Fixed typos and issues in examples/volumes/glusterfs/README.md

examples/volumes/glusterfs/README.md

-## Glusterfs
+## GlusterFS
 
-[Glusterfs](http://www.gluster.org) is an open source scale-out filesystem. These examples provide information about how to allow containers use Glusterfs volumes.
+[GlusterFS](http://www.gluster.org) is an open source scale-out filesystem. These examples provide information about how to allow containers use GlusterFS volumes.
 
-The example assumes that you have already set up a Glusterfs server cluster and the Glusterfs client package is installed on all Kubernetes nodes.
+The example assumes that you have already set up a GlusterFS server cluster and have a working GlusterFS volume ready to use in the containers.
 
 ### Prerequisites
 
-Set up Glusterfs server cluster; install Glusterfs client package on the Kubernetes nodes. ([Guide](http://gluster.readthedocs.io/en/latest/Administrator%20Guide/))
+* Set up a GlusterFS server cluster
+* Create a GlusterFS volume
+* If you are not using hyperkube, you may need to install the GlusterFS client package on the Kubernetes nodes ([Guide](http://gluster.readthedocs.io/en/latest/Administrator%20Guide/))
 
 ### Create endpoints
 
-Here is a snippet of [glusterfs-endpoints.json](glusterfs-endpoints.json),
+The first step is to create the GlusterFS endpoints definition in Kubernetes. Here is a snippet of [glusterfs-endpoints.json](glusterfs-endpoints.json):
 
 ```
-      "addresses": [
+  "subsets": [
     {
-          "IP": "10.240.106.152"
-        }
-      ],
-      "ports": [
+      "addresses": [{ "ip": "10.240.106.152" }],
+      "ports": [{ "port": 1 }]
+    },
     {
-          "port": 1
+      "addresses": [{ "ip": "10.240.79.157" }],
+      "ports": [{ "port": 1 }]
     }
   ]
-
 ```
 
-The "IP" field should be filled with the address of a node in the Glusterfs server cluster. In this example, it is fine to give any valid value (from 1 to 65535) to the "port" field.
+The `subsets` field should be populated with the addresses of the nodes in the GlusterFS cluster. It is fine to provide any valid value (from 1 to 65535) in the `port` field.
 
-Create the endpoints,
+Create the endpoints:
 
 ```sh
 $ kubectl create -f examples/volumes/glusterfs/glusterfs-endpoints.json
@@ -42,7 +43,7 @@ NAME                ENDPOINTS
 glusterfs-cluster   10.240.106.152:1,10.240.79.157:1
 ```
 
-We need also create a service for this endpoints, so that the endpoints will be persistented. We will add this service without a selector to tell Kubernetes we want to add its endpoints manually. You can see [glusterfs-service.json](glusterfs-service.json) for details.
+We also need to create a service for these endpoints, so that they will persist. We will add this service without a selector to tell Kubernetes we want to add its endpoints manually. You can see [glusterfs-service.json](glusterfs-service.json) for details.
 
 Use this command to create the service:
 
@@ -51,24 +52,26 @@ $ kubectl create -f examples/volumes/glusterfs/glusterfs-service.json
 ```
 
 
-### Create a POD
+### Create a Pod
 
-The following *volume* spec in [glusterfs-pod.json](glusterfs-pod.json) illustrates a sample configuration.
+The following *volume* spec in [glusterfs-pod.json](glusterfs-pod.json) illustrates a sample configuration:
 
 ```json
-{
+"volumes": [
+  {
     "name": "glusterfsvol",
     "glusterfs": {
       "endpoints": "glusterfs-cluster",
       "path": "kube_vol",
       "readOnly": true
     }
-}
+  }
+]
 ```
 
 The parameters are explained as the followings.
 
-- **endpoints** is endpoints name that represents a Gluster cluster configuration. *kubelet* is optimized to avoid mount storm, it will randomly pick one from the endpoints to mount. If this host is unresponsive, the next Gluster host in the endpoints is automatically selected.
+- **endpoints** is the name of the Endpoints object that represents a Gluster cluster configuration. *kubelet* is optimized to avoid mount storm, it will randomly pick one from the endpoints to mount. If this host is unresponsive, the next Gluster host in the endpoints is automatically selected.
 - **path** is the Glusterfs volume name.
 - **readOnly** is the boolean that sets the mountpoint readOnly or readWrite.
 
@@ -84,17 +87,13 @@ You can verify that the pod is running:
 $ kubectl get pods
 NAME             READY     STATUS    RESTARTS   AGE
 glusterfs        1/1       Running   0          3m
-
-$ kubectl get pods glusterfs -t '{{.status.hostIP}}{{"\n"}}'
-10.240.169.172
 ```
 
-You may ssh to the host (the hostIP) and run 'mount' to see if the Glusterfs volume is mounted,
+You may execute the command `mount` inside the container to see if the GlusterFS volume is mounted correctly:
 
 ```sh
-$ mount | grep kube_vol
-10.240.106.152:kube_vol on /var/lib/kubelet/pods/f164a571-fa68-11e4-ad5c-42010af019b7/volumes/kubernetes.io~glusterfs/glusterfsvol type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)
-```
+$ kubectl exec glusterfs -- mount | grep gluster
+10.240.106.152:kube_vol on /mnt/glusterfs type fuse.glusterfs (rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)```
 
 You may also run `docker ps` on the host to see the actual container.
 

examples/volumes/glusterfs/glusterfs-pod.json

@@ -8,7 +8,7 @@
         "containers": [
             {
                 "name": "glusterfs",
-                "image": "kubernetes/pause",
+                "image": "nginx",
                 "volumeMounts": [
                     {
                         "mountPath": "/mnt/glusterfs",