Launch kubemark with an existing Kubemark Master

cluster/kubemark/pre-existing/config-default.sh

+#!/bin/bash
+# Copyright 2017 The Kubernetes Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Configuration for landing a Kubemark cluster on a pre-existing Kubernetes
+# cluster.
+
+# Pre-existing provider expects a MASTER_IP.
+# If you need to specify a port that's not the default (443), add it to MASTER_IP.
+#
+# Example: Connect to the Master on the secure port 6443
+#          MASTER_IP=192.168.122.5:6443
+#
+MASTER_IP="${MASTER_IP:-}"
+
+# The container registry and project given to the kubemark container:
+#   $CONTAINER_REGISTRY/$PROJECT/kubemark
+#
+CONTAINER_REGISTRY="${CONTAINER_REGISTRY:-}"
+PROJECT="${PROJECT:-}"
+
+NUM_NODES="${NUM_NODES:-1}"
+
+TEST_CLUSTER_API_CONTENT_TYPE="${TEST_CLUSTER_API_CONTENT_TYPE:-}"
+KUBELET_TEST_LOG_LEVEL="${KUBELET_TEST_LOG_LEVEL:-}"
+KUBEPROXY_TEST_LOG_LEVEL="${KUBEPROXY_TEST_LOG_LEVEL:-}"
+MASTER_NAME="${MASTER_NAME:-}"
+USE_REAL_PROXIER="${USE_REAL_PROXIER:-true}"

cluster/pre-existing/util.sh

+#!/bin/bash
+
+# Copyright 2017 The Kubernetes Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# A library of helper functions for landing kubemark containers on a
+# pre-existing Kubernetes master. See test/kubemark/pre-existing/README.md
+# for me details on using a pre-existing provider.
+
+KUBE_ROOT=$(dirname "${BASH_SOURCE}")/../..
+
+source "${KUBE_ROOT}/cluster/common.sh"
+source "${KUBE_ROOT}/hack/lib/util.sh"
+
+function detect-project() {
+  if [[ -z "${MASTER_IP:-}" ]]; then
+    echo "Set 'MASTER_IP' to the instance assigned to be the Kubernetes master" 1>&2
+    exit 1
+  fi
+
+  if [[ -z "${PROJECT:-}" ]]; then
+    echo "Set 'PROJECT' to the name of the container project: $CONTAINER_REGISTRY/$PROJECT/kubemark" >&2
+    exit 1
+  fi
+
+  if [[ -z "${SERVICE_CLUSTER_IP_RANGE:-}" ]]; then
+    cluster_range=$(echo "${MASTER_IP}" | awk -F '.' '{printf("%d.%d.%d.0", $1, $2, $3)}')
+    SERVICE_CLUSTER_IP_RANGE="${SERVICE_CLUSTER_IP_RANGE:-$cluster_range/16}"
+  fi
+}
+
+function create-certs {
+  rm /tmp/kubeconfig
+
+  execute-cmd-on-pre-existing-master-with-retries "sudo cat /etc/kubernetes/admin.conf" > /tmp/kubeconfig
+  CA_CERT_BASE64=$(cat /tmp/kubeconfig | grep certificate-authority | awk '{print $2}' | head -n 1)
+  KUBELET_CERT_BASE64=$(cat /tmp/kubeconfig | grep client-certificate-data | awk '{print $2}' | head -n 1)
+  KUBELET_KEY_BASE64=$(cat /tmp/kubeconfig | grep client-key-data | awk '{print $2}' | head -n 1)
+
+  # Local kubeconfig.kubemark vars
+  KUBECFG_CERT_BASE64="${KUBELET_CERT_BASE64}"
+  KUBECFG_KEY_BASE64="${KUBELET_KEY_BASE64}"
+
+  # The pre-existing Kubernetes master already has these setup
+  # Set these vars but don't use them
+  CA_KEY_BASE64=$(dd if=/dev/urandom bs=128 count=1 2>/dev/null | base64 | tr -d "=+/" | dd bs=32 count=1 2>/dev/null)
+  MASTER_CERT_BASE64=$(dd if=/dev/urandom bs=128 count=1 2>/dev/null | base64 | tr -d "=+/" | dd bs=32 count=1 2>/dev/null)
+  MASTER_KEY_BASE64=$(dd if=/dev/urandom bs=128 count=1 2>/dev/null | base64 | tr -d "=+/" | dd bs=32 count=1 2>/dev/null)
+  KUBEAPISERVER_CERT_BASE64=$(dd if=/dev/urandom bs=128 count=1 2>/dev/null | base64 | tr -d "=+/" | dd bs=32 count=1 2>/dev/null)
+  KUBEAPISERVER_KEY_BASE64=$(dd if=/dev/urandom bs=128 count=1 2>/dev/null | base64 | tr -d "=+/" | dd bs=32 count=1 2>/dev/null)
+}

test/kubemark/common/util.sh

+#!/bin/bash
+
+# Copyright 2017 The Kubernetes Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Running cmd $RETRIES times in case of failures.
+function run-cmd-with-retries {
+  RETRIES="${RETRIES:-3}"
+  for attempt in $(seq 1 ${RETRIES}); do
+    exec 5>&1 # Duplicate &1 to &5 for use below.
+    # We don't use 'local' to declare result as then ret_val always gets value 0.
+    # We use tee to output to &5 (redirected to stdout) while also storing it in the variable.
+    result=$("$@" 2>&1 | tee >(cat - >&5)) || local ret_val="$?"
+    if [[ "${ret_val:-0}" -ne "0" ]]; then
+      if [[ $(echo "${result}" | grep -c "already exists") -gt 0 ]]; then
+        if [[ "${attempt}" == 1 ]]; then
+          echo -e "${color_red}Failed to $1 $2 $3 as the resource hasn't been deleted from a previous run.${color_norm}" >& 2
+          exit 1
+        fi
+        echo -e "${color_yellow}Succeeded to $1 $2 $3 in the previous attempt, but status response wasn't received.${color_norm}"
+        return 0
+      fi
+      echo -e "${color_yellow}Attempt $attempt failed to $1 $2 $3. Retrying.${color_norm}" >& 2
+      sleep $(($attempt * 5))
+    else
+      echo -e "${color_green}Succeeded to $1 $2 $3.${color_norm}"
+      return 0
+    fi
+  done
+  echo -e "${color_red}Failed to $1 $2 $3.${color_norm}" >& 2
+  exit 1
+}

test/kubemark/gce/util.sh

@@ -14,34 +14,15 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
+KUBE_ROOT=$(dirname "${BASH_SOURCE}")/../../..
+
+source "${KUBE_ROOT}/test/kubemark/common/util.sh"
+
 # Wrapper for gcloud compute, running it $RETRIES times in case of failures.
 # Args:
 # $@: all stuff that goes after 'gcloud compute'
 function run-gcloud-compute-with-retries {
-  RETRIES="${RETRIES:-3}"
-  for attempt in $(seq 1 ${RETRIES}); do
-    exec 5>&1  # Duplicate &1 to &5 for use below.
-    # We don't use 'local' to declare gcloud_result as then ret_val always gets value 0.
-    # We use tee to output to &5 (redirected to stdout) while also storing it in the variable.
-    gcloud_result=$(gcloud compute "$@" 2>&1 | tee >(cat - >&5)) || local ret_val="$?"
-    if [[ "${ret_val:-0}" -ne "0" ]]; then
-      if [[ $(echo "${gcloud_result}" | grep -c "already exists") -gt 0 ]]; then
-        if [[ "${attempt}" == 1 ]]; then
-          echo -e "${color_red}Failed to $1 $2 $3 as the resource hasn't been deleted from a previous run.${color_norm}" >& 2
-          exit 1
-        fi
-        echo -e "${color_yellow}Succeeded to $1 $2 $3 in the previous attempt, but status response wasn't received.${color_norm}"
-        return 0
-      fi
-      echo -e "${color_yellow}Attempt $attempt failed to $1 $2 $3. Retrying.${color_norm}" >& 2
-      sleep $(($attempt * 5))
-    else
-      echo -e "${color_green}Succeeded to gcloud compute $1 $2 $3.${color_norm}"
-      return 0
-    fi
-  done
-  echo -e "${color_red}Failed to $1 $2 $3.${color_norm}" >& 2
-  exit 1
+  run-cmd-with-retries gcloud compute "$@"
 }
 
 function create-master-instance-with-resources {

test/kubemark/pre-existing/util.sh

+#!/bin/bash
+
+# Copyright 2017 The Kubernetes Authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+KUBE_ROOT=$(dirname "${BASH_SOURCE}")/../../..
+
+source "${KUBE_ROOT}/test/kubemark/common/util.sh"
+
+# Leave the skeleton definition of execute-cmd-on-master-with-retries
+# so only the pre-existing provider functions will target this.
+function execute-cmd-on-pre-existing-master-with-retries() {
+  IP_WITHOUT_PORT=$(echo "${MASTER_IP}" | cut -f 1 -d ':') || "${MASTER_IP}"
+
+  RETRIES="${2:-1}" run-cmd-with-retries ssh kubernetes@"${IP_WITHOUT_PORT}" $1
+}