/kubernetes/bin
-      ExecStartPre=/bin/mount -o remount,exec /home/kubernetes/bin
-      ExecStartPre=/usr/bin/curl --fail --retry 5 --retry-delay 3 --silent --show-error	-H "X-Google-Metadata-Request: True" -o /home/kubernetes/bin/configure.sh http://metadata.google.internal/computeMetadata/v1/instance/attributes/configure-sh
-      ExecStartPre=/bin/chmod 544 /home/kubernetes/bin/configure.sh
-      ExecStart=/home/kubernetes/bin/configure.sh
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kube-master-configuration.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Configure kubernetes master
-      After=kube-master-installation.service
-
-      [Service]
-      Type=oneshot
-      RemainAfterExit=yes
-      ExecStartPre=/bin/chmod 544 /home/kubernetes/bin/configure-helper.sh
-      ExecStart=/home/kubernetes/bin/configure-helper.sh
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kube-docker-monitor.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Kubernetes health monitoring for docker
-      After=kube-master-configuration.service
-
-      [Service]
-      Restart=always
-      RestartSec=10
-      RemainAfterExit=yes
-      RemainAfterExit=yes
-      ExecStartPre=/bin/chmod 544 /home/kubernetes/bin/health-monitor.sh
-      ExecStart=/home/kubernetes/bin/health-monitor.sh docker
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kubelet-monitor.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Kubernetes health monitoring for kubelet
-      After=kube-master-configuration.service
-
-      [Service]
-      Restart=always
-      RestartSec=10
-      RemainAfterExit=yes
-      RemainAfterExit=yes
-      ExecStartPre=/bin/chmod 544 /home/kubernetes/bin/health-monitor.sh
-      ExecStart=/home/kubernetes/bin/health-monitor.sh kubelet
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kube-logrotate.timer
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Hourly kube-logrotate invocation
-
-      [Timer]
-      OnCalendar=hourly
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kube-logrotate.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Kubernetes log rotation
-      After=kube-master-configuration.service
-
-      [Service]
-      Type=oneshot
-      ExecStart=-/usr/sbin/logrotate /etc/logrotate.conf
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kubernetes.target
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Kubernetes
-
-      [Install]
-      WantedBy=multi-user.target
-      After=docker.service
-
-runcmd:
- - systemctl daemon-reload
- - systemctl enable kube-master-installation.service
- - systemctl enable kube-master-configuration.service
- - systemctl enable kube-docker-monitor.service
- - systemctl enable kubelet-monitor.service
- - systemctl enable kube-logrotate.timer
- - systemctl enable kube-logrotate.service
- - systemctl enable kubernetes.target
- - systemctl start kubernetes.target

cluster/gce/ubuntu/node-helper.sh

-#!/bin/bash
-
-# Copyright 2016 The Kubernetes Authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# A library of helper functions and constant for GCI distro
-source "${KUBE_ROOT}/cluster/gce/gci/helper.sh"
-
-# $1: template name (required).
-function create-node-instance-template {
-  local template_name="$1"
-  ensure-gci-metadata-files
-  create-node-template "$template_name" "${scope_flags[*]}" \
-    "kube-env=${KUBE_TEMP}/node-kube-env.yaml" \
-    "user-data=${KUBE_ROOT}/cluster/gce/ubuntu/node.yaml" \
-    "configure-sh=${KUBE_ROOT}/cluster/gce/gci/configure.sh" \
-    "cluster-name=${KUBE_TEMP}/cluster-name.txt" \
-    "gci-update-strategy=${KUBE_TEMP}/gci-update.txt" \
-    "gci-ensure-gke-docker=${KUBE_TEMP}/gci-ensure-gke-docker.txt" \
-    "gci-docker-version=${KUBE_TEMP}/gci-docker-version.txt"
-}

cluster/gce/ubuntu/node.yaml

-#cloud-config
-
-write_files:
-  - path: /etc/systemd/system/kube-node-installation.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Download and install k8s binaries and configurations
-      After=network-online.target
-
-      [Service]
-      Type=oneshot
-      RemainAfterExit=yes
-      ExecStartPre=/bin/mkdir -p /home/kubernetes/bin
-      ExecStartPre=/bin/mount --bind /home/kubernetes/bin /home/kubernetes/bin
-      ExecStartPre=/bin/mount -o remount,exec /home/kubernetes/bin
-      ExecStartPre=/usr/bin/curl --fail --retry 5 --retry-delay 3 --silent --show-error	-H "X-Google-Metadata-Request: True" -o /home/kubernetes/bin/configure.sh http://metadata.google.internal/computeMetadata/v1/instance/attributes/configure-sh
-      ExecStartPre=/bin/chmod 544 /home/kubernetes/bin/configure.sh
-      ExecStart=/home/kubernetes/bin/configure.sh
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kube-node-configuration.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Configure kubernetes node
-      After=kube-node-installation.service
-
-      [Service]
-      Type=oneshot
-      RemainAfterExit=yes
-      ExecStartPre=/bin/chmod 544 /home/kubernetes/bin/configure-helper.sh
-      ExecStart=/home/kubernetes/bin/configure-helper.sh
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kube-docker-monitor.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Kubernetes health monitoring for docker
-      After=kube-node-configuration.service
-
-      [Service]
-      Restart=always
-      RestartSec=10
-      RemainAfterExit=yes
-      RemainAfterExit=yes
-      ExecStartPre=/bin/chmod 544 /home/kubernetes/bin/health-monitor.sh
-      ExecStart=/home/kubernetes/bin/health-monitor.sh docker
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kubelet-monitor.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Kubernetes health monitoring for kubelet
-      After=kube-node-configuration.service
-
-      [Service]
-      Restart=always
-      RestartSec=10
-      RemainAfterExit=yes
-      RemainAfterExit=yes
-      ExecStartPre=/bin/chmod 544 /home/kubernetes/bin/health-monitor.sh
-      ExecStart=/home/kubernetes/bin/health-monitor.sh kubelet
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kube-logrotate.timer
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Hourly kube-logrotate invocation
-
-      [Timer]
-      OnCalendar=hourly
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kube-logrotate.service
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Kubernetes log rotation
-      After=kube-node-configuration.service
-
-      [Service]
-      Type=oneshot
-      ExecStart=-/usr/sbin/logrotate /etc/logrotate.conf
-
-      [Install]
-      WantedBy=kubernetes.target
-
-  - path: /etc/systemd/system/kubernetes.target
-    permissions: 0644
-    owner: root
-    content: |
-      [Unit]
-      Description=Kubernetes
-
-      [Install]
-      WantedBy=multi-user.target
-      After=docker.service
-
-runcmd:
- - systemctl daemon-reload
- - systemctl enable kube-node-installation.service
- - systemctl enable kube-node-configuration.service
- - systemctl enable kube-docker-monitor.service
- - systemctl enable kubelet-monitor.service
- - systemctl enable kube-logrotate.timer
- - systemctl enable kube-logrotate.service
- - systemctl enable kubernetes.target
- - systemctl start kubernetes.target

cluster/gce/util.sh

 #!/bin/bash
 
-# Copyright 2014 The Kubernetes Authors.
+# Copyright 2017 The Kubernetes Authors.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -45,13 +45,10 @@ if [[ "${MASTER_OS_DISTRIBUTION}" == "gci" ]]; then
 elif [[ "${MASTER_OS_DISTRIBUTION}" == "debian" ]]; then
   MASTER_IMAGE=${KUBE_GCE_MASTER_IMAGE:-${CVM_VERSION}}
   MASTER_IMAGE_PROJECT=${KUBE_GCE_MASTER_PROJECT:-google-containers}
-elif [[ "${MASTER_OS_DISTRIBUTION}" == "ubuntu" ]]; then
-  MASTER_IMAGE=${KUBE_GCE_MASTER_IMAGE}
-  MASTER_IMAGE_PROJECT=${KUBE_GCE_MASTER_PROJECT}
 fi
 
 # Sets node image based on the specified os distro. Currently this function only
-# supports gci, debian, and ubuntu.
+# supports gci and debian.
 function set-node-image() {
   if [[ "${NODE_OS_DISTRIBUTION}" == "gci" ]]; then
     # If the node image is not set, we use the latest GCI image.
@@ -61,9 +58,6 @@ function set-node-image() {
   elif [[ "${NODE_OS_DISTRIBUTION}" == "debian" ]]; then
     NODE_IMAGE=${KUBE_GCE_NODE_IMAGE:-${CVM_VERSION}}
     NODE_IMAGE_PROJECT=${KUBE_GCE_NODE_PROJECT:-google-containers}
-  elif [[ "${NODE_OS_DISTRIBUTION}" == "ubuntu" ]]; then
-    NODE_IMAGE=${KUBE_GCE_NODE_IMAGE}
-    NODE_IMAGE_PROJECT=${KUBE_GCE_NODE_PROJECT}
   fi
 }